Tender For Certain Comprehensive Repairs To B/R Items Of Mes Area And Key Personal Area Under Ge(S) Binnaguri.-Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and directed. 2 All as item No 1 here-in before but n.exc 1.5 Sqm each complete all as specified and directed. 3 Taking down shutters and refixing in same openingof any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. 4 Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and directed. 5 Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 6 Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. 7 Dismantling wrought iron or mild steel work of any description not otherwiseprovided for grils.rails etc complete all as specified and directed. 8 Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins complete all as specified and directed. 9 Demolition of precast concrete block/brick wallingbuilt in cement mortarof any description etc complete all as specified. 10 Dismantling of cement concrete of any size, position and any description complete all as specified and as directed. 11 Dismantling old PGI/CGI sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and directed. 12 Taking town of steel windows/ventilators of any size anddescriptionand removal from site complete all as specified and directed. 13 M& L vetrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match complete over 15mm thick screed bed in CM(1:6) all as specifierd and as directed. 14 All as per item no 13 but as in skirting 10 cm height complete all as specified and directed. 15 S&F of factory made steel windows with side hung shutters openable type including friction/projected typehinges steel handle and peg stay complete withoutglazing bars fixed to existiog opening and making to match as per existing surfaces complete all as specified and directed. 16 S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows. 17 M&L for joint freenon-skid ceramic tiles any selectedcolour(600x600x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed. 18 All as item No 17 here-in before buton vertical surfaces but on 10mm thick rendering in CM (1:4) complete.(Size =600x100mm) 19 M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed. 20 M&L for glazed colouredceramic tiles (450x350x7mm thick)on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed. 21 M & L for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4)including rounded the exposed surfaces of granite complete all as specified. 22 All as per item no 21 butas in skirting ( 12 to 15 mm thick) but on 10 mm tkick rendering/ back coating in CM (1:4) complete all as specified and as directed. 23 M&L for pre-painted galvalume aluminium zinc coating GI based Corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks as specified. 24 M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks as specified. 25 M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters;verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. 26 M&L for MS flat iron bent to shape, holes drilled etc complete as inwind ties etc including one coat of red oxide paint complete all as specified and directed. 27 M&L forMS plate of any size & thickness, holes drilledor without drilled etcc including one coat of red oxide paint complete all as specified and as directed. 28 M&Lfor 75 mm thickcement concrete 1:3:6type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and incl use and waste of form workand finishing the surface even and rough to receivethe topping layer ortiling complete all as specified and directed . 29 M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even androughto receive floor finishes complete all as specified and directed. 30 M & L for providing plain cementconcrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. 31 M&L for Plain Cement concrete (1:4:8) type D2 (Using 40 mm graded stone agg)in foundations,filling and mass concrete complete all as specifide as directed. 32 M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. 33 S&Fof 3mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and directed. 34 All as per item No.33 here-in- above but 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete all as specified and directed. 35 Supply and fixing aluminium anodised snap grid false ceiling to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including hanging proper hanging arrangement with 4 mm dia anodized galvanised iron wire and adjuster complete as specified. 36 S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as dirceted. 37 S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm 38 S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm 39 M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed. 40 S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) suppliedand fitted to chowkats. 41 M & L for fabrication and fixing of anodised powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2 mm and section of bottom and top rail iof section 114 mm x 44.45 mm x 2mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ forsted float glass, and with anodised aluminum snap beading of size 18.20 mm x 16.66 mm scred for fixing fully including all neceassaryfittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 no heavy duty door shutter 1 o 200 mm long aluminium tower bolt and 3nos 125 mm long stainless steel butt hinges per shutter including taking down old one complete all as specified and as directed. 42 S&F Powder coatedaluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. 43 S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed. 44 M & for water proofing treatment to sunken floor with the following course of treatment/ specification:(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrers instruction laid in slope 1:20 towards spouts including coveting corners(ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturers instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation .(Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant approved brand.Make of PU paint - Dek guard PUor equivalant approved brand. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water.(vii)Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate 45 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed. 46 S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed. 47 S&F ofstainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doorscomplete all as specified and directed. 48 S&F ofin repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doorscomplete all as specified and directed. 49 S&F Framed work such as grills,gratings, etcwith ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 50 M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete. 51 M&L for brick work with sub class B bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed. 52 M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair complete all as specified and directed. 53 Material and labour rendering 20mm thick cement plaster in CM 1:4 onfair faces of brick/concrete work surfaces in two layer 10mm each layer and top layer mixed with integral water proofing compound all as per manufacturers instruction and as specified.Make: Plastocrete Plus of Sika/ Pidiproof LW of Pidilite for water proofing compound.Note: (i) WPC shall be measured and paid for separately as Supply only.(ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction. 54 M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and directed. 55 Supply only liquid water proofing compound complete all as specified and directed. 56 M& l for two coat of Acrylic distember on new wall surface including preperation of the surface all as directed and specified. 57 M&L for applying 1 mm thick (average thickness) wall care putty on new or old wall surface all as directed and specified complete. 58 M&L applying two coats of Exterior acrylic emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed. 59 Taking up or downsteel water tubings and fittings etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified and as directedof following bore:- (a)Bore tubing 15mm 60 Ditto as per Item No 59 but for Bore tubing 20mm 61 M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for Bore tubing 15mm 62 all as per item No 61 but for Bore tubing 20mm complete all as specified and as directed. 63 Refixing of reusable GI pipes of 15mm boreafter necessary cleaning and renewal of GI fittings as required all as specified.Note: (i) GI tubing retrieved against relevant item shall be reused.(ii) New GI fittings required shall be supplied by the contractor and the quoted rate shall be deemed to be inclusive of the cost of the same. 64 Refixing of reusable GI pipes of 20mm boreafter necessary cleaning and renewal of GI fittings as required all as specified.Note: (i) GI tubing retrieved against relevant item shall be reused.(ii) New GI fittings required shall be supplied by the contractor and the quoted rate shall be deemed to be inclusive of the cost of the same. 65 S&F in repair 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete. 66 S&F250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete. 67 M&L for 150 mm size aluminium anodised cast type handles complete all as specified and as directed. 68 M&L in repair 150 mm size aluminium anodised cast type handles complete all as specified and as directed. 69 S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and as directed. 70 S&F100mm size mild steel butt hinges medium weight complete all as specified and as directed. 71 S&F100mm size stainless steel butt hinges medium weight complete all as specified and as directed. 72 S&F in repairs ofPVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle,bracket, longflush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC (Make : Sleek of Hindware, Slimline of Parryware or equivalent of Cera) complete all as specified and as directed. 73 S&F in repairWater Closet (squatt pattern) of vitruous china squatting pan of pattern ORRISA pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed. 74 S&F in repairVitreous china wash down water closet pan (pedesatal pattern) (EWC)white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete fixed in repairs. 75 Supply and fixin repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe complete all as specified and as directed. 76 S&F in repair wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length complete all as specified and as directed. 77 S&Fof PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. 78 S&Fin repairs bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 79 S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair complete all as specified and as directed. 80 S&F in repairs angle valve,fancy type chromium plated, brass, 15mm bore complete all as specified and directed. 81 Supply and fixed in repairs sinks without drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all complete as specified and as directed. 82 S&F in repair 1.00 mm thick stainless steel plate rack of size 31x30x10 complete all as specified and directed. (Make - Model No BSKPR-314 of Blue Star/Niralior its equivalent make) 83 Supply & fixing in repair of pillars taps,fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, scewed for iron pipe 15 mm bore complete all as specified and as directed. 84 S&Fin repair Brass CP mixer for mixing hot & cold water screweddown for iron pipeand fixed complete all as specified and directed. 85 S&F in repair central hole basin mixer for WHB complete all as specified and directed complete all as specified and as directed. 86 S&Ffor PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed. 87 S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed. (Bore of pipe 110mm) 88 M&L in repairs for CINahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet100mm) as in repair complete all as specified and as directed. 89 M & L 80 mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified and directed. 90 M&L for coated pre polished coloured chequered cement concrete tiles made with grey cement and pig-ments of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over in pavement / footpath / floors over incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. 91 M&L in repairs for PVC floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet100mm) as in repair complete all as specified and as directed. 92 S&Ffor PVC (SWR) (Bore of pipe 75mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed. 93 S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed . (Bore of pipe 75mm)
