Bids Are Invited For Custom Bid for Services - Tender for annual rate contract for Aluminum and UPVC works at MRPL Plant and Township as per BOQ Bidder has to quote Lumpsum price higher or lower than the SOR Value including GST as per BOQ, SUPPLYING AND FIXING OF ALUMINIUM PARTITION FOR DOOR USING 63.50MMX38.10MMX1.2MM ALUMINIUM SECTIONS (JINDAL/ INDAL) AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) WITHOUT PRE LAMINATED “NOVAPAN” BOARD FOR DOOR SHUTTER, DOOR FRAME FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., INCLUDING PIVOT/ HINGES, 2 NOS. 150MM TOWERBOLT, 2 NOS. 100MM DOOR HANDLE, DOOR LOCK WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION FOR DOOR USING 63.50MMX38.10MMX1.2MM ALUMINIUM SECTIONS (JINDAL/ INDAL) FIXING WITH PRE LAMINATED “NOVAPAN” BOARD AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) FOR DOOR SHUTTER, DOOR FRAME FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., INCLUDING PIVOT/ HINGES, 2 NOS. 150MM TOWERBOLT, 2 NOS. 100MM DOOR HANDLE, DOOR LOCK WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION USING 63.50MMX38.10MMX1.2MM ALUMINIUM SECTIONS (JINDAL/ INDAL) FIXING WITH PRE LAMINATED “NOVAPAN” BOARD AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION USING 63.50MMX38.10MMX1.2MM ALUMINIUM SECTIONS (JINDAL/ INDAL) AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) WITHOUT PRE LAMINATED “NOVAPAN” BOARD FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION FOR DOOR USING 63.50MMX38.10MMX1.2MM ALUMINIUM SECTIONS (JINDAL/ INDAL) AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) WITHOUT PRE LAMINATED NOVAPAN BOARD FOR DOOR SHUTTER, DOOR FRAME FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS ANODISED 12 TO 15 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, S TIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., INCLUDING PIVOT/ HINGES, 2 NOS. 150MM TOWERBOLT, 2 NOS. 100MM DOOR HANDLE, DOOR LOCK WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION FOR DOOR USING 63.50MMX38.10MMX1.2MM ALUMINIUM SECTIONS (JINDAL/ INDAL) FIXING WITH PRE LAMINATED NOVAPAN BOARD AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) FOR DOOR SHUTTER, DOOR FRAME FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS ANODISED 12 TO 15 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., INCLUDING PIVOT/ HINGES, 2 NOS. 150MM TOWERBOLT, 2 NOS. 100MM DOOR HANDLE, DOOR L OCK WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION USING 63.50MMX38.10MMX1.2MM ALUMINIUM SECTIONS (JINDAL/ INDAL) FIXING WITH PRE LAMINATED NOVAPAN BOARD AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS ANODISED 12 TO 15 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION USING 63.50MMX38.10MMX1.2MM ALUMINIUM SECTIONS (JINDAL/ INDAL) AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) WITHOUT PRE LAMINATED NOVAPAN BOARD FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS ANODISED 12 TO 15 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION FOR DOOR USING 63.50MMX38.10MMX1.0MM ALUMINIUM SECTIONS (JINDAL/ INDAL) AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) WITHOUT PRE LAMINATED “NOVAPAN” BOARD FOR DOOR SHUTTER, DOOR FRAME FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., INCLUDING PIVOT/ HINGES, 2 NOS. 150MM TOWERBOLT, 2 NOS. 100MM DOOR HANDLE, DOOR LOCK WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION FOR DOOR USING 63.50MMX38.10MMX1.0MM ALUMINIUM SECTIONS (JINDAL/ INDAL) FIXING WITH PRE LAMINATED “NOVAPAN” BOARD AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) FOR DOOR SHUTTER, DOOR FRAME FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., INCLUDING PIVOT/ HINGES, 2 NOS. 150MM TOWERBOLT, 2 NOS. 100MM DOOR HANDLE, DOOR LOCK WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION USING 63.50MMX38.10MMX1.0MM ALUMINIUM SECTIONS (JINDAL/ INDAL) FIXING WITH PRE LAMINATED “NOVAPAN” BOARD AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION USING 63.50MMX38.10MMX1.0MM ALUMINIUM SECTIONS (JINDAL/ INDAL) AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) WITHOUT PRE LAMINATED “NOVAPAN” BOARD FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION FOR DOOR USING 63.50MMX38.10MMX1.0MM ALUMINIUM SECTIONS (JINDAL/ INDAL) AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) WITHOUT PRE LAMINATED NOVAPAN BOARD FOR DOOR SHUTTER, DOOR FRAME FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS ANODISED 12 TO 15 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, S TIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., INCLUDING PIVOT/ HINGES, 2 NOS. 150MM TOWERBOLT, 2 NOS. 100MM DOOR HANDLE, DOOR LOCK WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION FOR DOOR USING 63.50MMX38.10MMX1.0MM ALUMINIUM SECTIONS (JINDAL/ INDAL) FIXING WITH PRE LAMINATED NOVAPAN BOARD AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) FOR DOOR SHUTTER, DOOR FRAME FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS ANODISED 12 TO 15 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., INCLUDING PIVOT/ HINGES, 2 NOS. 150MM TOWERBOLT, 2 NOS. 100MM DOOR HANDLE, DOOR L OCK WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION USING 63.50MMX38.10MMX1.0MM ALUMINIUM SECTIONS (JINDAL/ INDAL) FIXING WITH PRE LAMINATED NOVAPAN BOARD AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS ANODISED 12 TO 15 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC. SUPPLYING AND FIXING OF ALUMINIUM PARTITION USING 63.50MMX38.10MMX1.0MM ALUMINIUM SECTIONS (JINDAL/ INDAL) AND FIXING 5MM PLAIN GLASS (MODI /ASAI/SAINT GOBAIN) WITHOUT PRE LAMINATED NOVAPAN BOARD FITTED WITH EPDM RUBBER / NEOPRENE GASKET BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS ANODISED 12 TO 15 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING MANPOWER, TOOLS TACKLES, TRANSPORTATION TO SITE ALL COMPLETE AND AS DIRECTED BY EIC SUPPLYING AND FIXING NOVAPAN BOARD 9MM THICK FOR OLD ALUMINIUM SECTIONS (DOORS AND PARTITIONS SUPPLIED BY MRPL) PROVIDING AND INSTALLATION OF MESH DOOR PANEL IN EXISTING WOODEN DOOR FRAME WITH POWER COATED ALUMINIUM SECTION 40MMX18MMX1.55MM WEIGHT 0.547 KG/M, MINIMUM POWDER COATING 50 MICRONS, TOP, BOTTOM AND SIDES MADE OF SINGLE FRAME AND MIDDLE FOR LOCK RAIL WITH DOUBLE FRAME SECTION PROVIDED WITH STAINLESS STEEL 304 GRADE EPOXY COATED MESH 0.19MM THICK WITH 18 X 20 PER SQ INCH FIXED WITH ALUMINIUM STRIP USING SS SCREWS SPACING 250 MM C/C WITH FIXTURES SUCH AS 100MM LONG SS HINGES – 3 NOS, 100MM LONG ALUMINIUM HANDLE – 2 NOS, 100MM LONG ALUMINIUM TOWER BOLT – 2NOS, 50MM MAGNETIC CATCHER – 1 NO INCLUDING ALL REQUIRED FITTING, TOOLS, TACKLES INCLUDING FABRICATION CHARGES AND REQUIRED MANPOWER AND MACHINERY RESOURCES ALL COMPLETE AS PER THE SPECIFICATION, DRAWINGS AND AS PER THE DIRECTIONS AND GUIDANCE OF EIC. ALUMINIUM SECTION FOR PANNELLING, SHUTTERS OF DOORS, WINDOWS & VENTILATORS INCLUDING PROVIDING AND FIXING HINGES/ PIVOTS AND MAKING PROVISION FOR FIXING OF FITTINGS WHEREVER REQUIRED INCLUDING THE COST OF EPDM RUBBER / NEOPRENE GASKET REQUIRED (FITTINGS SHALL BE PAID FOR SEPARATELY) -COLOUR ANODISED ALUMINIUM (ANODISED TRANSPARENT OR DYED TO REQUIRED SHADE ACCORDING TO IS: 1868, MINIMUM ANODIC COATING OF GRADE AC 15 MICRONS) FOR ITEMS OTHER THAN BOQ ITEMS AS PER THE DIRECTIONS OF EIC. SUPPLYING AND FIXING FLOOR SPRING EVERITE SUPPLYING AND FIXING OF HYDRALIC DOOR CLOSER EVERITE / DYNA / GODREJ OF MAKE WITH NECESSARY SCREWS ETC. , MANPOWER, MATERIALS, TOOLS, TACKLES ETC. ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS. PROVIDING POWDER COATING ON EXISTING ALUMINIUM SECTIONS 60 TO 70 MICRONS INCLUDING TRANSPORTATION OF MATERIALS TO & FRO AS PER DIRECTIONS OF EIC. SUPPLYING AND FIXING ALUMINIUM DOOR ROD FOR FIXING THE DOOR SUPPLYING AND FIXING ALUMINIUM DOOR LOCK 6 LEVERS SUPPLYING AND FIXING ALUMINIUM DOOR LOCK 4 LEVERS SUPPLYING AND FIXING PIVOT FIXING FOR DOORS SUPPLY & FIXING ALUMINIUM ALDROPS OF 300 MM LONG WITH NECESSARY SCREWS ETC, COMPLETE SUPPLY & FIXING ALUMINIUM ALDROPS OF 250 MM LONG WITH NECESSARY SCREWS ETC COMPLETE SUPPLY & FIXING OF ALUMINIUM DOOR HANDLE OF 100 MM SUPPLY & FIXING OF ALUMINIUM TOWER BOLTS 125 MM SUPPLY & FIXING OF ALUMINIUM TOWER BOLTS 100 MM SUPPLY & FIXING OF ALUMINIUM TOWER BOLTS 75 MM REMOVAL & REFIXING OF ALUMINIUM WINDOWS FOR RUBBER BEADING, WINDOW WHEEL REPLACEMENT PURPOSE & SERVICING ALUMINIUM SECTION FOR PANNELLING, SHUTTERS OF DOORS, WINDOWS & VENTILATORS INCLUDING PROVIDING AND FIXING HINGES/PIVOTS AND MAKING PROVISION FOR FIXING OF FITTINGS WHEREVER REQUIRED INCLUDING THE COST OF EPDM RUBBER/ NEOPRENE GASKET REQUIRED (FITTINGS SHALL BE PAID FOR SEPARATELY) -COLOUR POWDER COATED ALUMINIUM (60 TO 70 MICRONS) FOR ITEMS OTHER THAN BOQ ITEMS AS PER THE DIRECTIONS OF EIC. PROVIDING AND FIXING IN POSITION Powder coated ALUMINIUM WINDOWS WITH SLIDING SHUTTERS USING TWO TRACK WINDOW FRAME OF SIZE 61.85MMX31.75MM BOTTOM SECTION 1.20MM THICK, WEIGHT 0.695KG/M; SIDES AND TOP SECTIONS 1.30 MM THICK, WEIGHT 0.659KG/M AND SHUTTER FRAME SECTION COMPRISING TOP AND BOTTOM SECTION OF SIZE 40MMX18MM, WALL THICKNESS 1.25MM. WEIGHT 0.417KG/M, SHUTTER OUTER SIDE 40MMX18MM WALL THICKNESS 1.25MM. WEIGHT 0.417 KG/M SHUTTER INTERLOCK SECTION 40MMX26.7MM WALL THICKNESS 1.1 MM THICK. WEIGHT 0.469KG/M. THE SHUTTERS MOUNTED ON NYLON ROLLERS WITH APPROVED QUALITY OF FIXTURES SUCH AS ALUMINIUM HANDLES, TOWER BOLTS ETC; PROVIDING AND FIXING 5 MM THICK PLAIN GLASS FOR SHUTTERS FITTED WITH RUBBER BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS REQUIRED TO COMPLETE AS PER THE DIRECTIONS OF EIC., PROVIDING AND FIXING IN POSITION POWDER COATED VENTILATORS FIXED WITH WINDOW FRAME OF SIZE 63.50MMX38.10MM OF 1.65MM THICK FOR SIDE BOTTOM AND TOP SECTIONS, WEIGHT 0.942 KG/M AND MAKING SLOTS WITH ALUMINIUM CHANNELS FOR FIXING TINTED GLASS LOUVERS OF 5 MM THICK FITTED WITH RUBBER BEADING, GLAZING CLIPS AND NECESSARY FIXTURES ETC ALL COMPLETE TO SUITE AT SITE CONDITIONS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, JOINTS MITRED SUBDIVIDING THE FRAME TENONNED AND RIVETTED, IN THE ASSEMBLED FRAME, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., AND FIXED TO THE WALLS, LINTELS, FLOOR BEAMS/SILLS AS THE CASE MAY BE WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING CUTTING MASONRY OR CONCRETE AND MAKING GOOD THE ORIGINAL SURFACE USING CEMENT MORTAR FOR BUILDINGS AT MRPL TOWNSHIP ALL COMPLETE AS PER DRAWINGS AND DIRECTED BY EIC. PROVIDING AND FIXING IN POSITION ANODIZED VENTILATORS FIXED WITH WINDOW FRAME OF SIZE 63.50MMX38.10MM OF 1.65MM THICK FOR SIDE BOTTOM AND TOP SECTIONS, WEIGHT 0.942 KG/M AND MAKING SLOTS WITH ALUMINIUM CHANNELS FOR FIXING TINTED GLASS LOUVERS OF 5 MM THICK FITTED WITH RUBBER BEADING, GLAZING CLIPS AND NECESSARY FIXTURES ETC ALL COMPLETE TO SUITE AT SITE CONDITIONS, ALL ALUMINIUM SECTIONS ANODISED 12 TO 15 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, JOINTS MITRED SUBDIVIDING THE FRAME TENONNED AND RIVETTED, IN THE ASSEMBLED FRAME, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., AND FIXED TO THE WALLS, LINTELS, FLOOR BEAMS/SILLS AS THE CASE MAY BE WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING CUTTING MASONRY OR CONCRETE AND MAKING GOOD THE ORIGINAL SURFACE USING CEMENT MORTAR FOR BUILDINGS AT MRPL TOWNSHIP ALL COMPLETE AS PER DRAWINGS AND DIRECTED BY EIC PROVIDING AND FIXING IN POSITION ANODIZED ALUMINIUM WINDOWS WITH SLIDING SHUTTERS USING TWO TRACK WINDOW FRAME OF SIZE 61.85MMX31.75MM BOTTOM SECTION 1.20MM THICK, WEIGHT 0.695KG/M; SIDES AND TOP SECTIONS 1.30 MM THICK, WEIGHT 0.659KG/M AND SHUTTER FRAME SECTION COMPRISING TOP AND BOTTOM SECTION OF SIZE 40MMX18MM, WALL THICKNESS 1.25MM. WEIGHT 0.417KG/M, SHUTTER OUTER SIDE 40MMX18MM WALL THICKNESS 1.25MM. WEIGHT 0.417 KG/M SHUTTER INTERLOCK SECTION 40MMX26.7MM WALL THICKNESS 1.1 MM THICK. WEIGHT 0.469KG/M. THE SHUTTERS MOUNTED ON NYLON ROLLERS WITH APPROVED QUALITY OF FIXTURES SUCH AS ALUMINIUM HANDLES, TOWER BOLTS ETC; PROVIDING AND FIXING 5 MM THICK PLAIN GLASS FOR SHUTTERS FITTED WITH RUBBER BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS REQUIRED TO COMPLETE AS PER THE DIRECTIONS OF EIC PROVIDING AND FIXING IN POSITION POWDER COATED ALUMINIUM OPENABLE WINDOW FRAME OF SIZE 63.50MMX38.10MM OF 1.65MM THICK FOR SIDE, BOTTOM AND TOP SECTIONS, WEIGHT 0.942 KG/M AND SHUTTER FRAME SECTION COMPRISING BOTTOM, TOP AND SIDE SECTION OF SIZE 40MMX18MM, WALL THICKNESS 1.25MM.WEIGHT 0.417KG/M WITH PLAIN GLASS OF 5MM THICK FITTED WITH RUBBER BEADING, GLAZING CLIPS AND WITH APPROVED QUALITY OF FIXTURES LIKE TOWER BOLTS, HINGES, SCREWS ETC ALL COMPLETE TO SUITE AT SITE CONDITIONS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, JOINTS MITRED SUBDIVIDING THE FRAME TENONNED AND RIVETTED, IN THE ASSEMBLED FRAME, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., AND FIXED TO THE WALLS, LINTELS, FLOOR BEAMS/SILLS AS THE CASE MAY BE WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING CUTTING MASONRY OR CONCRETE AND MAKING GOOD THE ORIGINAL SURFACE USING CEMENT MORTAR FOR BUILDINGS AT MRPL TOWNSHIP ALL COMPLETE AS PER DRAWINGS AND DIRECTED BY EIC PROVIDING AND FIXING IN POSITION POWDER COATED ALUMINIUM FIXED WINDOW FOR CORRIDOR AREA FRAME OF SIZE 63.50MMX38.10MM OF 1.65MMTHICK FOR SIDE, BOTTOM AND TOP SECTIONS, WEIGHT 0.942 KG/M WITH 5MM THICK PLAIN GLASS FITTED WITH RUBBER BEADING, GLAZING CLIPS AND WITH APPROVED QUALITY OF FIXTURES LIKE TOWER BOLTS, SCREWS ETC ALL COMPLETE TO SUITE AT SITE CONDITIONS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, JOINTS MITRED SUBDIVIDING THE FRAME TENONNED AND RIVETTED, IN THE ASSEMBLED FRAME, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., AND FIXED TO THE WALLS, LINTELS, FLOOR BEAMS/SILLS AS THE CASE MAY BE WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING CUTTING MASONRY OR CONCRETE AND MAKING GOOD THE ORIGINAL SURFACE USING CEMENT MORTAR FOR BUILDINGS AT MRPL TOWNSHIP ALL COMPLETE AS PER DRAWINGS AND DIRECTED BY EIC. ONLY FOR ALUMINIUM FRAME WITH USING 50 X 25MM RECTANGULAR TUBES FIXING TO WALLS/COLUMNS/BEAMS ETC INCLUDING ALL MATERIALS AND LABOUR CHARGES SUPPLYING AND FIXING OF FROSTED FILM INCLUDING TRANSPORTATION AT SITE. PROVIDING AND FIXING SS MESH SS304 HAVING 18 X 18 WIRES PER SQ.INCH & 1.36 KG/SQ.MT, COLOUR BLACK/ FOR ALUMINIUM WINDOWS AND EXHAUST FANS FOR MOSQUITOES AT PLANT, TOWN SHIP AND JETTY AREAS. SUPPLY & FIXING ETCHING GLASS STICKER FOR DOORS AND WINDOWS PROVIDING & FIXING POWDER COATED STAINLESS STEEL 304 GRADE EPOXY COATED MESH 0.19MM THICK WITH IS X 20 PER SQ INCH AS PER DIRECTIONS OF EIC PROVIDING AND FIXING NO-SEE-UM SCREENING (20 X 20 WIRES PER SQ INCH) FIBERGLASS (PHIFER) MESH, BLACK CHARCOAL COLOUR FOR ALUMINIUM & UPVC WINDOWS AND EXHAUST FANS FOR MOSQUITOES AT PLANT, TOWN SHIP AND JETTY AREAS SUPPLY OF ALUMINIUM WINDOW HANDLE OF 100 MM SUPPLY OF ALUMINIUM WINDOW HANDLE OF 75 MM SUPPLY & FIXING OF ALUMINIUM STAY FOR OPENABLE WINDOW SHUTTER SUPPLYING AND FIXING ALUMINIUM SLIDING WINDOW HANDLES SUPPLY & FIXING OF MAGNETIC LOCK FOR OPENABLE WINDOW SHUTTER. SUPPLYING AND FIXING ALUMINIUM SLIDING WINDOW WHEEL SUPPLYING AND FIXING ALUMINIUM DOORS AND WINDOWS BEEDINGS SUPPLY & FIXING OF WEATHER STRIP (BRUSH BEADING) 6 MM SUPPLY & FIXING OF WEATHER STRIP (BRUSH BEADING) 4 MM PROVIDING AND FIXING IN POSITION POWDER COATED ALUMINIUM WINDOWS AS PER APPROVED DRAWINGS WITH SLIDING SHUTTERS USING THREE TRACK WINDOW FRAME OF SIZE 92MMX31.75MM BOTTOM SECTION 1.3MM THICK, WEIGHT 1.07KG/M; SIDES AND TOP SECTIONS 1.3 MM THICK, WEIGHT 0.933 KG/M AND SHUTTER FRAME SECTION COMPRISING TOP AND BOTTOM SECTION OF SIZE 40MMX18MM, WALL THICKNESS 1.25MM. WEIGHT 0.417KG/M, SHUTTER OUTER SIDE 40MMX18MM WALL THICKNESS 1.25MM. WEIGHT 0.417 KG/M SHUTTER INTERLOCK SECTION 40MMX26.7MM WALL THICKNESS 1.1 MM THICK. WEIGHT 0.469KG/M. THE SHUTTERS MOUNTED ON NYLON ROLLERS WITH APPROVED QUALITY OF FIXTURES SUCH AS ALUMINIUM HANDLES, TOWER BOLTS ETC; PROVIDING AND FIXING 5 MM THICK PLAIN GLASS FOR 2 SHUTTERS AND ONE SHUTTER CONSISTING OF STAINLESS STEEL MESH WITH SQUARE OPENING (MOSQUITO MESH) FITTED WITH RUBBER BEADING AND GLAZING CLIPS, ALL ALUMINIUM SECTIONS POWDER COATED 60 TO 70 MICRONS INCLUDING CUTTING TO REQUIRED LENGTH, JOINTS MITRED SUBDIVIDING THE FRAME TENONNED AND RIVETTED, IN THE ASSEMBLED FRAME, STIFFENED WITH END CLIPS FOR CORNERS ANGLES ETC., AND FIXED TO THE WALLS, LINTELS, FLOOR BEAMS/SILLS AS THE CASE MAY BE WITH NECESSARY STEEL SCREWS, RAUL PLUGS OR TEAK WOOD GATTIES INCLUDING CUTTING MASONRY OR CONCRETE AND MAKING GOOD THE ORIGINAL SURFACE USING CEMENT MORTAR FOR BUILDINGS AT MRPL TOWNSHIP ALL COMPLETE AS PER DRAWINGS, SPECIFICATION AND AS PER THE INSTRUCTION AND DIRECTION OF EIC. SUPPLYING AND FIXING OF PLAIN GLASS 12MM IN THICK MAKE MODI GUARD/ASAI/SAINT GOBIAN, WITH RUBBER BEEDINGS, CLIPS FOR FIXING THE GLAS 5, TRANSPORTATION TO SITE INCLUDING DISMANTLING OF THE OLD ONE ETC ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS PROVIDING & FIXING TO EXISTING PARTITIONS 7.38MM LAMINATED GLASS WITH 2 NOS OF 3.5 MM FLOAT GLASS AND 0.38MM PVB LAMINATION IN BETWEEN(LE 3.5MM +0.38MM PVB 3.5MM) AS DIRECTED BY EIC SUPPLYING AND FIXING OF TOUGHENED GLASS 12 MM IN THICK MAKE MODI GUARD/ASAL SAINT GOBIAN, WITH RUBBER BEEDINGS, CLIPS FOR FIXING THE GLASS, TRANSPORTATION TO SITE ETC ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS SUPPLYING AND FIXING OF PLAIN GLASS 6MM IN THICK MAKE MODI GUARD/ASAI/SAINT GOBIAN, WITH RUHHER BEEDINGS, CLIPS FOR FIXING THE GLASS, TRANSPORTATION TO SITE INCLUDING DISMANTLING OF THE OLD ONE ETC ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS SUPPLYING AND FIXING OF PLAIN GLASS 5MM IN THICK MAKE MODI GUARD/ASAI/SAINT GOBIAN, WITH RUBBER BEEDINGS, CLIPS FOR FIXING THE GLASS, TRANSPORTATION TO SITE INCLUDING DISMANTLING OF THE OLD ONE ETC ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS SUPPLYING AND FIXING OF PLAIN GLASS 4MM IN THICK MAKE MODI GUARD ASAI/SAINT GOBIAN, WITH RUBBER BEEDINGS, CLIPS FOR FIXING THE GLASS, TRANSPORTATION TO SITE INCLUDING DISMANTLING OF THE OLD ONE ETC ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS SUPPLY & FIXING ETCHING GLASS 10 MM THICK FOR DOORS & WINDOWS SUPPLY & FIXING ETCHING GLASS 6 MM THICK FOR DOORS & WINDOWS SUPPLY & FIXING ETCHING GLASS 5 MM THICK FOR DOORS & WINDOWS SUPPLYING AND FIXING OF TOUGHENED GLASS 6 MM IN THICK MAKE MODI GUARD/ASAL/SAINT GOBIAN, WITH RUBBER BEEDINGS, CLIPS FOR FIXING THE GLASS, TRANSPORTATION TO SITE ETC ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS SUPPLYING AND FIXING OF SUN CONTROL FILM GAREWARE OR ANY APPROVED MAKE COLOUR BLACK/RETROLECTIVE, MANPOWER, MATERIALS, TOOLS, TACKLES ETC ALL COMPLETE AS DIRECTED BY EIC AT PHASE-3 WORKSHOP SUPPLY & FIXING OF 5 MM THICK TINTED GLASS SUPPLY & FIXING OF 4 MM THICK TINTED GLASS SUPPLY & FIXING OF 5 MM THICK SHUTTER PROOF GLASS PROVIDING AND FIXING METAL (GALVANIZED STEEL) TILE SUSPENDED CEILING SYSTEM (ARMSTRONG ORCAL TEGULAR PERFORATED SUPRAFINE OR APPROVED EQUIVALENT) CONSISTING OF (A) 600MM X 600MM X 15MM THICK GALVANIZED STEEL SMOOTH TEXTURE, BAKED POLYSTER PAINTED TILES WITH DURABLE TEGULAR EDGE HAVING NRC OF MIN 10.10, LIGHT REFLECTANCE VALUE OF MIN 0.61, WITH ACOUSTICAL FLEECE BACKUP, (B) SUSPENSION SYSTEM CONSISTING OF HOT DIPPED GALVANIZED STEEL MAIN TEE RUNNERS @ MAX. 1200MM C/C AND CROSS TEE RUNNERS TO BE INSTALLED TO CREATE A SPECIFIED NOMINAL OPENING FOR THE CEILING GRID WITH PERIMETER TRIM WIDE ANGLE, INCLUDING SUSPENDING THE SYSTEM BY MEANS OF MS WIRE, MS CLEAT, DASH FASTENERS AND LEVEL ADJUSTORS, PROVIDING 30 MOCRON POWDER COATING TO ALL EXPOSED METALLIC MEMBERS PROVIDING SLIT OPENINGS FOR FIXING HVAC DIFFUSERS, LUMINARIES, OTHER CEILING MOUNTED ASSEMBLIES ETC., ALL COMPLETE, PROVIDING & FIXING LEXALON UN-PREFORATED CORROSION RESISTENT ALUMINIUM ALLOY METAL PANEL CEILING SYSTEM OF APPROVED COTTON WHITE COLOUR CONSISTING OF PANEL 84MM WIDE X 12.5MM DEEP X 0.5MM THICK WITH SQUARE EDGES AND RECESS FLANGE OF 24MM,PANEL LENGTH UPTO 6MTRS, COIL COATED ON A CONTINUOUS PAINT LINE. DOUBLE BAKED AND ROLL FORMED FROM DOUBLED BAKED ENAMELLED CORROSION RESISTANCE ALUMINIUM ALLOY AA5050 / AA3105 FOR HIGHER STRENGTH AND GOOD ROLL FORMING CHARACTERISTICS. PANEL SHALL BE CLIPPED TO A BAKED ENAMELLED ALUMINIUM PANEL CARRIER OF 62MM WIDE X 29MM DEEP DOUBLE BAKED ENAMELLED ALUMINIUM ALLOY AA5050/AA3105 BLACK WITH CUT OUTS TO HOLD THE PANELS MODULE OF 100MM (WIDTH OF GAP 16MM CLOSED) AND AT THE DISTANCE 1.6MTRS.WITH INSULATION AND 1.8MTRS WITHOUT INSULATION. THE CARRIER SHALL BE SUSPENDED BY MEANS OF G.I SUSPENSION ROD 4MM DIAMETER AND GALVANISED SUSPENSION SPRING CLIP AT A DISTANCE UP TO 1.5MTRS C/C., LABOUR CHARGES FOR REMOVING & REFIXING OF LEXALON FALSE CEILING AS & WHEN REQUIRED WITH NECESSARY FASTENERS AND EXISTING MATERIALS, PROVIDING AND FIXING POP FALSE CEILING WITH 12MM THICK INDIA GYPSUM BOARD RECTANGULAR SHAPES OF SIZE 2’X4’ INCLUDING COST OF GI STRIPS FRAME WORK AND EXPANDABLE TYPE ANCHOR FASTENERS FOR FIXING THE POP SHEETS ETC INCLUDING MANPOWER TOOLS, TACKLES, MATERIALS, TRANSPORTATIONS TO SITE ETC ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS. PROVIDING AND FIXING GYPSUM BOARD 600X600 AND 15MM THICK GRID TYPE FALSE CEILING BY USING REQUIRED ALUMINIUM STRIPS OF ‘T’ SECTION 24MM WIDE WITH STEEL CLIPS ANCHORED WITH 10MM DIA ANCHOR BOLTS TO THE CEILING AND WALLS ETC ALL COMPLETE AS DIRECTED BY THE EIC AT PLANT, TOWN SHIP AND JETTY AREAS. PROVIDING AND FIXING OF 12.5 MM THICK SQUARE EDGE PVC LAMINATED GYPSUM TILE OF SIZE 595X595 MM, MADE OF GYPSUM PLASTERBOARD, MANUFACTURED FROM NATURAL GYPSUM AS PER IS 2095 PART I AND LAMINATED WITH WHITE 0.16MM THICK FIRE RETARDANT PVC FILM ON THE FACE SIDE AND 12MICRON METALIZED POLYESTER ON THE BACK SIDE WITH ALL EDGES SEALED WITH THE FACE SIDE PVC FILM WHICH GOES AROUND AND WRAPS THE EDGES AND IS BONDED TO THE EDGES AND THE BACK SIDE METALIZED POLYESTER FILM SO AS TO MAKE THE TILE A COMPLETELY SEALED UNIT IN TRUE HORIZONTAL LEVEL, SUSPENDED ON INTER LOCKING METAL GRID OF HOT DIPPED GALVANIZED STEEL SECTIONS ( GALVANIZED @ 120 GRAMS/ SQM, BOTH SIDE INCLUSIVE) CONSISTING OF MAIN T RUNNER WITH SUITABLY SPACED JOINTS TO GET REQUIRED LENGTH AND OF SIZE 24X38 MM MADE FROM 0.30 MM THICK (MINIMUM) SHEET, SPACED AT 1200 MM CENTER TO CENTER AND CROSS T OF SIZE 24X25 MM MADE OF 0.30 MM THICK (MINIMUM) SHEET, 1200 MM LONG SPACED BETWEEN MAIN T AT 600 MM CENTER TO CENTER TO FORM A GRID OF 1200X600 MM AND SECONDARY CROSS T OF LENGTH 600 MM AND SIZE 24X25 MM MADE OF 0.30 MM THICK (MINIMUM) SHEET TO BE INTERLOCKED AT MIDDLE OF THE 1200X600 MM PANEL TO FORM GRIDS OF 600X600 MM AND WALL ANGLE OF SIZE 24X24X0.3 MM AND LAYING FALSE CEILING TILES OF APPROVED TEXTURE IN THE GRID INCLUDING, REQUIRED CUTTING/MAKING, OPENING FOR SERVICES LIKE DIFFUSERS, GRILLS, LIGHT FITTINGS, FIXTURES, SMOKE DETECTORS ETC. MAIN T RUNNERS TO BE SUSPENDED FROM CEILING USING GI SLOTTED CLEATS OF SIZE 27 X 37 X 25 X1.6 MM FIXED TO CEILING WITH 12.5 MM DIA AND 50 MM LONG DASH FASTENERS, 4 MM GI ADJUSTABLE RODS WITH GALVANISED BUTTERFLY LEVEL CLIPS OF SIZE 85 X 30 X 0.8 MM SPACED AT 1200 MM CENTER TO CENTER ALONG MAIN T, BOTTOM EXPOSED WIDTH OF 24 MM OF ALL T-SECTIONS SHALL BE PRE-PAINTED WITH POLYESTER PAINT, ALL COMPLETE FOR ALL HEIGHTS AS PER SPECIFICATIONS, DRAWINGS AND AS DIRECTED BY ENGINEER-IN-CHARGE. PROVIDING AND FIXING 15 MM THICK DENSIFIED TEGULAR EDGED ECO FRIENDLY LIGHT WEIGHT CALCIUM SILICATE FALSE CEILING TILES OF APPROVED TEXTURE OF SIZE 595 X 595 MM IN TRUE HORIZONTAL LEVEL, SUSPENDED ON INTER LOCKING METAL GRID OF HOT DIPPED GALVANISED STEEL SECTIONS (GALVANISING @ 120 GRAMS PER SQM INCLUDING BOTH SIDE) CONSISTING OF MAIN ‘T’ RUNNER SUITABLY SPACED AT JOINTS TO GET REQUIRED LENGTH AND OF SIZE 24X38 MM MADE FROM 0.33 MM THICK (MINIMUM) SHEET, SPACED 1200 MM CENTRE TO CENTRE, AND CROSS “T” OF SIZE 24X28 MM MADE OUT OF 0.33 MM (MINIMUM) SHEET, 1200 MM LONG SPACED BETWEEN MAIN’T’ AT 600 MM CENTRE TO CENTRE TO FORM A GRID OF 1200X600 MM AND SECONDARY CROSS ‘T’ OF LENGTH 600 MM AND SIZE 24 X28 MM MADE OF 0.33 MM THICK (MINIMUM) SHEET TO BE INTER LOCKED AT MIDDLE OF THE 1200X 600 MM PANEL TO FROM GRID OF SIZE 600X600 MM, RESTING ON PERIPHERY WALLS /PARTITIONS ON A PERIMETER WALL ANGLE PRE-COATED STEEL OF SIZE(24X24X3000 MM MADE OF 0.40 MM THICK (MINIMUM) SHEET WITH THE HELP OF RAWL PLUGS AT 450 MM CENTRE TO CENTRE WITH 25 MM LONG DRY WALL SCREWS @ 230 MM INTERVAL AND LAYING 15 MM THICK DENSIFIED EDGES CALICUM SILICATE CEILING TILES OF APPROVED TEXTURE IN THE GRID, INCLUDING, CUTTING/ MAKING OPENING FOR SERVICES LIKE DIFFUSERS, GRILLS, LIGHT FITTINGS, FIXTURES, SMOKE DETECTORS ETC., WHEREVER REQUIRED. MAIN ‘T’ RUNNERS TO BE SUSPENDED FROM CEILING USING G.I. SLOTTED CLEATS OF SIZE 25X35X1.6 MM FIXED TO CEILING WITH 12.5 MM DIA AND 50 MM LONG DASH FASTENERS, 4 MM G.I. ADJUSTABLE RODS WITH GALVANISED STEEL LEVEL CLIPS OF SIZE 85 X 30 X 0.8 MM, SPACED AT 1200 MM CENTRE TO CENTRE ALONG MAIN ‘T’, BOTTOM EXPOSED WITH 24 MM OF ALL TSECTIONS SHALL BE PRE-PAINTED WITH POLYSTER BAKED PAINT, FOR ALL HEIGHTS, AS PER SPECIFICATIONS, DRAWINGS AND AS DIRECTED BY ENGINEER-IN-CHARGE. PROVIDING AND FIXING 15 MM THICK MINERAL FIBRE FALSE CEILING TILES AT ALL HEIGHTS OF SIZE 595X595MM OF APPROVED TEXTURE, DESIGN AND PATTERN. THE TILES SHOULD HAVE NRC (NOISE REDUCTION COEFFICIENT) OF 0.50 (MINIMUM) AS PER IS 8225:1987, LIGHT REFLECTANCE OF 85% (MINIMUM), THERMAL CONDUCTIVITY K = 0.052 - 0.057 W/M K, FIRE PERFORMANCE AS PER (BS 476 PT - 6 &7)IN TRUE HORIZONTAL LEVEL SUSPENDED ON INTERLOCKING TGRID OF HOT DIPPED ALL ROUND GALVANIZED IRON SECTION OF 0.33 MM THICK (GALVANIZED @120 GSM) COMPRISING OF MAIN T RUNNERS OF 15X32 MM OF LENGTH 3000 MM, CROSS T OF SIZE 15X32MM OF LENGTH 1200 MM AND SECONDARY INTERMEDIATE CROSS T OF SIZE 15X32 MM OF LENGTH 600 MM TO FORM GRID MODULE OF SIZE 600X600 MM SUSPENDED FROM CEILING USING GALVANIZED MILD STEEL ITEM (GALVANISED@80GSM) 50 MM LONG 8MM OUTER DIAMETER M-6 DASH FASTENERS, 6 MM DIAMETER FULLY THREADED HANGER ROD UP TO 1000 MM LENGTH AND LSHAPE LEVEL ADJUSTER OF SIZE 85X25X2 MM, SPACED AT 1200 MM CENTRE TO CENTRE ALONG MAIN ‘T’. THE SYSTEM SHOULD REST ON PERIPHERY WALLS /PARTITIONS WITH THE HELP OF GI PERIMETER WALL ANGLE OF SIZE24X24X3000 MM MADE OF 0.40 MM THICK SHEET, TO BE FIXED TO THE WALL WITH HELP OF PLASTIC RAWL PLUG AT 450 MM CENTRE TO CENTRE & 40 MM LONG DRY WALL S.S. SCREWS. THE EXPOSED BOTTOM PORTION OF ALL T-SECTIONS USED IN FALSE CEILING SUPPORT SYSTEM SHALL BE PRE-PAINTED WITH POLYESTER BAKED PAINT, FOR ALL HEIGHTS. THE WORK SHALL BE CARRIED OUT AS PER SPECIFICATIONS, DRAWINGS AND AS PER DIRECTIONS OF THE ENGINEERIN-CHARGE. NOTE: APPROVED BRAND- ARMSTRONG/AMF REPAIRING OF FALSE FLOORING AT VARIOUS LOCATION INCLUDING BOTTOM SUPPORTS AND FRAMES BY REPLACING 2MM THICK ANTISTATIC VINYL SHEETS, INCLUDING REPAIRING SUPPORTS, HARDBOARDS WITH AVAILABLE MATERIALS, INCLUDING COST OF VINYL SHEETS ADHESIVES, MANPOWER, TOOLS TACKLES, ETC ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS. PROVIDING AND FIXING OF 1.5 MM THICK (BIRLA VINOLEUM/WONDER FLOOR/LG FLOOR) VINYL FLOORING AT VARIOUS LOCATION INCLUDING REQUIRED VINYL SHEETS ADHESIVES OVER EXISTING PREPARED SURFACE, COST OF MATERIALS, MANPOWER, TOOLS TACKLES, ETC ALL COMPLETE AS DIRECTED BY EIC AT PLANT, TOWN SHIP AND JETTY AREAS. REPLACING 2MM ANTISTATIC VINYL SHEETS (APPROVED MAKE- LG, WONDERFLOOR) INCLUDING REMOVAL OF THE OLD ONE AND FIXING THE NEW ONES USING GUM ALL COMPLETE AS PER THE DIRECTIONS OF EIC. PROVIDING AND FIXING IMPORTED VINYL BACKED WALL PAPER OF APPROVED TEXTURE, DESIGN AND PATTERN OVER EXISTING POP PUNNED MASONRY WALLS/ LAMINATE/GYPSUM/MDF/PLYWOOD SURFACE. THE WALL PAPER SHOULD BE FINISHED USING PROPRIETARY MAKE JOINTING COMPOUND, TWO COATS OF UNDER COATS, PRIMER COAT, FULL PATTY, LAMBI, SANDED AND SMOOTH WAVE FREE FINISHED SURFACE TO THE SATISFACTION OF THE EIC. APPROVED BRAND- MAYARAMANOFF/ARTE/MURASPEDURAFORT/MURASPEC PROVIDING AND FIXING PAPER BACKED WALL PAPER OF APPROVED TEXTURE, DESIGN AND PATTERN OVER EXISTING POP PUNNED MASONRY WALLS/LAMINATE GYPSUM/MDF/PLYWOOD SURFACE, THE WALL PAPER SHOULD BE FINISHED USING PROPRIETARY MAKE JOINTING COMPOUND, TWO COATS OF UNDER COATS, PRIMER COAT FULL PATTY, LAMBI, SANDED AND SMOOTH WAVE FREE FINISHED SURFACE TO THE SATISFACTION OF THE EIC PROVIDING AND FIXING FABRIC BACKED WALL PAPER OF APPROVED TEXTURE, DESIGN AND PATTERN OVER EXISTING POP PUNNED MASONRY WALLS/LAMINATE/ GYPSUM/MDF/PLYWOOD SURFACE THE WALL PAPER SHOULD BE FINISHED USING PROPRIETARY MAKE JOINTING COMPOUND, TWO COATS OF UNDER COATS, PRIMER COAT, FULL PATTY, LAMBI, SANDED AND SMOOTH WAVE FREE FINISHED SURFACE TO THE SATISFACTION OF THE EIC PROVIDING AND FIXING NON-WOVEN BACKED WALL PAPER OF APPROVED TEXTURE, DESIGN AND PATTERN OVER EXISTING POP PUNNED MASONRY WALLS/ LAMINATE/GYPSUM/MDF/PLYWOOD SURFACE. THE WALL PAPER SHOULD BE FINISHED USING PROPRIETARY MAKE JOINTING COMPOUND, TWO COATS OF UNDER COATS, PRIMER COAT, FULL PATTY, LAMBI, SANDED AND SMOOTH WAVE FREE FINISHED SURFACE TO THE SATISFACTION OF THE EIC. REMOVAL OF OLD WALLPAPER INCLUDING REMOVAL OF THE ADHESIVE MATERIAL FULLY AS DIRECTED BY EIC CHARGES FOR ALUMINIUM COMPOSITE PANEL OF 4MM THICK FIXING TO ALUMINIUM FRAME AS REQUIRED INCLUDING ALL MATERIALS AND LABOUR CHARGES SUPPLYING & FIXING OF 4MM THICK ALUMINIUM COMPOSITE PANNELS OF EXTERNAL GRADE AFTER REMOVING OF EXISTING SHEETS FIXING TO EXISTING ALUMNIUM FRAME WORK INCLUDING ALL NECESSARY FASTNERS, SCREWS, CLAMPS, & FILLING THE GROOVES USING WEATHER PROOF SILICON SEALENTS OF DOWCORNING OR EQUIVALENT MAKE AT HORIZONTAL & VERTICAL DIRECTION INCLUDING ALL LABOUR CHARGES COMPLETE. SUPPLY & APPLICATION OF SILICON WEATHER SEALENT NEARLY 12MM WIDTH INCLUDING ALL MATERIALS AND LABOUR CHARGES AS PER THE DIRECTIONS OF EIC. SUPPLY AND FIXING OF UPVC SLIDING WINDOWS TOUCH LOCK INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC SUPPLY AND FIXING OF UPVC SLIDING WINDOWS TOUCH LOCK KEEPS INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC. SUPPLY AND FIXING OF UPVC OPENABLE WINDOW HANDLES INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC. SUPPLY AND FIXING OF UPVC OPENABLE WINDOW LOCKING GEAR INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC. SUPPLY AND FIXING OF UPVC OPENABLE WINDOW BUTT HINGES INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC. SUPPLY AND FIXING OF UPVC OPENABLE WINDOW SS FRICTION STAY INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF FIC SUPPLY AND FIXING OF UPVC OPENABLE WINDOW LOCKING KEEPS INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC SUPPLY AND FIXING OF MORTICE DOOR LOCK FOR UPVC DOORS INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC SUPPLY AND FIXING OF CYLINDRICAL DOOR LOCK FOR UPVC DOORS INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC. SUPPLY AND FIXING OF UPVC DOOR HINGES INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC. SUPPLY AND FIXING OF UPVC DOOR LOCKING DRIVE CHANNEL INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC. SUPPLY AND FIXING OF UPVC GLASS GASKETS INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC SUPPLY AND FIXING OF UPVC SHUTTER WOOL FELT INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC SUPPLYING & FIXING OF UPVC SLIDING SHUTTERS OF IN EXISTING FRAME AS PER SITE CONDITIONS WITH UPVC SASH & GLAZING DIPS INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE, FIXING ALL THE NECEASSARY UPVC FIXTURES SUCH AS TOUCH LOCK, WHEELS, TPV GASKETS ALL COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC PROVIDING & FIXING OF UPVC 2TRACK/2SHUTTER SLIDING WINDOWS CORRESPONDING TO THE OUTER FRAME SIZE USING WITH 5MM CLEAR GLASSINCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE, FIXING ALL THE NECESSARY UPVC FIXTURES SUCH AS TOUCH LOCK, WHEELS, TPV GASKETS ALL COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC PROVIDING & FIXING OF UPVC WINDOWS OUTER FRAME OF SIZE 45X60X45MM WITH WALL THICKNESS OF 1.8MM(+/-0.3MM) INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE, FIXING ALL THE NECEASSARY UPVC FIXTURES SUCH AS TOUCH LOCK KEEPS, APPLYING SILICON BASED SEALANTS ALL COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC PROVIDING & FIXING OF UPVC OPEANBLE CASEMENT WINDOWS USING 60 SERIES, UPVC PROFILES, SMM CLEAR GLASS, FRICTION STAY, OPENABLE HANDLES, BOTH SIDES INCLUDING DISMANTLING OR REMOVAL OF THE OLD ONE COMPLETE REQUIRED TO PERFORM THE JOB AS PER SITE CONDITIONS AND DIRECTIONS OF EIC SUPPLY OF ARMSTRONG ANF MICRO LOOK CEILING TILE ( 600*600*15MM), CODE NO. W8678, INCLUDING TRANSPORTATION ALL COMPLETE AS PER DIRECTIONS OF EIC SUPPLY OF FABRICATOR FOR REPAIR & SERVICING OF UPVC & ALUMINIUM DOOR & WINDOWS WORK SUPPLY OF HELPER FOR REPAIR & SERVICING OF UPVC & ALUMINIUM DOOR & WINDOWS WORK PROVIDING AND FIXING 6 MM THICK DENSIFIED TEGULAR EDGED ECO FRIENDLY LIGHT WEIGHT CALCIUM SILICATE FALSE CEILING TILES OF APPROVED TEXTURE OF SIZE 595 X 595 MM IN TRUE HORIZONTAL LEVEL, SUSPENDED ON INTER LOCKING METAL GRID OF HOT DIPPED GALVANISED STEEL SECTIONS (GALVANISING @ 120 GRAMS PER SQM INCLUDING BOTH SIDE) CONSISTING OF MAIN ‘T’ RUNNER SUITABLY SPACED AT JOINTS TO GET REQUIRED LENGTH AND OF SIZE 24X38 MM MADE FROM 0.33 MM THICK (MINIMUM) SHEET, SPACED 1200 MM CENTRE TO CENTRE, AND CROSS T OF SIZE 24X28 MM MADE OUT OF 0.33 MM (MINIMUM) SHEET, 1200 MM LONG SPACED BETWEEN MAIN’T’ AT 600 MM CENTRE TO CENTRE TO FORM A GRID OF 1200X600 MM AND SECONDARY CROSS ‘T’ OF LENGTH 600 MM AND SIZE 24 X28 MM MADE OF 0.33 MM THICK (MINIMUM) SHEET TO BE INTER LOCKED AT MIDDLE OF THE 1200X 600 MM PANEL TO FROM GRID OF SIZE 600X600 MM, RESTING ON PERIPHERY WALLS /PARTITIONS ON A PERIMETER WALL ANGLE PRE-COATED STEEL OF SIZE(24X24X3000 MM MADE OF 0.40 MM THICK (MINIMUM) SHEET WITH THE HELP OF RAWL PLUGS AT 450 MM CENTRE TO CENTRE WITH 25 MM LONG DRY WALL SCREWS @ 230 MM INTERVAL AND LAYING 15 MM THICK DENSIFIED EDGES CALICUM SILICATE CEILING TILES OF APPROVED TEXTURE IN THE GRID, INCLUDING, CUTTING/ MAKING OPENING FOR SERVICES LIKE DIFFUSERS, GRILLS, LIGHT FITTINGS, FIXTURES, SMOKE DETECTORS ETC., WHEREVER REQUIRED. MAIN ‘T’ RUNNERS TO BE SUSPENDED FROM CEILING USING G.I. SLOTTED CLEATS OF SIZE 25X35X1.6 MM FIXED TO CEILING WITH 12.5 MM DIA AND 50 MM LONG DASH FASTENERS, 4 MM G.I. ADJUSTABLE RODS WITH GALVANISED STEEL LEVEL CLIPS OF SIZE 85 X 30 X 0.8 MM, SPACED AT 1200 MM CENTRE TO CENTRE ALONG MAIN ‘T’, BOTTOM EXPOSED WITH 24 MM OF ALL TSECTIONS SHALL BE PRE-PAINTED WITH POLYSTER BAKED PAINT, FOR ALL HEIGHTS, AS PER SPECIFICATIONS, DRAWINGS AND AS DIRECTED BY ENGINEER-IN-CHARGE. PROVIDING AND FIXING 8 MM THICK DENSIFIED TEGULAR EDGED ECO FRIENDLY LIGHT WEIGHT CALCIUM SILICATE FALSE CEILING TILES OF APPROVED TEXTURE OF SIZE 595 X 595 MM IN TRUE HORIZONTAL LEVEL, SUSPENDED ON INTER LOCKING METAL GRID OF HOT DIPPED GALVANISED STEEL SECTIONS (GALVANISING @ 120 GRAMS PER SQM INCLUDING BOTH SIDE) CONSISTING OF MAIN ‘T’ RUNNER SUITABLY SPACED AT JOINTS TO GET REQUIRED LENGTH AND OF SIZE 24X38 MM MADE FROM 0.33 MM THICK (MINIMUM) SHEET, SPACED 1200 MM CENTRE TO CENTRE, AND CROSS T OF SIZE 24X28 MM MADE OUT OF 0.33 MM (MINIMUM) SHEET, 1200 MM LONG SPACED BETWEEN MAIN’T’ AT 600 MM CENTRE TO CENTRE TO FORM A GRID OF 1200X600 MM AND SECONDARY CROSS ‘T’ OF LENGTH 600 MM AND SIZE 24 X28 MM MADE OF 0.33 MM THICK (MINIMUM) SHEET TO BE INTER LOCKED AT MIDDLE OF THE 1200X 600 MM PANEL TO FROM GRID OF SIZE 600X600 MM, RESTING ON PERIPHERY WALLS /PARTITIONS ON A PERIMETER WALL ANGLE PRE-COATED STEEL OF SIZE(24X24X3000 MM MADE OF 0.40 MM THICK (MINIMUM) SHEET WITH THE HELP OF RAWL PLUGS AT 450 MM CENTRE TO CENTRE WITH 25 MM LONG DRY WALL SCREWS @ 230 MM INTERVAL AND LAYING 15 MM THICK DENSIFIED EDGES CALICUM SILICATE CEILING TILES OF APPROVED TEXTURE IN THE GRID, INCLUDING, CUTTING/ MAKING OPENING FOR SERVICES LIKE DIFFUSERS, GRILLS, LIGHT FITTINGS, FIXTURES, SMOKE DETECTORS ETC., WHEREVER REQUIRED. MAIN ‘T’ RUNNERS TO BE SUSPENDED FROM CEILING USING G.I. SLOTTED CLEATS OF SIZE 25X35X1.6 MM FIXED TO CEILING WITH 12.5 MM DIA AND 50 MM LONG DASH FASTENERS, 4 MM G.I. ADJUSTABLE RODS WITH GALVANISED STEEL LEVEL CLIPS OF SIZE 85 X 30 X 0.8 MM, SPACED AT 1200 MM CENTRE TO CENTRE ALONG MAIN ‘T’, BOTTOM EXPOSED WITH 24 MM OF ALL TSECTIONS SHALL BE PRE-PAINTED WITH POLYSTER BAKED PAINT, FOR ALL HEIGHTS, AS PER SPECIFICATIONS, DRAWINGS AND AS DIRECTED BY ENGINEER-IN-CHARGE. Total Quantity :
