Tender For Ferritic Steel Coil, kapurthala-Punjab

Supply Of Ferritic Steel Coilferritic Steel Coil,Ferritic Steel Coil 1.6X1250mm., As Per Drawing: Rdso Spec. No. C-K201, Grade X2c Rni12 (409M) Table 1&2, Heat Treatment Condition 2B As Per Table-5., Packing Instruction: Stai Nless Steel Sheets, Coils And Plates:- (A) Stainless Steel (Austenitic & Ferritic Steel) Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Norm Al Handling Hazard During Transit With The Following Provision As The Barest Minim Um: I) Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii) Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii) Outer & I Nner Of Coil Should Be Wrapped With Gi Sheet. Iv) Side Of The Coil Should Be Covered With Card Board Sheet. V) After This Whole Coil Should Be Wrapped With Biodegrade Able Plastic Sheet Of Suitable Thickness. Vi) The Inner Edge Of The Coil Should Be Pr Otected By Gi Ring Followed By Another Iron Ring. Vii) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii) Coil Should Be Securely Strapped With Minium 5 Steel Ba Nds Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. Ix) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting/Stacki Ng. X) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of C Oil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi) The Sheets I N Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Di A Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. (B) Stainless Steel (Austenitic & Fer Ritic Steel Plates/Sheets) I) The Sheets/Plates Shall Be Supplied In Bundles Of Optimu M Weight: 2Mt+/-10% & Each Sheet/Plate Shall Be Seprated With A Layer Of Water Proo F Paper, After This The Whole Bundle Should Be Wrapped With Double Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Metal Prot Ection In Edges Should Also Be Provided. Ii) All Bundles Shall Have A Minimum Of 2 Ho Ops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bu Ndles Shall Also Be Provided With Skid (Wooden Packing Under Neath) To Facilitate H Andling. Mechanical Damange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] => Limited

Refer document

Refer document

Refer document