Proposed Construction Of Stage Compound Wall, And Dressing Room Along With Children Playground Equipments At Pandugal In Ward No. 6 Of Village Panchayat At Xeldem In Curchorem Constituency.(Mla-Lad Scheme)-Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area. 2 Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in: b) All types of Ordinary rock including all types of laterite rock, blasting prohibited 3 Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in widthor 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50 m. a) All kinds of soil. 4 b) All types of Ordinary rock including all types of laterite rock, blasting prohibited 5 Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. 6 Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 river pebbles 40mm nominal size) excluding cost of centering, shuttering and finishing in: a) All works upto plinth level 7 Providing & laying damp proof course 25 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg. 10 mm nominal size). 8 Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1cement:4 coarse sand) in foundation and basement. 9 Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1cement:4 coarse sand)in foundation and basement. Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. 10 Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size).a) All works upto plinth level 11 b) In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level 12 c) In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level 13 Centering & shuttering including Strutting, Propping & removal of forms for : i) Foundations, Footings, Bases for columns 14 iii) Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan) 15 iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth 16 xiii) Suspended floors, roofs landings, shelves & their supports. 17 Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) (Confirming to IS 1786 of 1986)for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floorsalongwith the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. 18 Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. b) Second class Indian teak wood 19 Providing& fixing flush door shutters decoration type core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneeringwith vertical grains and cross bands and face veneers on both faces of shutters. b) 35mm thick including anodized aluminium butt hinges with necessary screws: Extra for providing vision panel not exceeding 0.1 sq.m. in all types of flush doors (cost of glass excluded). a) Rectangular or squareUnit: SQ.M. door area 20 Providing and fixing bright finished brass handles with necessary screws etc complete a) 125 mm 21 Providing and fixing bright finished brass door latch with necessary screws etc complete b) 250 x 16 x 5 mm 22 Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete a) 250 x 10 mm 23 Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by screws. a) Plain grill 24 Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section. c) Figured glass Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section 25 Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing &complete with base of cement mortar 1:4 (1 cement: 4 coarse sand)a) 20mm thick. 26 d) Providing and fixing Colouron Plus galvulium roofing Sheets of 0.45mm thick double ribbed trapezoidal profile coated 1080mmwith cover width of 1020mmincluding all the accessories (JSW or equivalent make ) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. 27 equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete. a)140 mm nominal size 28 Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes ofapproved including lubricant etc. complete (single/double) socketed: b)75 mm dia 29 12mm cement plaster 1:4 (1 cement : 4 fine sand) 30 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) 31 Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 32 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and top layer 6mm thick with cement plaster 1:3 (1 cement: 3 coarse sand) finished with sponge. 33 Finishing fine with neeru over plaster. 34 Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. 35 Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. 36 Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. 37 Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. 38 Providing and fixing prefabricated compoundgate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basalticaggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. 39 Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. a) Sand 40 Providing and laying in design & pattern factory made chamfered edge Cement Concrete paver blocks ( C. C. paver blocks) of M35/M40 strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator, filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer. b)60mm thick with Red/ Black colour (M35 grade) 41 Half brick masonry in cement mortar 1:3 (1 cement : 3 coarsesand) with bricks of class designation 75 kg /cm2. a)In foundation and plinth. 42 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW, APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 43 Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. a)In R.S. joists, channels, angles, tees 44 Providing and fixing in Position 6 Seated Merry Go Round with transportation, installation, labour and making good for functioning as per the Engineer-in-charge. 45 Providing and fixing in PositionDouble Slide with transportation, installation, labour and making good for functioning as per the Engineer-in-charge. 46 Providing and fixing in PositionDouble See Saw with transportation, installation, labour and making good for functioning as per the Engineer-in-charge. 47 Providing and fixing in PositionHorse Spring Ride with transportation, installation, labour and making good for functioning as per the Engineer-in-charge. 48 Providing and fixing in PositionFancy Dustbin with transportation, installation, labour and making good for functioning as per the Engineer-in-charge.
