Service And Spare Of Vacuum Filter , Vacuum Filter Spares & Service , S.S. Screen Having 625 Holes/Sq. Inches. (Salem Make) (Minimum Weight 1.2 Kg. Each Screen) , Brass Zigzag Strips (2 Long) , Rubber Hose Pipe (2¼ X 24) , Mud Scrapper 5X10 Mm X 6 Ply(Dunlop Make) For 8 X 16 Vaccum Filter , Araldite 1.8 Kg. Pack , M-Seal 1 Kg. Packing (Pidilite Make) , A) Brass End Strip , B) S.S. End Strip , Copper Revit Round Head 5Mm X 12Mm , Copper Revit Rounf Head 5Mm X 15Mm , Copper Revit Rounf Head 5Mm X 18Mm , Soft Lead 8 Mm Wire , Brass Tube Plate For 8X16 Vaccum Filter , Ss Electrode (No 12) 2.5 Mm Thick , Roller For Mud Conveyor Belt , Ss Clamp For Binding Rubber Hose Pipe 2 1/4X24 , S S Bolt 1/4X3/4 , S.S. Channel 16 Long , Monarch Brass Nozzles , M S Shocket For Monarch Brass Nozzles , Junction Box (S.S. Sheet)From 3Mm Thick Plate Heavy Duty , S.S. Nipple For Decking Plate (As Per Sample) , S.S. Decking Plate For 8X16 (As Per Our Site Vacuum Filter) , S. S. Binding Strip 3/4 X 2-1/4 , S. S.Pipe 1.5Mm Thick, Size=1/2 “ X 46 “ , S. S.Pipe 1.5Mm Thick, Size=1/2 X 65” , S. S.Pipe 1.5Mm Thick, Size=1/2 X 16.5” , S. S.Pipe 1.5Mm Thick, Size=1/2 “ X 28 “ , S. S.Pipe 1.5Mm Thick, Size= 3/4 “ X 7 , S. S.Pipe 1.5Mm Thick, Size=3/4 “ X 6.5 , S. S.Pipe 1.5Mm Thick, Size=3/4 “ X 10 , Round Head S.S. Screw ¼ X 3/4 , S.S. Electrodes (No. 10) Thikness3.15 Mm , Vacuum Filter Vacuumdisc Plate Complete Set (Left & Right) , S.S. Gate Valve(Screw Type) 2” Size , S.S. Electrodes (No. 8) 4Mm Size , Servicing Of Vacuum Filter , After Dismantling Of S.S. Screens Of Vacuum Filter No. 1, 2 & 3, Cleaning Of Decking Plates, Conducting Hydraulic Testing Of Five Way Fitting Connections And Giving Satisfactory Leak Proof Trials Of Same And Thereafter Refitting Of All The Dismantled S.S. Screens Complete In All Respect , Fitting Of New Damaged Five Way Fittings (Complete With Welding Etc.) Of Vacuum Filter No. 1, 2 & 3 And Thereafter Conducting Satisfactory Leak Proof Trials. (5 Way Fitting) , Replacement Of Damaged Decking Plate Nipples Of Vacuum Filter No. 1, 2 & 3 And Welding With Five Ways Fitting, Thereafter Conducting Satisfactory Leak Proof Trials. , Replacement Of Damaged End Strips Of Vacuum Filter With New Strips Complete In All Respect And Thereafter Conducting Satisfactory Leak Proof Trials. Half Filter , Replacement Of Damaged End Strips Of Vacuum Filter No. 3 With New Strips Complete In All Respect And Thereafter Conducting Satisfactory Leak Proof Trials. Full Filter , Replacement Of Damaged Brass/S.S. Channels (16 Ft. Lengthl) Of Vacuum Filter With New S.S/ Brass Channels Complete In All Respect , Replacement Of Damaged Decking Plate Of Vacuum Filter With New Decking Plate Complete In All Respect. , Dismantling & Fitting Both End S.S. Tube Offilter With Vacuum Distribution Plate Infilter And Satisfactory Trial. , Grinding Of Tunion Valve Plate With Bear Plate Of Vacuum Filter And Sucessful Trial At Minimum Of 450Mm Of Vacuum At Junction With Rotation Of Drum. , Vacuum Genration Up To 400Mm At Vacuum Disc (Including Testing Of Pipe Line To Be Made), Keeping In The Condition Of Genration Of Vacuum At Vacuum Pump Was More Then 625Mm. , Repair Of 8 Point Lubricator Ofvacuum Filters (Including Cost Of All Un-Serviceable Parts) , 3/8 Bsp, Non Return Valve, Angle Type, Working Pressure 21 Kg./Sq.Cm. (As Per Sample) , M.S. Plug 3/8 , M.S. Plug 1/2 , M.S.Tee 3/8 , M.S.Elbow 3/8
