|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work. |
| 3 | RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. |
| 4 | First class brick work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in S. S including supply of allmaterials, labour & T&P etc. required for proper completion of work. |
| 5 | Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. |
| 6 | Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. |
| 7 | Supply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials,labour & T&P etc. required for proper completion of work. |
| 8 | Supply and fixing Anodized Aluminium Window fittings like 2 no 100 mm handles,2 no 150 mm tower bolt, 1 no stopper including all materials,labour & T&P etc. required for proper completion of work. |
| 9 | Providing and fixing in place a storage cabinet 450 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only. |
| 10 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. |
| 11 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) |
| 12 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. |
| 13 | Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. required for proper completion of the work. |
| 14 | Supply and Laying 6 mm thickglazed tiles of size 300x450 mm in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work. |
| 15 | Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. |
| 16 | Providing and laying of 8 mm thick vitrified floor tiles of approved brand (bell, Johnson or equi. make) in size of 600x600 mm of approved shade, colour and pattern as approved by Engineer incharge with adhesive of approved quality on existing smooth floorincluding cost of all material, labour and T&P required for proper completion of the work |
| 17 | Providing and laying of 16 mm thick granite ( black/ brown) inflooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. |
| 18 | Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint \"Luxol\" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. |
| 19 | As in item 36 above but for every coat after first coat. |
| 20 | As in item 36 above but for every coat on previously paintedold wood or iron work including its sand papering,rubbing andcleaning as required, for proper completion of work. |
| 21 | One priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. |
| 22 | As in item 39 but for every coat after the first coat. |
| 23 | As in item 39 but for every coat on previously old oil bound distemper surface. |
| 24 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. |
| 25 | Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work |
| 26 | Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. |
| 27 | Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint . |
| 28 | Same as in item 13.22 but for each coat ofAPEX or equivalent brand weather coat paint .on previously treated surface. |
| 29 | Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) |
| 30 | Same as above in Item No-47 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint. |
| 31 | Same as above in item no. 47 but one coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint on previously painted surface. |
| 32 | Spirit polish over new wood work after rubbing down the surface, withsand paper to give smooth and shining surface including cost ofall materials, labour, T&P required for proper completion of thework. |
| 33 | Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres. |
| 34 | Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres. |
| 35 | Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. |
| 36 | Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M. |
| 37 | Repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm.(3/8\") depth,watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work . |
| 38 | Supply and filling cinder in sunken floor in 15 cm layers including cost of all labour and T & P etc required for proper completion of the work. |
| 39 | Repair to 2.5 cm (1\") cement concrete floor in patches including up to 10 cm.(4\") depth renewing 8 cm.(3\") base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5\") gauge brick ballast as in C.C.floor consisting of one part cement 2 parts approved coarse sand and 4 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work. |
| 40 | Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made). |
| 41 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. |
| 42 | L drops 16 mm dia x 300 long. |
| 43 | Tower bolts 10 mm dia x 250 mm long. |
| 44 | Tower bolts 10 mm dia x 100 mm long. |
| 45 | Iron hinges 100 mm size.12 gauge.thick |
| 46 | Iron door spring. |
| 47 | M.S.handles 100 mm size |
| 48 | M.S. chain kunda. |
| 49 | L-drop 16 mm dia x 200 mm long. |
| 50 | Supply and replacing of 6 Amp. piano type switch of \" Anchor\" orequivalent make of approved quality including all materials,labour and T&P etc. |
| 51 | Supply and replacing of 6 Amp. Piano type socket of \"Anchor\"equivalent make of approved quality including all materials,labour and T&P etc. |
| 52 | Supply and replacing of 16 Amp.Piano type switch of \"Anchor\" orequivalent make of approved quality including all materials,albour and T&P etc |
| 53 | Supply and replacing of 16 Amp.Piano type socket of \"Anchor\" orequivalent make of approved quality including all materials,labour and T&P etc. |
| 54 | Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. |
| 55 | Same as above but for 20 mm dia. |
| 56 | Same as above but for 25 mm dia. |
| 57 | Same as above but for 65 mm dia. |
| 58 | Providing and fixing full way 20 mm dia G.M. gate valvewith wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 59 | GM Full way Gate Valve 65 mm dia. |
| 60 | Providing and fixing CP BRASS BIB COCK 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 61 | CP BRASSSTOP COCK 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) |
| 62 | CP BRASS Angle Valve HEAVY QUALITY( L&K or equi. ) |
| 63 | Providing and fixing Wash Basin Mixure L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 64 | Providing and fixingWall Mixrure HEAVY QUALITY( L & K and equi.) L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. |
| 65 | Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. |
| 66 | Providing and fixing PLASTIC SEAT COVERCOMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKEDincluding supply of all materials,labour and T&P etc.complete. |
| 67 | Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. |
| 68 | Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. |
| 69 | Supply and fixing PVC Nahani Trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. |
| 70 | Providing and fixing 100 mm dia PVC \"P\" or \"S\" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) |
| 71 | Providing and laying 110mm SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. |
| 72 | Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etcrequired for proper completion of the work. |
| 73 | Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Trap including cost of all materials, labour and T&P etcrequired for proper completion of the work. |
| 74 | Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etcrequired for proper completion of the work. |
| 75 | Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. |
| 76 | Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Door Tee including cost of all materials, labour and T&P etc required for proper completion of the work. |
| 77 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work |
| 78 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 79 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.00 mm thickness |
| 80 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 81 | Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profilewhite/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong MiniralFobre Sound Absorbing Sheet including cost of all materials,labour and T&P etc. required for proper completion of the work. |
| 82 | Providing and fixingACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACPof 4.0 mm thickness |
| 83 | Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havellsor equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge. |
| 84 | Supply and Fixing of 3 blade ceiling fan 1200 mm of Havells or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge. |
| 85 | Providing & fixing ofLamination both side on flush door complete with all fittings(excluding cost of Door Lock & Door Closure), etc all complete all complete as per drawing, specification and direction of engineer incharge. |
| 86 | Providing and laying two coats of Pidifin 2K (Pidilite make) as per manufacturer’s Including supply of all materials, labour and T & P etc required for proper completion of work. |
| 87 | Existing old damage Tile and Fixing Newfalse ceiling with 12mm thick Arm strong Fire resistant gyp board false ceiling system of approved type fixed to a Withrequired hanger Including supply of all materials, labour and T & P etc required for proper completion of work. |
| 88 | Supply and fixing of Concelled cistern with wall mounting frame & instalation kitModel No JCS-WHT--2400WS with control plate lemon design Model No-JSP-CHR-152415 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work . |
| 89 | Supply and fixing of Concelled cistern control plate lemon design Model No-JSR-152415 of Jaquar make as approved by E/I.The work includes cost of all labour, material T&P for proper completion of work . |
| 90 | Supply and fixing of Jet Spray Model No-AHS-1557 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work . |
| 91 | Supply and fixing of of waste Coupling of make Model No-ALD-709L130of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work. |
| 92 | Supply and fixing ofHealth Faucet Model No-ALD-CHR-565 With 1.00 Mtr Long Flexible Tube in chrome Finish and Wall Hookof Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work |
| 93 | Supply and fixing of Wall Hung Model No- CNS -961S Size-536x370x370 with Normal closing seat cover with rack bolt (SS) model No-ZPS -SNS-RB-01 of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work |
| 94 | Supply and fixing of Two way Bib cock with wall flange Model Noopp-15041PM of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work |
| 95 | Supply and fixing ofRack bolt For WC Model No-ZPS-SNS-RB01 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work . |
| 96 | Supply and fixing of Wax Seal Model No-ZPS-WHT-1401 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work |
| 97 | Supply and fixing of Cistren Base Plate Model No- ZMP - CHR-003 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work . |
| 98 | Supply and fixing of Cistren Ball Cock Model No- ZMP - CHR-002 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work . |
| 99 | Supply and fixing of Cistren Syphon Model No- ZMP - CHR-001 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work |
| 100 | Supply and fixing of Conector Pipe Model No- ZPS-WHT-VB01 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work |
| 101 | Supply and fixing of Rubber Gasket Inlet & Outlet Model No- ZPS-WHT-GK01 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work . |
| 102 | Providing & Making & Fixing of Wall Panneling as on damaged surface The surface cladded with 6mm Water Proof & Fire Retardent ply fitted with the help of nails sulution on wall surfaceas per the approveddesign all complete as per drawing, specification and directionas approved by the Architect/ Engineer -in-Charge. |
| 103 | Providing & Making & Fixing of PVC Wall Panneling as per drawing including cost of all material, labour, T & P etc required for proper completion of work as Direction by E/I. |
| 104 | Attending to petty maintenance service like plumbingservice,welder service, mansion service and carpenter servicerequired as below.Job attending by one no.lumber/welder/mason/carpenter with oneno. helper per hour or part of an hour. |
| 105 | Repairng ofold cushioned Single seater Sofa removing of old damage upholstery then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of Sofa using 50 mm thick sleepwell foam 32 denstry, Approved. The work include cost of all labour,material T&P required for proper completion of work |
| 106 | Providing and fixing superior,approved quality cotton curtain height approximately 2.65mtr upper side margin 0.05mtr, lower side margin 0.02 mtr, upper side margin fitted proper tape for hanging curtain with the help of hooks and rings at DIFFRENT cabinof Shakti Bhawan Extn, Lucknow as per direction of Engineer in charge. The work includes cost ofall labour, material and T&P etc. |
