Tender For Spr2000144585 90&100 Liquid Steel Ladle-16&7 Shell Plate Rep 2000144585 90 10 10 Refurb. of Liquid steel Teeming Ladle 40 TO Email : meena.bhagat@amns.in Contact : Name : Meena Bhagat Item Details : LIQUID STEEL LADLE-16 SHELL PLATE REPAIR Annexure – 1 (SOW- SMP2 LADLE SHELL REPLACEMENT),, ,,,, 1. Job Details:-,, ,,,, 1 ,,Shifting of raw material from Central Stores.,, 2 ,,Pre-fabrication activities.,, 3 ,,Fabrication as per approved drawing & QAP.,, 4 ,,Painting of Equipment as per standard.,, 5 ,,NDT (DP/UT or both) test to be performed for all weld joints as per approved QAP.,, 6 ,,Dimensional, Quality & Parametric Inspection as per approved drawing & QAP.,, 7 ,,Heat Treatment of the Job strictly as per QAP wherever required.,, 8 ,,Cutting & removal of shell, Trunion-2 no along with Dish end for re-use. It can be replaced with new one also as per the end user requirement.,, 9 ,,Cutting, Bending & drilling of Shell plates & dish end as per drawing.,, 10,,Drg No. 1001202200EPD40H001 sh 4/6 Item No. 1 (Shell plates) are to be sent for rolling to outside vendor. ,, 11,,Drg No. 1001202200EPD40H001 sh 6/6 Item No. 1 & 2 are to be sent for rolling to outside vendor.,, 12,,Any rectification for side bracket of Ladle to be done.,, 13,,Fit-up of removed/New Trunion-2 no.,, 14,,Rework & Job in Dish end & Trunnion as per drawing & QAP if required.,, 15,,Fit-up & fabrication of full Ladle as per drawing.,, ,,,, 2. Scope of Work- Vendor: -,, ,,,, 1,,Manpower for scaffolding/platform fixing and removal (For Heat Treatment related jobs, if required as per QAP) are in vendor’s scope.,, 2,,Manpower for any plate/structural/pipe bending/rolling is in vendor’s scope.,, 3,,Ensure availability of required Safety PPEs to their Supervisor & Technicians.,, 4,,Ensure selection of Supervisor & Technicians as per job execution & AM/NS approved MSA,, 5,,Ensure completion of required training as per MSA for all Supervisor & Technicians.,, 6,,Certified Welding Machine with short cable & its consumables will be supplied by Contractor.,, 7,,Certified Cutting set and its consumables will be supplied by Contractor.,, 8,,Tools & Tackles, lifting belts and Chain Pulley Blocks is in Contractor’s scope. He must have certificates for all tools and tackles in a single file.,, 9,,Co-ordination for internal movement within CMS is in Contractor’s scope.,, 10,,Job execution of anchor fixing and removal for glass wool and heating coil for heat treatment process (if required as per QAP) are in Page 2 of 5 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112266 Date 10.05.2024 Submission Date 17.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Latha ArunKumar Contact Email latha.arunkumar@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details vendor’s scope.,, 11,,Shifting of job till dispatch for any intermediate operation within AMNS boundary is in vendor’s scope.,, 12,,Jigs and fixtures for all jobs are in vendor’s scope.,, 13,,All welding electrodes which comes under AWS specification are in vendor’s scope.,, 14,,Job should be performed strictly according to QAP only. Any job exclusion or inclusion would be separately mentioned in work order (If any).,, 15,,Cutting & removal of shell, Trunion-2 no along with Dish end for re-use. It can be replaced with new one also as per the end user requirement.,, 16,,Cutting, Bending & drilling of Shell plates & dish end as per drawing.,, 17,,Drg No. 1001202200EPD40H001 sh 4/6 Item No. 1 (Shell plates) are to be cut in final size followed by drilling (except balancer plate area which is to be done at final stage at CGS).,, 18,,Drg No. 1001202200EPD40H001 sh 6/6 Item No. 1 & 2 are to be cut in final size for sending to outside for rolling (drills are to be at final stage at CGS).,, 19,,Any rectification for side bracket of Ladle to be done.,, 20,,Fit-up of removed/New Trunion-2 no.,, 21,,Rework & Job in Dish end & Trunnion as per drawing & QAP if required.,, 22,,Fit-up & fabrication of full Ladle as per drawing & QAP.,, 23,,Transportation via Bus service/Utility vehicle of owned associates shall be in Contractor’s Scope.,, 24,,Supervision for job execution at Plant site is in Contractor’s scope.,, 25,,Supervisor & Technicians should follow all Safety norms of AM/NS India.,, 26,,Contractor should submit job certification sheet duly signed by Execution engineer & Section in-charge with SAP Notification no.,, ,,,, ,,,, 3. Scope of Work- AM / NS Steel: -,, ,,,, 1,,Supervision and Job certification for executed jobs is in AM/NS scope.,, 2,,Co-ordination for shutdown and work permit is in AM/NS scope.,, 3,,Provision of Drawing & Design is in AM/NS scope.,, 4,,Provision of all Spares including Paint for fabrication job execution is in AM/NS scope.,, 5,,Provision of all Structural materials-angle, channel, beam, plates, pipes, etc. is in AM/NS scope.,, 6,,Drinking water, Power supply, lighting facilities, Working Platform, etc. for workmen at Plant site is in AM/NS scope.,, 7,,To & Fro arrangement for ready Equipment & Plates shifting is in AM/NS scope.,, 8,,AM/NS to ensure that jobs are evacuated immediately after its readiness.,, 9,,Final inspection and clearance before dispatch as per approved drawings & QAP.,, 10,,Sand Blasting and Painting for the jobs are in AM/NS scope.,, 11,,Heat Treatment of the job (if required) as per CDE Team guidelines along with heat cycle; mentioned in QAP approved by CMS inspection team. ,, 12,,All machining jobs for job requirement are in AM/NS scope in coordination with CMS.,, 13,,All welding electrodes which do not come under AWS specification (special electrode) are in AM/NS scope. ,, 14,,Machine and its operator required for plate bending/rolling is in AMNS scope for job completion.,, 15,,Hydraulic Power pack, jack are in AM/NS scope (if required).,, ,,,, 4. Specific Penalty for non-performance by vendor and must be cardinally Page 3 of 5 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112266 Date 10.05.2024 Submission Date 17.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Latha ArunKumar Contact Email latha.arunkumar@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details measured,, ,,,, a),, Non-conformity of Work.,, b),,Penalty will be imposed in case of noncompliance to HSE norms.,, c),,Penalty will be applicable due to poor workmanship, Safety violation, damage to AM/NS ,, ,,property from contractor side.,, d),,As per Management Directive, transport / movement of associates to & fro for Plant should by mandatorily in 4 Wheelers and Buses. Bicycles and Two wheelers are strictly not allowed. ,, Item Note : 2 2000144585 100 20 10 Refurb. of Liquid steel Teeming Ladle 40 TO Email : meena.bhagat@amns.in Contact : Name : Meena Bhagat Item Details : LIQUID STEEL LADLE-07 SHELL PLATE REPAIR Annexure – 1 (SOW- SMP2 LADLE SHELL REPLACEMENT),, ,,,, 1. Job Details:-,, ,,,, 1 ,,Shifting of raw material from Central Stores.,, 2 ,,Pre-fabrication activities.,, 3 ,,Fabrication as per approved drawing & QAP.,, 4 ,,Painting of Equipment as per standard.,, 5 ,,NDT (DP/UT or both) test to be performed for all weld joints as per approved QAP.,, 6 ,,Dimensional, Quality & Parametric Inspection as per approved drawing & QAP.,, 7 ,,Heat Treatment of the Job strictly as per QAP wherever required.,, 8 ,,Cutting & removal of shell, Trunion-2 no along with Dish end for re-use. It can be replaced with new one also as per the end user requirement.,, 9 ,,Cutting, Bending & drilling of Shell plates & dish end as per drawing.,, 10,,Drg No. 1001202200EPD40H001 sh 4/6 Item No. 1 (Shell plates) are to be sent for rolling to outside vendor. ,, 11,,Drg No. 1001202200EPD40H001 sh 6/6 Item No. 1 & 2 are to be sent for rolling to outside vendor.,, 12,,Any rectification for side bracket of Ladle to be done.,, 13,,Fit-up of removed/New Trunion-2 no.,, 14,,Rework & Job in Dish end & Trunnion as per drawing & QAP if required.,, 15,,Fit-up & fabrication of full Ladle as per drawing.,, ,,,, 2. Scope of Work- Vendor: -,, ,,,, 1,,Manpower for scaffolding/platform fixing and removal (For Heat Treatment related jobs, if required as per QAP) are in vendor’s scope.,, 2,,Manpower for any plate/structural/pipe bending/rolling is in vendor’s scope.,, 3,,Ensure availability of required Safety PPEs to their Supervisor & Technicians.,, 4,,Ensure selection of Supervisor & Technicians as per job execution & AM/NS approved MSA,, 5,,Ensure completion of required training as per MSA for all Supervisor & Technicians.,, 6,,Certified Welding Machine with short cable & its consumables will be supplied by Contractor.,, 7,,Certified Cutting set and its consumables will be supplied by Contractor.,, 8,,Tools & Tackles, lifting belts and Chain Pulley Blocks is in Contractor’s scope. He must have certificates for all tools and tackles in a single file.,, 9,,Co-ordination for internal movement within CMS is in Contractor’s scope.,, Page 4 of 5 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112266 Date 10.05.2024 Submission Date 17.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Latha ArunKumar Contact Email latha.arunkumar@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details 10,,Job execution of anchor fixing and removal for glass wool and heating coil for heat treatment process (if required as per QAP) are in vendor’s scope.,, 11,,Shifting of job till dispatch for any intermediate operation within AMNS boundary is in vendor’s scope.,, 12,,Jigs and fixtures for all jobs are in vendor’s scope.,, 13,,All welding electrodes which comes under AWS specification are in vendor’s scope.,, 14,,Job should be performed strictly according to QAP only. Any job exclusion or inclusion would be separately mentioned in work order (If any).,, 15,,Cutting & removal of shell, Trunion-2 no along with Dish end for re-use. It can be replaced with new one also as per the end user requirement.,, 16,,Cutting, Bending & drilling of Shell plates & dish end as per drawing.,, 17,,Drg No. 1001202200EPD40H001 sh 4/6 Item No. 1 (Shell plates) are to be cut in final size followed by drilling (except balancer plate area which is to be done at final stage at CGS).,, 18,,Drg No. 1001202200EPD40H001 sh 6/6 Item No. 1 & 2 are to be cut in final size for sending to outside for rolling (drills are to be at final stage at CGS).,, 19,,Any rectification for side bracket of Ladle to be done.,, 20,,Fit-up of removed/New Trunion-2 no.,, 21,,Rework & Job in Dish end & Trunnion as per drawing & QAP if required.,, 22,,Fit-up & fabrication of full Ladle as per drawing & QAP.,, 23,,Transportation via Bus service/Utility vehicle of owned associates shall be in Contractor’s Scope.,, 24,,Supervision for job execution at Plant site is in Contractor’s scope.,, 25,,Supervisor & Technicians should follow all Safety norms of AM/NS India.,, 26,,Contractor should submit job certification sheet duly signed by Execution engineer & Section in-charge with SAP Notification no.,, ,,,, ,,,, 3. Scope of Work- AM / NS Steel: -,, ,,,, 1,,Supervision and Job certification for executed jobs is in AM/NS scope.,, 2,,Co-ordination for shutdown and work permit is in AM/NS scope.,, 3,,Provision of Drawing & Design is in AM/NS scope.,, 4,,Provision of all Spares including Paint for fabrication job execution is in AM/NS scope.,, 5,,Provision of all Structural materials-angle, channel, beam, plates, pipes, etc. is in AM/NS scope.,, 6,,Drinking water, Power supply, lighting facilities, Working Platform, etc. for workmen at Plant site is in AM/NS scope.,, 7,,To & Fro arrangement for ready Equipment & Plates shifting is in AM/NS scope.,, 8,,AM/NS to ensure that jobs are evacuated immediately after its readiness.,, 9,,Final inspection and clearance before dispatch as per approved drawings & QAP.,, 10,,Sand Blasting and Painting for the jobs are in AM/NS scope.,, 11,,Heat Treatment of the job (if required) as per CDE Team guidelines along with heat cycle; mentioned in QAP approved by CMS inspection team. ,, 12,,All machining jobs for job requirement are in AM/NS scope in coordination with CMS.,, 13,,All welding electrodes which do not come under AWS specification (special electrode) are in AM/NS scope. ,, 14,,Machine and its operator required for plate bending/rolling is in AMNS scope for job completion.,, 15,,Hydraulic Power pack, jack are in AM/NS scope (if required).,, Page 5 of 5 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112266 Date 10.05.2024 Submission Date 17.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Latha ArunKumar Contact Email latha.arunkumar@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details ,,,, 4. Specific Penalty for non-performance by vendor and must be cardinally measured,, ,,,, a),, Non-conformity of Work.,, b),,Penalty will be imposed in case of noncompliance to HSE norms.,, c),,Penalty will be applicable due to poor workmanship, Safety violation, damage to AM/NS ,, ,,property from contractor side.,, d),,As per Management Directive, transport / movement of associates to & fro for Plant should by mandatorily in 4 Wheelers and Buses. Bicycles and Two wheelers are strictly not allowed. ,, Item Note
