Tender For Construction Of Outdoor Zym At Vill. Bhudion Block Barara And Supply Of Open Gym Equipments In Panchayati Land Opposite Of Shiv Mandir In Village Barnala Block Ambala-Ii, Ambala-Haryana

Tender For Construction of Outdoor Zym at Vill. Bhudion Block Barara and Supply of open Gym equipments in Panchayati land opposite of Shiv Mandir in village Barnala Block Ambala-II-- 1 (All Detail in PDF Item no 1)Providing, designing and fixing Leg press size 153x137x152 cmfabricated with 2”x4” rectangular hollow pipe with 3.00 mm thick andpowder coated using Akzo Nobel or equivalent of 80-120 micronthick. All welding joints of pipe are well welded with jointsscalloped as necessary and dressed off removing sharp edges andburrs. Zinc primer paint to be applied at all welding points prior tofinishing. Handle bars are to be provided with high quality griprubber at top end. Padals shall be made up of Nylon alloy withrounded edge of prevent any impact of injury and seat to be madefrom virgin LLDPE manufactured by rotational moulding withminimum thickness of plastic 4.00mm, colourful and U V resistantenvironmental friendly. Bearing used shall be maintenance free, dulyoiled sealed and self lubricated made by reputed company to beapproved by Engineer-in-Charge. Equipment to be fitted withinbuilt limiters to prevent unwanted movements. All open ends ofpipe to be coloured by GI/LLDPE caps for user safety. The equipmentto be fixed on ground with concrete of minimum strength M25 and Jshaped welded bolts and once the concrete is set, fix the equipmenton to it and cover nuts and bolts with the base plate cover, allcomplete as per direction and approval of Engineer-in-Chargeregarding material, shape of equipment, colour on metal, seat andbasecover plate andfixing of equipment etc 2 Air Swing: Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational 3 `Pull Chair:- Providing, designing and fixing ofPullpair ofsize 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized,and powder coated usingAkzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing.Handle bars are to be provided with high quality grip rubber at top end. Padalsshall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to bemade from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful andU V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc.` 4 3.Twister :-Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2`x4` rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zine primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made byreputed company to be approved by Engineer- in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE: caps for user safety. The equipment tobe fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. 5 Bridge Ladder :-Product type Playing ColourYour choiseSize 10’feetMaterialIron CustomizedYes Age Group8 to 20 Size2.0 X2.0 X mtr/3.0 Mtr.All joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved byEngineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GIALLDPE caps for user safely. The equipment to be fixed on ground with concrete of minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. 6 5. SEE Saw :- Product type Playing Material Mild steel Size6 Feet Age groupup to 12Seating2 seaterAll Joint shall be lubricated made by reputed company and powder coated using Akzo or equipment of 80-120 micron thick. All welding joints of pipe are well welded with jointed scalloped a necessary and dressed off welded with joints scalloped a necessary and dressed off removing sharp edge and burrsto be approved by Engineer in charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPWE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cove nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer in Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. 7 Abb Trainer / Sit upBrench Main post- 114mmpipe sze - 2`x4` thickness of Pipe - 3mmPipe Standard : GPPost caps: Aluminium/LLDPEScrew otheer - Nylon Lock Bolt Material: Mild SteelHolding capacity: 120 kgAge Group: 13 plus 8 DOUBLE CROSS WALKER FOR OPEN GYM 9 Cycle 10 8. LEG Press Centre main Pipe 114mm B class (3mm to 3.5 thickness)Sitting pipe 40mm B class (3mm to 3.5 thickness)Both side vertical structure pipe 40mmSeat metallic sheet 3mm to 3.5 mm MSFootrest MS checked plate 4mm thicknessPermanent lubricated sealed bearing of reputed brand Nuts and Bolts GalvanizedNylon covers for covering the nuts and bolts. 11 Providing and designing and fixing Push Up Bar complete all respect.

INR 1000 /-

INR 21205.0 /-

INR 3.59 Lakhs /-