Tender For Procurement Of Components For Aeromodeling And Vtol Laboratory-, Ahmedabad-Gujarat

Tender For Procurement Of Components For Aeromodeling And Vtol Laboratory- VTOL Vehicle (Prototype vehicle for flying and testing) Ready to fly:  Wingspan: 2100mm  VTOL arm: 744mm  Fuselage height: 156mm (without foot pads)  Fuselage length: 1200mm  Wing area: 59dm2  Cruising speed: 18-21m/s  Max. payload: 1kg  Maximum takeoff weight: Less than 7.5kg  Maximum takeoff altitude: 3000m(altitude) Simulator  RF 9.5  CD drive  Simulator cable  RC phoenix 5 Fabrication Materials: (Standard Dimension) Dimension Depron sheet 3mm Depron sheet 5mm Depron sheet 8mm Super compress 5mm Super compress 8mm HDT thermacole for wings Pink sheet Chuck gliders Electronics: (Standard) Battery checker Bullet connectors XT60 connector Servo tester Thrust checker Battery connector (XT60 -T plug) Omni directional antena Lollypop antena Servo Horns Extension cord (60cm) Y-cord (50cm) Jumper wire (MM, MF, FF) Silicon wire Strips (10 mtr) Soldering Kit:  Soldering Tip  soldering wire  Flux  Soldering station  Soldering iron  Soldering mat  Soldering wick  Steel twitter  Magnifying glass  Hot blower  Hot shrink tube Battery Lipo (4200mah,6 cell) Batteries Lipo (1500mah,4 cell) Batteries Lipo (450mah,3 cell) Batteries ESC 80amp 40amp 30amp (with BEC) 30amp (without BEC) 55 amp T-motor ESC (6s working ) BLDC Motor DYS 1400 kv (2826) DYS 2200 kv (2212) DYS 1250 kv (3536) E-max 935 kv (for 450 frame drone) E-max Eco 2nd series (2306) E-max 340kv Racestar 2300kv T-motor As2814 long shaft 1050kv T-motor As2814 long shaft 1200kv EDF Motor shaft Propeller: (ABS/PLA) 10x45 Training 10x6 HD Prop 9x6 HD 9x4 HD 11 HD 5 inch Triblade foldable 5 inch Triblade T-motor 16x4 inch Stationary: Pen cutter Cutter Wire cutter Electric tape Tape (1,2,3 inch) Scale (15,30,60,100 cm), Geometry set Scissor Glue gun Glue sticks Fevicol Stapler Clips Filar Zip tie White chart papers Stop watch hand tools: Drill machine Hand grinder Screws for mounting Hand tool kit Screw driver set Metal carbon File Wall panel set Screw organiser Ln keys Nose plier Plier Wing cutter Nicrom wire Wire for connecting rods Mounting U shape aluminium road for wing Carbon fiber rod Vacuum bagging setup (For carbon Flight Controller APM 2.8 Flight Controller with Built- DJI NAZA-M Lite V1.1 with GPS CUAV V6X Flight Controller Others: First aid kit Landing Gear Leveler Drawers/Storage VTOL Vehicle (Prototype vehicle for flying and testing) Ready to fly (As per Annexure-I) Simulator (As per Annexure-I) Fabrication Materials (Standard Dimension): Depron sheet 3mm Depron sheet 5mm Depron sheet 8mm Super compress 5mm Super compress 8mm HDT thermacole for wings Pink sheet Chuck gliders Electronics (Standard): Battery checker Bullet connectors XT60 connector Servo tester Thrust checker Battery connector (XT60 -T plug) Omni directional antena Lollypop antena Servo Horns Extension cord (60cm) Y-cord (50cm) Jumper wire (MM, MF, FF) Silicon wire Strips (10 mtr) Soldering Kit (As per Annexure-I) Battery: Lipo (4200mah,6 cell) Batteries Lipo (1500mah,4 cell) Batteries Lipo (450mah,3 cell) Batteries ESC: 80amp 40amp 30amp (with BEC) 30amp (without BEC) 55 amp T-motor ESC (6s working ) BLDC Motor: DYS 1400 kv (2826) DYS 2200 kv (2212) DYS 1250 kv (3536) E-max 935 kv (for 450 frame drone) E-max Eco 2nd series (2306) E-max 340kv Racestar 2300kv T-motor As2814 long shaft 1050kv T-motor As2814 long shaft 1200kv EDF Motor shaft Propeller (ABS/PLA): 10x45 Training 10x6 HD Prop 9x6 HD 9x4 HD 11 HD 5 inch Triblade foldable 5 inch Triblade T-motor 16x4 inch Stationary (As per Annexure-I) Hand Tools (As per Annexure-I) Vacuum bagging setup (For carbon fibre lamination) Flight Controller: APM 2.8 Flight Controller with Built-in Compass DJI NAZA-M Lite V1.1 with GPS Kit CUAV V6X Flight Controller Others (As per Annexure-I)

Refer document

INR 35520.0 /-

Refer document