}

Tender For Glass Changing Works, salem-Tamil Nadu

Tamil Nadu State Transport Corporation Limited has published Tender For Glass Changing Works. Submission Date for this Tender is 30-08-2024. Vehicle Maintenance Service Tenders in salem Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

43408356
Corrigendum : Tender For Glass Changing Works
Open Tender
Indian
Tamil Nadu
Salem
30-08-2024

Tender Details

Tender For Glass Changing Works; 1 PAINTING of F.C Vehicles, Inside & Outside including of Under chassis Red oxide painting, cleaning and complete painting work a) Ordinary Town Bus ( BS II & BS III) Per veh b) Ordinary Mofussil Bus ( BS II & BS III) Per veh c) Renovation Town Bus (BS III) (AIS 052) Per veh d) Renovation Mofussil Bus (BS III) (AIS 052) Per veh e) BS IV Mofussil Bus (AIS 052) Per veh f ) BS IV A/C Mofussil Bus (AIS 052) Per veh h) BS VI Mofussil Bus (AIS 052) Per veh 10 2 FC Vehicle Seat Liner Rexine works (Removing, Stitching & Refitting works) a) One pass. seat 1 no b) Two pass. Seat 1 no c) Three pass. Seat 1 no d) One pass Backrest 1 no e) Two pass Backrest 1 no f) Three pass Backrest 1 no g) One pass. Backrest (Exp.type) BS IV 1 no h) One pass. Seat (Exp.type) BS IV 1 no i) Exp. type Head rest cover 1 no j) Bonnet cover 1 no k) Foot board shutter 1 no l) Driver door curtain (or) Side curtain 1 no m) Gear Box cover 1 no n) Driver seat cover 1 no 3 FC Vehicles Old Spring assemblies removed and RC Spring assembly Refitting work. a) Leyland Front / Rear spring assy Replacing work 1 no b) TATA Front / Rear spring assy Replacing work 1 no c) Tata / Leyland Front / Rear Hanger Replacing work 1 no 11 4 FC Vehicles Old Units removed and RC Units Refitting work. ( Leyland & Tata) a) Replacing of Radiator assembly 1 no b) Replacing of Radiator & Water pump assembly 1 set c) Replacing of Radiator, Water pump Air Compressor assembly 1 set d) Replacing of Gear Box assembly 1 no e) Replacing of Gear Box with Flywheel setting assembly 1 set f) Replacing of Front Joint assy 1 no g) Replacing of Middle Joint assy 1 no h) Replacing of Rear Joint assy 1 no i) Replacing of Driving Head assembly 1 no j) Replacing of Tie Rod assy 1 no k) Replacing of Pull & Push Rod assy 1 no l) Replacing of Front Brake Chamber assy 1 no m) Replacing of Rear Brake Chamber assy 1 no n) Replacing of Slack Adjuster 1 no o) Replacing of Front Engine Bed 1 no p) Replacing of Rear Engine Bed 1 no 12 5 FC VEHICLE FRONT AXLE WORK a) Removing of Old Front Axle assembly and Refitting of RC Front axle assembly, Wheel Alignment, completing of works 1 no. 6 SPRING ASSEMBLY a) Reconditioning of Leyland / Tata Spring assemblies (Dismantling, cleaning, cambering, Assembling, Drilling / Clamp fabricated & fitting completing of works) 1 no b) Old Spring assemblies Unloading from Sector Lorry 1 no c) RC Spring assemblies Loading to the Sector Lorry 1 no 7 Reconditioning of Self Motor & Alternator Spares a) Leyand & Tata BS III & BS IV Self Motor Field coil Rewinding work with 2 nos. Carbon Brush 1 no. b) Leyland & Tata BS III & BS IV Self Motor Bendex Drive assy RC work. 1 no. c) Leyland & Tata BS III & BS IV Self Motor Solenoid switch RC work. 1 no. d) Leyland & Tata BS III & BS IV Self Motor Armature Rewinding work with commudator. 1 no. e) Leyland BS III & BS IV Self Motor Brush Gear RC works with 2 nos. Carbon Brush 1 no. f) Tata BS III & BS IV Self Motor Brush Gear assy RC work with 2 nos. Carbon Brush 1 no. g) Leyland BS III & BS IV Alternator Regulator RC Work. 1 no. h) Leyland BS III & BS IV Alternator Stator coil (55 Amp) Rewinding Work. 1 no. i) Leyland BS III & BS IV Alternator Rotor coil (55 Amp) Rewinding Work with Slip Ring & Bearing 1 no. j) Leyland A/C BS IV Alternator Stator coil (85 Amp) Rewinding Work. 1 no. k) Leyland A/C & BS IV Alternator Rotor coil (85 Amp) Rewinding Work with Slip Ring & Bearing 1 no. l) Tata BS IV Alternator Stator Coil (100 Amp.) Rewinding work 1 no. m) Tata BS IV Alternator Rotor Coil (100 Amp.) Rewinding work with Slip Ring & Bearing 1 no. n) Tata BS IV Alternator (100 Amp) Regulator RC Work. 1 no. 16 21 GLASS CHANGING WORK a) Front Wind Screen Glass changing work to the BS II & BS III Vehicles 1 no. b) Rear Wind Screen Glass changing work to the BS II & BS III Vehicles 1 no. c) Front Wind Screen Glass changing work to the BS IV Vehicles ( Ordinary) 1 no. d) Rear Wind Screen Glass changing work to the BS IV Vehicles (Ordinary) 1 no. e) Front Wind Screen Glass changing work to the BS IV & BS VI Vehicles ( Hi-Tech) 1 no. f) Rear Wind Screen Glass changing work to the BS IV & BS VI Vehicles (Hi-Tech) 1 no. 21 GLASS CHANGING WORK a) Front Wind Screen Glass changing work to the BS II & BS III Vehicles 1 no. b) Rear Wind Screen Glass changing work to the BS II & BS III Vehicles 1 no. c) Front Wind Screen Glass changing work to the BS IV Vehicles ( Ordinary) 1 no. d) Rear Wind Screen Glass changing work to the BS IV Vehicles (Ordinary) 1 no. e) Front Wind Screen Glass changing work to the BS IV & BS VI Vehicles ( Hi-Tech) 1 no. f) Rear Wind Screen Glass changing work to the BS IV & BS VI Vehicles (Hi-Tech) 1 no. 17 22 TYRE & TUBE REPAIR WORK Corporate Tyre plant at Dharmapuri i) 10.00 X 20 Radial Tyre Injury Repair works a) 1/2 “ x 1/2 “ Cut Repair Work 1 no. b) 1” x 1” Cut Repair Work 1 no. c) 2”x1” Cut Repair Work 1 no. d) 3”x1” Cut Repair Work 1 no. e) Spot Cut Repair (Any Size) 1 no. f) Shoulder Repair 1 no. g) Loose Cord Repair work (Full Round) 1 no. ii) Tube Repair Works a) Tube Puncture Work 1 no. b) Tube Mouth Fixing Work 1 no. iii) 10.00X 20 Tubeless Tyre Injury Repair works a) 1/2 “ x 1/2 “ Cut Repair Work 1 no. b) 1” x 1” Cut Repair Work 1 no. iv) Heavy Repair in Risk Tyres a) More than 3 “ Cut Repair Work 1 no. v) Belt Cutting work a) Cutting and removing of usable Tread Belts from Old / Condemned Radial Tyres (10.00 x 20) 1 no. b) Cutting and removing of usable Tread Belts from Old / Condemned Tubeless Tyres (10.00 x 20) 1 no. vi) Tyre Retreading work a) Old Radial Tyre Buffing & Building work (10.00 x 20 Tyre) 1 no. b) Old Tubeless Tyre Buffing & Building work (10.00 x 20 Tyre) 1 no. e) Radial / Tubeless Tyre Curing (Electric chamber) (10.00 x 20 Tyre) 1 no. a) Tyre Loading to the Lorry 1 no. b) Tyre Unloading from the Lorry 1 no. c) Tube Loading to the Lorry 1 no. d) Tube Unloading from the Lorry 1 no. e) Flab Loading to the Lorry 1 no. f) Flab Unloading from the Lorry 1 no. g) Rubber scrap materials Loading to the Lorry 1 Ton h) Rubber scrap materials Unloading from the Lorry 1 Ton i) TNSTC Seal punching on New Tyre 1 no.

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 09-07-2024 Date Corrigendum 3 Date 15-07-2024
2 13-06-2024 Date Corrigendum Date 25-06-2024
3 13-08-2024 Date Corrigendum 6 Date 30-08-2024
4 15-07-2024 Date Corrigendum 4 Date 29-07-2024
5 26-06-2024 Date Corrigendum 2 Date 08-07-2024
6 30-07-2024 Date Corrigendum 5 Date 12-08-2024

Key Value

Document Fees
Refer document
EMD
INR 3000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail