}

Auction Sale Of (I). Scrap Of Condemned Casted Bogie Frames Along With Brake Riggingaccessories Of Wdm2/ Wdm3a (Us & Ur) Qty.= 10.366 Mt (02 Nos Bogie Frame){ Unit Weight Of Bogie Frame With Rigging Accessories Approx. = 4. 330 + 0. 853 = 5.183 Mt} (5.183, ludhiana-Punjab

Government Departments has published Auction Sale Of (I). Scrap Of Condemned Casted Bogie Frames Along With Brake Riggingaccessories Of Wdm2/ Wdm3a (Us & Ur) Qty.= 10.366 Mt (02 Nos Bogie Frame){ Unit Weight Of Bogie Frame With Rigging Accessories Approx. = 4. 330 + 0. 853 = 5.183 Mt} (5.183. Submission Date for this Tender is 08-04-2024. Scrap Tenders in ludhiana Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

43084257
Auction Sale Of (I). Scrap Of Condemned Casted Bogie Frames Along With Brake Riggingaccessories Of Wdm2/ Wdm3a (Us & Ur) Qty.= 10.366 Mt (02 Nos Bogie Frame){ Unit Weight Of Bogie Frame With Rigging Accessories Approx. = 4. 330 + 0. 853 = 5.183 Mt} (5.183
Limitted
Indian
Punjab
Ludhiana
08-04-2024

Tender Details

Auction Sale Of (I). Scrap Of Condemned Casted Bogie Frames Along With Brake Riggingaccessories Of Wdm2/ Wdm3a (Us & Ur) Qty.= 10.366 Mt (02 Nos Bogie Frame){ Unit Weight Of Bogie Frame With Rigging Accessories Approx. = 4. 330 + 0. 853 = 5.183 Mt} (5.183 X 02 Bogies = 10. 366 Mt) Divn. Lot No. Ldh/ Bogie Frames /Condemnation = 05. Sr. Dme/Dsl/Ldh Letter No. Dsl/Ldh/Tech/G- 63 B Dated 07-02-2024.Loc:- Casted Bogie Frame Lying At Dsl Shed Ldh (Near Load Box Test) Bogie Frame Number:- [1] . Clw-260 [2]. 2561. List Of Excluded Items Fitted In One Bogie Is As Under Will Be Taken Back :-1.Traction Motor Assembly=03 Nos, 2. Axle With Wheel Set =03 Nos, 3. Axle Box Assembly With Bearing = 06 Nos, 4. Equalising Beam Large = 04 Nos, 5. Equalising Beam Small= 04 Nos, 6. Stay Plates With Bolts = 06 Nos, 7. Coil Spring Inner = 08 Nos, 8. Coil Spring Outer = 08 Nos, 9. Spring Seats With Equalising Beam Safety Clamp = 04 Nos, 10. Gear Case Assembly With Bolt= 03 Nos, 11. Ant-Vibration Pad Set(Happy Pad)= 08 Nos, 12. Snubber Assembly=04 Nos, 13. Node Pad With Pins = 03 Nos, 14. Brake Cylinder Piston = 04 Nos, 15. Tie Bolt(Equalising Beam) Set With Cotter = 04 Nos, 16. Sand Box Assembly=02 Nos, 17. Suspension Bearing Set In Conventional Bogie = 06 Nos. Special Conditions: - 1. Cutting Will Be Allowed For Loading Purposes In Shed Premises. The Staff Of Contactor Will Be Allowed In Shed Premises From 9.00 To 17.00 Hrs For The Work Of Cutting With Proper I. D. Card. The Staff Will Not Be Allowed To Stay In Shed Premises After Working Hours. 2. Loading To Be Done By Purchaser. 3. Bogie Frame Will Be Handed Over To Purchaser On As Is Where Is Basis. 4. Cb Office Letter Of Lbr 03-04- 19 Proposal For Condemnation Of Bogie Frame Approved By Cwm/Cb. 5. As Per List Attached, The Excluded Items Will Be Taken Back From Each Bogie Frame From Purchaser If Any. 6. Bogie May Be Sold As In Weight Basis. Note- Instrucion Of Sr.Dme/Dsl/Ldh Should Be Followed By Purchaser While Doing Cutting & Dismentaling & Loading Of Material.

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail