Tender For Repair/Replacement Of Street Lights And Other E/M Works At Mes Installation And Other Otm Buildings At Mil Station Kanasar.; 1 Taking down carefully existing unserviceable/perished surface conduit/concealed conduit/batten/casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators, wooden boxes, MS sunken boxes, etc and making good the disturbed surfaces of wall, floors, ceiling, etc to match with the adjoining surfaces, complete all as specified and as directed. 2 M&L for point wiring concealed type with PVC insulated (unsheathed ) cable 1.5 Sq mm (Nominal area) multi stranded FRLS copper conductor 1100 V grade & continuous earth wire PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth in and existing PVC conduit, and sunken boxes but fixing new 3mm thick plastic laminated sheet top cover,sheet screws andafter removing old unserviceable plastic laminated sheet (including cutting chases & making good the disturbed surface) complete all as specified and directed by Engineer-in-Chargefor the following:- Note :- The cost of bakellite sheet is included in the quoted rate 3 Dittoall as per item No 2.00 hereinbefore,but for one light /fan/ buzzer point controlled by one 5 Amp switch one way complete all as specified and directed by Engineer-in-Charge. 4 All as per serial item No. 2.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches complete all as specified and directed by Engineer-in-Charge. 5 All as per serial item No. 2.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board complete all as specified and directed by Engineer-in-Charge. 6 All as per serial item No. 2.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed by Engineer-in-Charge. 7 Material and labour for point wiring complete with 1.5 sqmm(nominal core) PVC insulated unsheathed 1100 volts grade cable multi stranded copper conductor FRLS single core in PVC casing caping of suitable size complete with sunk pressed steel terminel box for fitting /mounting switches / sockets regulators etc with bakelite sheet 3mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connecting to earth dolly for one light / fan point controlled by one switch complete all as specified and directed by Engineer-in-Charge. 8 Dittoall as per item No 7.00 hereinbefore,but for one light /fan/ buzzer point controlled by one 5 Amp switch one way complete all as specified and directed by Engineer-in-Charge. 9 All as per serial item No. 7.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches complete all as specified and directed by Engineer-in-Charge. 10 All as per serial item No. 7.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board complete all as specified and directed by Engineer-in-Charge. 11 All as per serial item No. 7.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed by Engineer-in-Charge. 12 S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts, ISI marked, complete all as specified and as directed. 13 S&F socket outlet, 5 pin, 5/6 Amp, flush type, 230 Volts, ISI marked, complete all as specified and as directed. 14 S&F switch socket combination, 5 in 1, 5/6 Amps, flush type, 230 Volts, ISI marked, complete with junction box all as specified and as directed. 15 S&F switch socket combination, 5 in 1, 15/ 16 Amps, flush type, 230 Volts, ISI marked, complete with junction box all as specified and as directed. 16 S&F in repair electronic fan regulator, flush type, stepped type with 4 step control, 230 Volts,including making hole in sheet top cover and connecting up, ISI marked, complete all as specified and as directed. 17 S&F in repair switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts, ISI marked, complete all as specified and as directed. 18 S&F in repair switch piano, flush type, single pole, one way, 15/16 Amp, 230 Volts, ISI marked, complete all as specified and as directed. 19 S&F in repair socket outlet, 5 pin, 5/6 Amp, flush type, 230 Volts, ISI marked, complete all as specified and as directed. 20 S&F in repair socket outlet universal type, 6 pin, 15/16 Amp, flush type, 230 Volts, ISI marked, complete all as specified and as directed. 21 Supply & fix in replacemet sheet metal enclosure double door powder coated forMCB DB SPN 4 way with Din rail and busbar complete all as specified. 22 Supply & fix in replacemet sheet metal enclosure double door powder coated forMCB DB SPN 8 way with Din rail and busbar complete all as specified. 23 Supply & fix in replacemet sheet metal enclosure double door powder coated forMCB DB SPN 12 way with Din rail and busbar complete all as specified. 24 Supply & fix in replacemet MCB SP 240V ,6 to 32 Amps, 10 KA, C curve rating ISI marked and connecting complete all as specified. 25 Supply & fix in replacemet MCB SPN 240V,32 Amps, 10 KA, C curve rating ISI marked and connecting complete all as specified. 26 Supply & fix in replacemet MCB TPN 415 V, 63 Amps ,10 KA, C curve rating ISI marked and connecting complete all as specified. 27 Supply & fix in replacement self ballasted LED batten Extruded PVC body with PC diffuser, fin and groove shap base for batter heat dissipation4 feet 20 wattto be install at any height on wall / ceilinghaving power factor more than 0.90 , rated voltage AC 220-240 Volt, 50 Hz, cool white 6500K colour temperatur, CRI > 80complete all as specified and directed by Engineer-in-Charge. 28 S&F in replacement self ballasted LED batten, extruded PVC body with PC diffuser fin and groove shape base for batter heat dissipation 2 feet 10 watt to be install at any height on wall/ceiling having power factor more than 0.90, rated voltage AC 220-240 Volt, 50 Hz , cool white 6500K color temperature, CRI>80 etc complete all as specified and directed by Engineer-in-Charge. 29 Supply and fix in replacemnt LED Bulb230V AC09 watt cool day light 6500Kheavy duty complere in wall lights as per existing all as specified and directed by Engineer-in -charge. 30 Supply and fix in replacemnt LED Bulb230V AC15 watt cool day light 6500Kheavy duty complere in wall lights as per existing all as specified and directed by Engineer-in -charge. 31 Supply and Fixing in replacement security lights LED 30 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 65, CRI>80, PF >0.90 LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniform light spread including bracket made out of suitable size ofGI medium grade tubing and fixed with clamps nuts and bolts, washer ccomplete all as specified and directed by Engineer-in-Charge. Make- Havells Cat No LHEXAYP7PN6K030 or equivalant inBajaj ,Crompton, Phillips and Syska 32 Material and labour for dismantling old earthingand supply, installation and testing earthing complete with galvanisedsteel earth plate electrode of size 60 cm×60 cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including galvanised iron earth lead wire 4.0 mm dia by means ofGI bolts/nuts/washers, protected by 15 mm boreGI medium grade pipe.Earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, RCC cover & frame, PCC (1:3:6) type C-2 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation and earth work , all as specified and shown in electrical plate No 3 of MES Schd Part-I. Notes :-(i) PCC Chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting maner.(ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.(iii) On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. 33 Supply and fix in replacement fully diffused recessed mounted 2 X 2 LED luminaire, 36 Watt Environmental friendly, new generation,aesthetically designed, white powder coated CRCA housing ultra modern recess mounting luminaire with high translucent frosted diffuser, having efficency upto 100 Lumens/watt, rated voltage 240 Volt, frequency 50 Hz, PF > 0.95, THD < 10% , CRI > 80 suitable for indoor spaces complete all as specified and directed by Engineer-in-Charge.Make:- Havells Cat Part No- LHEBAEP7IW1W036 or equivalent of Bajaj, Havells, Philips and Syska 34 Supply & installation of Smart Integrated All in one Solar Street Light with Built in Mono Crystalline Panel, Lithium Ferro Phospate (LiFeP0 4 ) Battery, MPPT Charge Controller and PIR Sensor with Colour Temperature 6000-6500K having capacity 20 Watt ,IP 65, 120 lumens/watt , min18 AH lithium ferrous phopshate battery, LED life 50000 hours including bracket made out of suitable size ofGI medium grade tubing and fixed with clamps nuts and bolts, washer , Suitablelength MS tubular pole medium grade with painting as per manufacturer recommendation , testing & commissioning complete including taking down old lighting system all as directed by Engineer-in-Charge.Note :-(i) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced free of cost in the following case :-(a) Manufacturing defects.(b) Failure due to mechanical and electrical impact.(c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries. 35 M & LPCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in foundation of poles/ struts etc as filling & mass concrete complete all as specified and directed by Engineer-in-Charge. 36 M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including form work complete all as specified and directed by Engineer-in-Charge. 37 M & L for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation etc as filling & mass concrete complete all as specified and directed by Engineer-in-Charge. 38 Material and labour for dismantling old earthing of any type. Supply, installation, testing of advanced maintenance free environment friendly CPRI approved earthing 10 feet long 17 mm dia earth electrode made high tensile low carbon steel circular rods, molecular bonded copper on outer surface (minimum copper bonded thickness 250 micron) with terminal to connect incoming copper strip 25 x 3 mm earthing strips with the equipment/machinery of desired length as per site requirement with 02 bags (25 Kg each) of environment friendly backfill compound with ROHS test certificate for each. The remaining space will be filled with soil and top of earth pit covered with high density polymer.Earth pit chamber cover of dimension (300 mm x 300 mm x 214 mm) with locking seal as to achieve the desired ohmic value complete all as specified and directed.Note : (i) Payment will be released only after the resistance value achieved less than 1 ohm. If value of resistance found more than 1 ohm contractor will do the fresh earthing without any extra cost.(ii) Rate of Copper strip 25x3 mm from earthing terminal to equipment/machinery with suitable size nuts/bolts and washers is deemed to be included in rate quoted by tendrer. 39 Supply and fix in replacement fully diffused recessed mounted 1 X 1 LED luminaire, 36 Watt Environmental friendly, new generation,aesthetically designed, white powder coated CRCA housing ultra modern recess mounting luminaire with high translucent frosted diffuser, having efficency upto 100 Lumens/watt, rated voltage 240 Volt, frequency 50 Hz, PF > 0.95, THD < 10% , CRI > 80 suitable for indoor spaces complete all as specified and directed by Engineer-in-Charge.Make:- Havells Cat Part No- LHEBAEP7IW1W036 or equivalent of Bajaj, Havells, Philips and Syska 40 Material and labour for dismantling old earthingand Supply , installation and testing earthing complete with galvanised iron earth plate electrode of size 60 cm×60 cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including GI Strip 32 x 6 mm (upto the body of equipment) by means ofGI bolts/nuts/washers, protected by 40 mm boreGI medium grade pipe.Earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, RCC cover & frame, PCC (1:3:6) type C-2 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation and earth work , all as specified and shown in electrical plate No 3 of MES Schedule Part-I complete all as specified and directed by Engineer-in-Charge. Notes :-(i) PCC Chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting maner.(ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.(iii) On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. 41 Supply and fix in replacement 03 core PVC insulated multi stranded copper conductor cable (flexible) of size 1.5 sqmm, 1100 Volts grade, ISI marked (IS-694), laid in duct / tray / wall / ceiling with the help of steel clamps including cable glands with rubber cover etc complete all as specified & as directed. Note:-T&P required such as ladder/manpower etc are rnclusive in rate quoted.Nothing extra shall be admissible on this account 42 S & F in replacement PVC non modular MCB boxsuitable for MCB 6 to 32 Amp complete all as specified and directed by Engineer-in-Charge. Note :-(i) MCB will be measured and paid separately under respective item. 43 S &F electric shock treatment chart printed on A0 size paper duly plastic laminated and fixed inside a wooden/PVC photo frame of 50 mm width with 3 mm sheet glass and 6 mm plybood backing and suitable hanging arrangement to wall with hooks/steel chain etc, including taking down old U/S one complete all as specified and directed by Engineer-in-charge. 44 S &F First aid chart printed on A0 size paper duly plastic laminated and fixed inside a wooden/PVC photo frame of 50 mm width with 3 mm sheet glass and 6 mm plywood backing and suitable hanging arrangement to wall with hooks/steel chain etc, including taking down old U/S one complete all as specified and directed by Engineer-in-charge. 45 Supply and laying in replacement LT rubber mating chequered type of size 2 mtr x 1 mtr x 12 mm thick as per IS 5424/1969 complete all as specified and directed by Engineer-in-Charge. 46 Supply & fix in replacement switch socket combination box multi purpose with complete PVC board 5 pin 5 Amps flush type including 1.5 sqmm x 3 core multistranded copper wire of minimum 2 meter complete all as specified and directed by Engineer-in-Charge. 47 Supply & fix in replacementswitch socket combination box multi purpose with complete PVC board 3 pin 15 Amps and 3 pin 5 Amps flush type multipurpose 2 in one including 2.5 sqmm x 3 core multistranded copper wire of minimum 2meter as desired complete all as specified and directed by Engineer-in-Charge.
