Tender For Monorail Erection & Commissioning, Hazira-Gujarat

Tender For Monorail Erection & Commissioning 020327 10 10 30 Dismantling of Structure 20 TO 20 Monorail structure Fabricat. & Erection. 20 TO 80 Side sheeting - 0.6mm thk erection 250 M 60 Handrailing fabrication & Erection 55 M 10 Monorail erection & commissioning 3 LO 50 Shot blasting and Painting (New Struc.) 20 TO 70 Side sheeting - 0.6mm thk Dismantling 250 M 40 Modification of structure 20 TO Email : Harshesh.Aliwala@amns.in Contact : Name : Harshesh Aliwala Item Details : v SERVICE PROVIDER’S SCOPE OF WORK: 01. Monorail erection <(>&<)> Commissioning a) Installation <(>&<)> Alignment work. b) All welding work to be done by qualified welder approved AM/NS. c) All tools and tackles. d) Scaffolding as per site requirement. e) All lifting and shifting work. f) For electrical work vendors must arrange licensed experience contractor for carrying out crane electrical work. g) For LT/control/Signal cable end termination work all required Lugs (Alum./Copper) <(>&<)> Glands(Brass S.C. /D.C./PVC in scope of contractor. h) Wiring and connection of Power supply, control devices <(>&<)> sensors to ensure proper communication and control of the monorail system. i) All the consumables like welding rods, cable tie, oxygen/gas cylinders ,PVC tape roll, etc.in scope of vendor. j) Vendors have to provide a complete schedule for the job and to be followed strictly to complete the job in scheduled timeline. k) Vendor shall ensure that optimum manpower and other resources will be deployed by them at work site to achieve the target date. l) Vendors will ensure the use of all PPE’s and safety rules and regulations. v AMNS SCOPE: a) Water <(>&<)> electricity will be provided at a single point. b) Working Space will be provided by AM/NS c) For structural steel work all required steel i.e. Angles/channels will be provided by AMNS. d) AM/NS will provide steel material on an accountable basis. The vendor shall submit a reconciliation statement for all. 02. Monorail support structure fabrication <(>&<)> erection SCOPE OF WORK – VENDOR a) New fabrication as per site requirement or as per drawing. b) Blasting and painting of new structure as per below specs. c) Modification of structure if required. d) Supply and application of epoxy paint as per below specification • Total 4 coat of epoxy paints. • Primer: colour grey D.F.T. 30-40 µ (one coat) • MIO : colour brown D.F.T. 80-100 µ ( one coat ) • Finish coat: colour – As per requirement. D.F.T. 35-40 µ (two coat) • Finishing painting of existing structure. • Finish coat: colour – As per requirement. D.F.T. 35-40 µ (two coat) Refer the attached TS for blasting <(>&<)> painting work. e) All the required manpower, Supervision, Tools <(>&<)> tackles i.e., Toolbox, chain block, web slings, D shackles PPEs etc. shall be in the scope of the service provider. f) All the consumables welding electrodes, grinding wheels, gas bottles etc. Shall be in the scope of the service provider. g) All required machines like welding, grinding, drilling, cutting etc. Page 2 of 2 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000110591 Date 18.04.2024 Submission Date 25.04.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Shashimita Gupta Contact Email SHASHIMITA.GUPTA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Shall be in the scope of service provider. h) All welding shall be done by a qualified welder approved by AMNS and as per approved standard procedure/specification mentioned in the drawing /AMNS standard documents Etc. i) Scaffolding as per site requirement. j) Vendors will ensure the use of all PPE’s and safety rules and regulations. v AMNS SCOPE: a) Water <(>&<)> electricity will be provided at a single point. b) Working Space will be provided by AM/NS c) AM/NS will provide steel material on an accountable basis. The vendor shall submit a reconciliation statement for all. 30. Dismantling of Structure SCOPE OF WORK – VENDOR a) All lifting and shifting work. b) Shifting of all structure from ARP-2 to Scrap yard <(>&<)> Shifting material should not more than 1.5 m length. c) Required Man lifter, Hydra, and trailer etc. for material shifting, loading <(>&<)> unloading, erection shall be the scope of the service provider. d) All the required manpower, Supervision, Tools <(>&<)> tackles i.e., Toolbox, chain block, web slings, D shackles PPEs etc. shall be in the scope of the service provider. e) All the consumables welding electrodes, grinding wheels, gas bottles etc. Shall be in the scope of the service provider. f) All required machines like welding, grinding, drilling, cutting etc. Shall be in the scope of service provider. g) All welding shall be done by a qualified welder approved by AMNS and as per approved standard procedure/specification mentioned in the drawing /AMNS standard documents Etc. v AMNS SCOPE: a) Water <(>&<)> electricity will be provided at a single point. b) Working Space will be provided by AM/NS c) AM/NS will provide steel material on an accountable basis. The vendor shall submit a reconciliation statement for all.

Refer document

Refer document

Refer document