|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in any type of soil complete all as specified. |
| 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick with soil obtained from excavation complete all as secified and directed. |
| 4 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as spcecified and as directed. |
| 5 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 pipe section in cement concrete (1:2:4) type B1, smooth finished and reforming benching as required for 100 mm bore pipe complete all as specified and directed. |
| 6 | Demolition of brick work /stone work built in cement mortar all as specified and directed. |
| 7 | M & L brick work built in CM (1:6) with old sized sub class B bricks straight or curved on plan exc 6m mean radius all as specified and directed. |
| 8 | M&L rendering 15 mm thick in CM 1:4 on other than fair faces of brick walls finished the surface even and smooth with out using extra cement complete all as specified and directed. |
| 9 | M & L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in coping and finishing the surfaces even and fair (without using extra cement) complete all as specified and directed. |
| 10 | M & L for cement concrete type B-2 1:2:4 (40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 11 | S & F in repairs, 110 mm bore PVC (SWR) pipes, single socketed, fixed to walls in any length with rubber ring joints complete all as specified and directed. |
| 12 | S & F in repairs, 110 mm bore PVC (SWR) pipes, single socketed, laid in trenches orin floors in any length with rubber ring joints complete all as specified. |
| 13 | S & F in repairs, 75 mm bore PVC (SWR) pipes, single socketed, fixed to walls in any length with rubber ring joints complete all as specified and directed. |
| 14 | S & F in repairs, 110 mm bore PVC (SWR) bends (any radius), diminising pieces or tapers (large bore measured) all as specified and directed. |
| 15 | S & F in repairs, 75 mm bore PVC (SWR) bends any radius, diminising pieces or tapers (large bore measured) all as specified and directed. |
| 16 | Cleaning of blocked floor/nahani trap of kitchen, bathroom, wash hand basin and gullly trap etc up to Ist manhole and disposal of waste materials to a distance n.exc 50 m complete all as specified and directed. |
| 17 | Taking up of existing covers of septic tank of any size and cleaning of same including dewatering and digging out sludge, mud state and removing the sludge to a distance exc 250 m and n.exc 500 m where directed by the Engineer -in-Charge, cleaning of inlet and outlet pipes and placing the cover in position complete all as specified and directed. |
| 18 | Cleaning of manholes of any size and depth up to 2.00 mtrs under foul condition by removing MH covers, removing of accumulated liquid, sludge/sediments, transporting the fluid/sludge etc in covered containers and depositing the same out side the camp area/ defence land, cleaning of the manhole with fresh water, placing MH cover back in intact position complete all as specified and directed. |
| 19 | Cleaning of sewage line (any bore) including affected manholes and disposal of waste materials / spoils upto a distance of 250 mtrs by any means (mechanical / manual) including washing out manhole and sewage line and disposal of waste / sludge in pits complete all as specified and directed. |
| 20 | Cleaning and removing individual blockage in IWC/EWC and removing sludge and foreign materials completely, neatly and making serviceble for free flow all as specified and directed. |
| 21 | Demolition of reinforced cement concrete as in manhole covers and the like complete all as specified and directed. |
| 22 | M & L for precast reinforced cement concrete (1:2:4)type B1 (Using 20mm graded stone aggrgate) as in landings, cover slabs (for manholes etc), chajjas, water troughs mangers, shelves and similar articles with plain faces, set in cement mortar (1:4) complete all as specified and directed. |
| 23 | M & L for TMT steel bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 24 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store all as specified and directed. |
| 25 | Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store all as specified and directed. |
| 26 | S & FG I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 15 mm all as specified and directed. |
| 27 | S & FG I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 20 mm all as specified and directed. |
| 28 | Supply, hoisting and fixing in repair rotational moulded PVC water storage tank, 500 litres capacity conforming to IS-12701 (1989) cylindrical vertical type multi-layered with closed top including inlet and necessary fittings outlet and wash out holes of approved make including dismantling or existing tank of any descriptionand removing from site of work complete all as specified and as directed. |
| 29 | S & F in repair 15mm float ball valvehigh pressureof PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe with nesessory fittings and fixed in any position(minimum weight - 210 gms) all as specified and directed. |
| 30 | S & F in repairs Vitreous China Ware Wash hand basin coloured, flat back, size 550x400mm including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of CI cantilever bracket of appropriate size complete all as specified and directed. |
| 31 | S & F in repair 15mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 32 | S & F in repair 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight - 90 gms) all as specified and directed. |
| 33 | S & F in repair 15 mm pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight -110 gms) all as specified and directed. |
| 34 | S & F in repair 15 mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight - 90 gms) all as specified and directed. |
| 35 | S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P\" or `S\" trap, front or back inlet andincluding connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern) including providing new flush pipe complet all as specified and directed. |
| 36 | S & F in repair PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 37 | Demolition of cement concrete (unreinforced) in ground floors and pavings 15 mm (below or above GL) complete all as specified and directed. |
| 38 | M & L for 75 mm thick cement concrete (1:3:6) type C2(using 40 mm graded stone aggregate) as in plinth protection, path and the like, finished surface even and smooth without using extra cement, laid in panels and filling the joints with mixture of bitumen and sand complete all as specified and directed. |
| 39 | M & L for 75 mm thick cement concrete (1:3:6) type C2(using 40 mm graded stone aggregate) as in as in sub base finished fair and rough to receive topping layer complete all as specified and directed. |
| 40 | M & L for rubber moulded precast concrete colour interlocking paver block of 60 mm thickness of M-35 grade conforming to IS - 15658-2006 with grey cement and pigment complete all as specified and directed. |
| 41 | M & L for sand cushioning under floors including watering as required complete all as specified and directed. |
| 42 | M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 43 | Preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent slats and trading oil and greasy spot if any, and finish the surface smooth and even and applying one coat of white wash on walls, rate include up to 2 stories all as specified and directed. |
| 44 | Preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent slats and trading oil and greasy spot if any, and finish the surface smooth and even and applying one coat of white wash on ceiling, rate include up to 2 stories all as specified and directed. |
| 45 | Preparation of old decorated plastered or unplastered surfaces by complete removal of existing treatment and applying two coat of cement base paint over a coat of alkali reistant primer on walls , rate include up to 2 stories all as specified. |
| 46 | Preparation of old decorated plastered or unplastered surfaces by Preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of exterior emulsion (Apex) weather proof paint on any surface complete all as specified and directed. |
| 47 | Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent slats and trading oil and greasy spot and applying one coat of distemper oil emulsion rate include up to 2 storiesall as specified and directed. |
| 48 | Preparation of old decorated plastered or unplastered surfaces by complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over a coat of 1mm thick wall care putty complete all as specified and directed. |
| 49 | Preparation of old painted wooden surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 50 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint rate include up to 2 stories all as specified and directed. |
| 51 | Re-writing re-painting existing letters or figures (Block, Roman, Times New Roman, Italic, Indian) n exc 30 cm height, rate include up to 2 stories all as specified and directed. |
| 52 | Re-writing re-painting existing index hands (natural size) or arrows (up to 40 cm long) on concrete or brick walls, sign board , road pavement etc as directed. |
| 53 | Uprooting of vegetation growth from walls, roof chajja gutter cleaning the surface and making good holes with cement mortar (1:3) each hole not exceeding 0.10 Sqm rate include up to 2 stories all as specified and directed. |
| 54 | Taking down cement plaster from brick/stone masonry walls/ceilings etc including racking out joints hacking for keys and scrubbing down with water etc complete all as specified and directed. |
| 55 | M & L 15 mm thick rendering in cement mortar 1:6 on fair face of brick wall surfaces finished the surface even and fair complete all as specified and directed. |
| 56 | M & L for applying two coats of OBD on newly plastered surfaces of walls over one coat of primer and including preparation of surfaces complete all as specified and directed. |
| 57 | M&L rendering 15 mm thick in CM 1:4 on other than fair faces of brick walls finished the surface even and fair complete all as specified and directed. |
| 58 | M & L for applying two coats of cement base paint over a coat of alkali resistant primer on walls and including preparation of surfaces complete all as specified and directed. |
| 59 | M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash on walls and including preparation of surfaces complete all as specified and directed. |
| 60 | M&L rendering5 mm thick in CM 1:3 on fair face of ceiling finished the surface even and fair complete all as specified and directed. |
| 61 | M & L for applying three coats of white wash on newly plastered surfaces of ceiling and including preparation of surfaces complete all as specified and directed. |
| 62 | M & L for complete removal of existing treatment using mechanical device and applying two coats of exterior emulsion paint (weather coat of Berger or equivalent) on old plastered surfaces of wall with airless electric sprayers over one coat of exterior grade wall care putty of 1 to 1.5mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed.NOTE:- Application to be done through the authorised applicator of the manufacturer. |
| 63 | M & L for complete removal of existing treatment using mechanical device and applying two coats of OBD on old plastered surfaces of wall with airless electric sprayers over one coat of wall care putty of 1 to 1.5mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through the authorised applicator of the manufacturer complete all as specified and directed.MAKE/APPLICATOR:- Royale luxury emulsion shyne distemper of Asian paint / Nerolac beauty acrylic distemper / Berger bison acrylic distemper |
| 64 | M & L for complete removal of existing treatment using mechanical device and applying two coats of OBD on old plastered surfaces of ceiling with airless electric sprayers over one coat of wall care putty of 1 to 1.5mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through the authorised applicator of the manufacturer complete all as specified and directed.MAKE/APPLICATOR:- Royale luxury emulsion shyne distemper of Asian paint / Nerolac beauty acrylic distemper / Berger bison acrylic distemper |
| 65 | Note : Tenderers may note that amount of credit Rs 25,420.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. |
