Tender For Supply Of Items-, Pune-Maharashtra

Tender For Supply Of Items- SECTION A: R.C.C. WORKS P.C.C below Footing /ground work of 1:2:4 Grade concrete. All R.C.C. works to be constructed out of M25 designed mix concrete fabricated out of crushed stone aggregates, crushed stone sand & P.P.C. in proportions as directed, mixed in approved mechanical batch mixer. Rate includes mixing transporting, lifting. placing finishing, consolidation by needle vibrators, finishing to required size & shape, curing de-shuttering hacking concrete surface as directed etc complete but excludes reinforcement which is measured separately. M 25 Footing M 25 Columns below plinth and GF M 25 Floor slabs (100 to 150 mm thk) a) New floor Onward M 25 Floor beams, horizontal & sloping a) Plinth bean and slab beam M 25 Lintels/Sill beams (at all levels) M 25 chajjas up to 100mm thick Formwork for RCC footing Formwork for RCC Columns Formwork for RCC Beams Formwork for RCC Slab Formwork for RCC Lintels Formwork for RCC chajja Providing & Laying in position Tor steel reinforcement as per structural consultants drawings, including bending, placing, binding with 16 G Annealed steel binding wire, providing cover blocks, dowels, chairs, spacers, including laying thin plastic below the reinforcement, oiling, rolling margin & wastages etc complete to the entire satisfaction to the Architect/ Consultant (Wt shall be measured as per standard structure table) Material and Labour for AAC block masonry 200mm thk jointed with chemical and finished as directed. Providing internal plaster 10mm thick on masonry and concrete surfaces finished with thin layer of sagol as directed Providing Extermal plaster 15mm thik on masonry and concrete surfaces finished: us directed M/L for 2x2 Vitrified floor tiles with cement screed 12 to 15 mm thick in CM 1:6 M/L for 2x2 Vitrified tiles in skirting 75 30.100 mm high with neat coment MIL for Electrical works & fittings M&L Preparing newly plastered surfaces of walls and apply two coats of oll emulsion paint complete M&L Prepanng newly plastered surfaces of ceiling walls and apply two coats of oil emulsion paint complete Preparation of newly plastered surface and applying two coats coat of exterior weather coat paint with one coat of primer on walls complete all as specified and directed 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed S&F Mild steel work for hoid fast S&F 35mm thick flush shutters, solid core construction with black board core and plywood face panels commercial type on one face and other side covered with decorative face veneer with liping/frame to match complete all as specified. B&F, 1mm thick wood grain printed PVC sheet fixed or laid on to flush doors by using rubber used adhesive, supplying & fixing at site as per specification M& Lanodised aluminium powder coated sliding windows(four track/free track) with anodised aluminium shutters of both glazed and gauzed with 5.5mm thick tinted glass, stainless steel wire cloth netting(0.36mm nominal dia and average width of aperture 1.40mm). aluminium grills (Decogrill-DG-916) and fixed including necessary glazing clipe rubber packing, anodized aluminum snap beading screws and aluminium fittings of standard size complete all es specified and directed. cement sand steel

INR 1000 /-

INR 40000.0 /-

Refer document