Tender For Beautification Work Of The Pond Located In The Ancient Bhuteshwar Mahadev Temple., 1 Cleaning Jungle Including Uprooting Of Vegetation Grass, Bush, Wood, Trees And Sapling Of Girth Up To 30 Cm. Measured Ata Height Of 1.00 M Above Groung Level, bulandshahr-Uttar Pradesh

tender for Beautification work of the pond located in the ancient Bhuteshwar Mahadev temple., 1 Cleaning jungle including uprooting of vegetation grass, bush, wood, trees and sapling of girth up to 30 cm. Measured ata height of 1.00 m above groung level & removal of rubbish upto a distance of 50.00 m outside the periphery of area. 2 Excavation work in foul condition of Soil including, lift upto 1.50 Mand lead Upto 30m 3 Cartage forDisposal of all malba surpluse earth etc uoto 5.00 Km 4 Earth work in filling with ordanry soil including lead up to 30 mtr and lift up to 1.5 mtr, including extra cartage up to 8.00 5 Providing and laying cement concrete in 1:6:12 (lcement : 6 Fine sand: 12 Brick Ballast 40mm gauge. 6 First class R/w in l :4 Cement Csand mortor inSub Structure lncludine supply of all meterlal labour t&P etc required for proper completion of workNear Temple Back Side GateAndEdging for Stone laying 7 12 mm thick Plaster with cement& course Sand of 1.25 FM Mortar in 1:4 8 Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work In foundation and floors-completion of the work as per direction of the E / I. 9 Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mmto 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 {1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely srounded hydrated lime by volume of cement.Ordinary cement finish 10 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. 11 Extra for pre finished nosing in treads of steps of Kata stone/ sand stone slab. 12 Supply and Laying Grassing with Doobs grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. In rows 7.5 cm apart in either direction 13 supply, boring and fixing 1.50 HP single phase submarcible pump including boring, 110mm dia PVC Stainer and Plaine Pipe 6kg/socrn Tirupati make !SI Mark, 32mm dia GI Pipe B-Class Jindal Make ISI Mark, Filter Colth,Glowing of 1.5 HP Single Phase Motor Pump Set ISI Mark Aroma/Rockwell Make, Copper Cable 3 core 2.5mrn2 Kent/Finolex Make ISI Mark,Aiuminium Cable 2 core 10mm 2 Kent/Finolex Make ISI Mark, Panel with overload relay and single phase protection IS! Mark Haveles/Bentex Make, 32mm dia MS Clamp,1.25 Elbow etc. all T&P, Iabour,material, all connections and wiring as per atteched specifications and as per directed Engineer in charge. 14 Supply and Fixing inoguration black granite stonepadestalincludini;grooving matter brickwork,plaster,paintingetc. cornplete. 15 Providing wall putty on old surface with approved quality material of Berger /J.K./ Birla or similar make 2 coats over plastered surface to prepare the surface even and smooth complete. 16 Providing of wall painting with make picture and slogan and writing making base of all work complete.50% area of total Qty 17 Providing of 3D wall painting with picture including of making base of all work complete. 50% area of total Qty 18 Supply & Fixing Garden Bench (Victoria Type Bench)•Cast Iron having back height of 720 mm and seating height of 390 mm.•M.5 Tube of 65mm X 25mm rectangular tube having length of 1520 mm in 10 Nos.• For seating purpose with extra support 25mm X 5mm M.S. Flat for extrastability all sharp and rough edge of Bench are to be grinded with grinder and all fill up with m seal where its required necessary thus bench ishaving the provision of hole past system (for grouting).• Bench in complete with a coating of 1st class red oxide and with two coats of synthetic enamel of 1st class quality paint in green colour.•Finally bench is assembled with nuts and bolts.•Gross weight of each bench is 70 kg. 19 Supply and Fixing Mild steel decorative pole 6 mtr 230/41SV Dual arm with cool white /white/warm white lighting color including 6mm thick foundation plate and 20mm foundation bolt 20 Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting offuorescent! HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the fiat iron with primer and finish paint etc. as required.Street Light 21 2.1 High Mask Light S/F 16 mtr. LED High Mast System 22 2.2 Part-A S/F of 01 nos mast shaft shall be in two sections, hot dip galvanised, inside and outside in single dip, suitable for wind velocity as per IS 875 part 3. there shall be only one longitudinal seam weld per section and cirumferental. And Supply of 01 set foundation bolts manufatured from special steel along with nuts, And Supply of 02 COW LED flood light OS nos make GE/ Trilux/Disano/ Goldwyn /Bajaj/ Philips/Wipro approved by E/1. (with guarantee of replacement three years of LED fitting including driver complete)And Supply of 01 nos twi dome LED aviationobstruction lights And Supply of 01nos control panel housing suitable control circuit for automatic switching ON and OFF 2 of the mast. it shall also have suitable controls of operation of power tool approved by E/IPart-B Construction of 01 nos suitable shallow foundation with M20 concrete for the high mast considering the safe soil bearing capacity at site as 10 T/sqmtr at depth with all materials & labour. And Erection of 01 nos Hight Mast with the help of suitable equipments and the wiring of luminaries with all wiring material & labour. And Providing of 02 nos GI pipe earthing for high mast with 2.5m long 40mm dia 6.1. pipe including connection of high mast earth terminal with 25x3mm GI flats with all wiring material & labour And Installation of control panel on suitable foundation including all material & labourAnd Trenchless horizontal boring with more than 2 mtr & upto 6 mtr below ground level with 90mm HOPE pipe (PE-80, PN-6 grade 1S1 mark) by machine technology including cost of HDEP pipe T&P, labour and all required suitable for laying LT 1100 V cable upto 95 sqmm size with proper completion of work as pr direction of E/I. 23 GST 24 DPR Charg 2%

INR 5900 /-

INR 500000.0 /-

Refer document