Tender For Procurement Of Chilled Water Piping And Controls For The Hvac System , Main Item - Chilled Water Piping (As Per Technical Specifications Mentioned At Point 4 And Warranty As Per Schedule Of The Tender Document) , Supply, Installation, Testing, And Commissioning Of Chilled Water Piping As Per Approved Working Drawings, Schedule, And Specifications. The Contractor Is To Include The Cost Of Supports To Be Provided Strictly As Per The Tender Drawings. , M.S.C Class Pre-Insulated Chilled Water Piping Confirming To Is 1239 & Is – 3589 Both Revised Till Date Complete With Bends, Reducers, Tees, Supports, Vibration Isolators, Flow Indicators, Bellow For Pressure Gauges, Sensors And Controls Etc. Insulation Material Shall Be Polyurethane Foam 50 Mm Thick For Pipes Up To 150 Mm Dia. The Jacket Material Shall Be 22G Aluminium Sheet. Joints Shall Be Insulated On-Site With Puf Poured Manually. , 150Mm Dia. , M.S.C Class Pipes For Laying The Chilled Water Pipelines Underground As Per The Attached Tender Drawings. , 300Mm Dia. , Supply, Installation, Testing, And Commissioning Of Valves Duly Insulated With The Same Specifications As That Of Connected Piping Complete With Companion Flanges, Nuts, Bolts, Gaskets, Adequate Support, Etc. As Specified. , Butterfly Valves , 150Mm Dia - Pn16 , 80Mm Dia , 50Mm Dia , Motorised Butterfly Valves , 150Mm Dia - Pn16 , Supply, Installation, Testing, And Commissioning Of Test Points In Brass/Bronze Construction With Non-Return Ring Complete With Suitable Size Socket On Insulated Lines Complete Nipples, Etc. As Required For Measurement Of Pressure And Temperature. , Supply Of Digital Thermometer With Adopter For Above Test Point. , Supply Of Digital Pressure Gauge With Adopter For Above Test Point. , Automation Control , Supply, Installation, Testing & Commissioning Of Immersion Temperature Sensor Fitted With An Element Having A Positive Temperature Coefficient. The Temperature Measuring Range Shall Be -50 Deg C To + 105 Deg C. , Supply, Installation, Testing & Commissioning Of Immersion Temperature Sensor Fitted With An Element Having A Positive Temperature Coefficient. The Temperature Measuring Range Shall Be -50 Deg C To + 105 Deg C. , Supply, Installation, Testing & Commissioning Of Btu Meter With Complete Package Comprising Of Flow Metering Device, In And Out Temperature Sensing Probes, Computing Facilities, Integrator For Bms, Etc. All Complete As Required. 150Mm Dia. Pipe / 910 Lpm , Supply, Installation, Testing, And Commissioning Of G.I. Conduit, Wiring, And Cabling For Sensors And Controls Complete With All The Fittings, Clamps, And Supports All Complete.