|
| 1 | M&L for servicing, repair and replacement ofunserviceable parts at E/M yard including opening offan body of any type make & model cleaning, separating serviceable parts for reuse / refixsame after repairing andreplacing defecive parts witth new one of certain minor spares and consumables like MS screws, 2 way connector, rubber/ reel, insulator,condenser holder, ms nuts bolts, washers, grease is deemed to be included in the quoated rate ) reassembling, greasing completeall as specified and directed for the following:-Note: ( major spare parts required against repaires will be measure & paid seprately under relevent items of sch A) |
| 2 | Ceiling Fan 1200mm Sweep of any make or model |
| 3 | Ceiling Fan 1400mm Sweep of any make or model |
| 4 | Wall / Cabin Fan 400 / 450mm Sweep of any make or model |
| 5 | Exhaust Fan 250/ 300mm Sweep of any make or model |
| 6 | Exhaust Fan 380mm Sweep of any make or model |
| 7 | Exhaust Fan 450mm Sweep of any make or model |
| 8 | Pedestal Fan 400 / 450mm Sweep of any make or model |
| 9 | Air Circulator Fan 600mm Sweep of any make or model |
| 10 | M & L for rewinding the fans of any make, any model, from a reputed workshop, removing the burnt winding, cleaning slots, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc, replacement of body screws, testing and commissioning on full load for 4 hrs continuous running all as directed for the following:- |
| 11 | Ceiling Fan 1200mm Sweep of any make or model |
| 12 | Ceiling Fan 1400mm Sweep of any make or model |
| 13 | Wall / Cabin Fan 400 / 450mm Sweep of any make or model |
| 14 | Exhaust fresh air fan 200/250 mm Sweep of any make or model |
| 15 | Exhaust Fan 300/350 mm Sweep of any make or model |
| 16 | Exhaust Fan 450mm Sweep of any make or model |
| 17 | Pedestal Fan 400 / 450mm Sweep of any make or model |
| 18 | Air Circulator Fan 600mm Sweep of any make or model |
| 19 | M & L for Preparing the surface, removethe existing painting by scraping, cleaning, filling the cavities and applying 2 coats of spray paint of synthetic enamel white / Brown paint over a coat of red oxide primer, including writing the MES Nos. all as directed for the following:- |
| 20 | Ceiling Fan 1200mm Sweep of any make or model |
| 21 | Ceiling Fan 1400mm Sweep of any make or model |
| 22 | Wall / Cabin Fan 400 / 450mm Sweep of any make or model |
| 23 | Exhaust Fan 300mm Sweep of any make or model |
| 24 | Exhaust Fan 380mm Sweep of any make or model |
| 25 | Exhaust Fan 450mm Sweep of any make or model |
| 26 | Pedestal Fan 400 / 450mm Sweep of any make or model |
| 27 | Air Circulator Fan 600mm Sweep of any make or model |
| 28 | S & F, Condensor / Capacitor, 240V, AC, suitable for fans all as directed for the following:- |
| 29 | 2.5 mfd |
| 30 | 3.15 mfd |
| 31 | 4.0 mfd |
| 32 | S & F, Ball bearing made out of high carbon steel, equivalent to the original, 6201/6202/6203/6204/NF-8/6205, suitable for any type, any make, any size fans complete all as specified and directed |
| 33 | S& F, GM Bush bearing, equivalent to the original, X-I, X-2, X-3, X-4, suitable for any type, any make, any size, fan complete all as specified and directed |
| 34 | S & F, Nickel plated mild steel clamps,rubber reel insulator Nuts, Bolts, Washers and split pin suitable for ceiling fansany type, any make, any size complete all as specified and directed |
| 35 | S & F, Down rod, suitably threaded and holed, made out of 15mmdia GI tubes, duly painted, 300mm long, suitable for ceiling fansany type, any make, any size complete all as specified and directed |
| 36 | All as per above but 600mm long |
| 37 | All as per above but 900mm long |
| 38 | S & F, Fan canopy with tightening screw/check nut, made out of PVC, suitable for ceiling fansany type, any make, any size complete all as specified and directed. |
| 39 | Clutchfor ceiling fan made out of GI heavy both end threaded as per sample suitable for 1200 /1400 mm sweep ceiling fancomplete all as specified and directed |
| 40 | Metal bottom cover of ceiling fan complete with bearing holder suitable for any type,any make or model complete all as specified and directed |
| 41 | All as above but top cover of ceiling fans complete all as specified and directed |
| 42 | Magnetic ring of ceiling fans for any type,any make or model complete all as specified and directed |
| 43 | S &F, Fan blades made out of 1.2mm thick Aluminium alloy and MS screws duly balanced & spray painted with White or Brown colour, Set of three, suitable for ceiling fans of any type, any make all as directed for the following:- |
| 44 | 1200mm Sweep |
| 45 | 1400mm Sweep |
| 46 | S &F, Fan blades made out of Acrylic / PVC alloy and MS screws duly balance suitable for 450mm wall / cabin fans of any type, any make, complete all as specified and directed |
| 47 | S & F, Fan blades made out of thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for Exhaust fans of any type, any make complete all as specified and directedfor the following:- |
| 48 | 300mm Sweep |
| 49 | 380mm Sweep |
| 50 | 450mm Sweep |
| 51 | S & F, Fan blades made out of Acrylic / PVC alloy and MS screws duly balance suitable for 400 / 450mm Pedestal fan of any type, any make, complete all as specified and directed |
| 52 | S & F, Fan blades made out of thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for 600mm Air Circulator fan of any type, any make complete all as specified and directed |
| 53 | S & F, 1100V grade PVC sheathed PVCinsulated flexible 3 core cable with multistranded copper conductor of size 1.5Sqmm, ISI Marked complete all as specified and directed |
| 54 | Supply & fixing in repair base plate for wall mounting fan any type/ size as per existing size of fan complete all as specified and directed |
| 55 | Supply & fixing in repair regulator for wall mounting fan any type/ size as per existing size of fan complete all as specified and directed |
| 56 | Supply & fixing in repair protection cover (jali) complete front and backfor wall mounting fan any type/ size as per existing size of fan complete all as specified and directed |
| 57 | M&L for making hole in wall, Grouting 4Nos Rag Bolts of size 125mm long x 12mmm dia in PCC on wall including suitable nuts and washers for fixing / hanging geysers, complete all as specified and directed |
| 58 | S & F PVC sheathed,PVC insulated multi stranded copper conductor, 3 core, flexible cable, 1100 V grade, 2.5Sqmm, AC, connecting complete all as specified and directed |
| 59 | S & F in repair for plug top 3 pin 15 Amps capacity complete all as specified and directed . |
| 60 | Supply onlyZebra fastner of size 12x100 mm complete all asspecified and directed . |
| 61 | S & F in repair modular Power Unit 20A, 3pin, AC, 240V ISI Marked incl FRP Box and 01 No\"s 16 Amps MCB SP complete all as specified and directed |
| 62 | S & F in repair SPN metallic enclosure with a two pin and earth plug and socket with one MCB SP 20 Amps complete all as specified and directed |
| 63 | S & F in repairs, Wall fan, 450mm sweep, AC,230V incl T/D old u/s one and depositing to MES store complete all as specified and directed. |
| 64 | S & F in reapirs, PVC fresh air fan, 250mm sweep with louvers, AC, 230V incl T/D old u/s one and depositing to MES complete all as specified and directed. |
| 65 | All as per Srl item No 32 here-in-before but 200mm sweep |
| 66 | M & L for making opening in the wall for fixing exhaust fan upto 250mm /200mm, including plastering work & making good the surfaces complete all as specified and directed |
| 67 | S & F Ceiling Fan 1200mm Sweepcomplete all as specified and directed |
| 68 | S & F Ceiling Fan50 watt 1400mm Sweepcomplete all as specified and directed |
| 69 | Supply and fixing in replacement of new compressor hermetically sealed type equipped with suitable rated capacity electric motor and over load protection making all existing connection including testing complete all as directed for 1.5 ton Window type/split Air conditioners complete all as specified and directed |
| 70 | All as per Srl item No 37 here-in-before but of capacity 2 ton. |
| 71 | All as per Srl item No 37 here-in-before but Invertor type. |
| 72 | M&L for Gas refrigerant R12/R22/R410A/R 134 in the sealed system of window/Split type Air conditioners 1.5/2 Ton capacity after checking leakage / pressure vacumising flushing the sealed unit including replacement of filter drier and capillary tube complete all as specified and directed |
| 73 | Taking down of window/Split AC 1.5/2.0 any /any modelton capacity and cleaning / servicing of AC, overhauling of blower motor replacement of worn out parts, preparation of body for painting one coat of black paint inner side and one coat synthatic enameled paint on the outer cover of AC and making of SM/MES No and testing of full load of summer season and reinstallation at site complete all as specified and directed. Note : Worn out parts shall be measured & paid seperately. |
| 74 | S&F in repairsplit / window AC of capacity 1.5 / 2 TR (a) Blower motor 1/6 HP with base / rubber bush complete Make AUE / GE Suitable for any make / model complete all as specified and directed |
| 75 | All as per Srl item No 42 here-in-before but Condensor fan motor 1/5 HP |
| 76 | All as per Srl item No 42 here-in-before but Condensor fan metallic blade. |
| 77 | All as per Srl item No 42 here-in-before but Drum type blower fan PVC type. |
| 78 | All as per Srl item No 42 here-in-before but Running capacitor 36 mfd. |
| 79 | All as per Srl item No 42 here-in-before but Starting capacitor 100 to 120 mfd |
| 80 | All as per Srl item No 42 here-in-before but Selector switch. Any make / any model |
| 81 | All as per Srl item No 42 here-in-before but Thermostate |
| 82 | All as per Srl item No 42 here-in-before but with plastic / juite Air filter. |
| 83 | All as per Srl item No 42 here-in-before but cooling coil assembly suitable for any make / any model as per site requirement |
| 84 | All as per Srl item No 42 here-in-before but Condensor coil assembly. |
| 85 | All as per Srl item No 42 here-in-before but Wiring kit. |
| 86 | All as per Srl item No 42 here-in-before but Front grill plastic type as per sample |
| 87 | All as per Srl item No 42 here-in-before but Capacitor 6 mfd. |
| 88 | All as per Srl item No 42 here-in-before but Blower motor 1/3 HP for indoor unit split type AC suitable for any Make / any model as per site requirement. |
| 89 | All as per Srl item No 42 here-in-before but Running capacitor 45 mfd. |
| 90 | All as per Srl item No 42 here-in-before but Blower fan 3 Ft long suitable for split AC USHA SHRIRAM/LG (as per sample) complete all as specified and directed |
| 91 | Supply and fix in replacement of electronic circuit plate (PCB) including necessary repairs to electronic circuit for remote operation suitable for 1.5 / 2.0 ton split type AC for LG / USHA SRIRAM. |
| 92 | Supply and fix in replacement of remote suitable for 1.5 / 2 ton split type AC operation for LG/Usha Sriram complete all as specified and directed |
| 93 | Supply and fix in replacement Air break contactor relay 6.2 Amps, 415 Volts AC suitable for split type AC complete all as specified and directed |
| 94 | Labour for shifting of split AC 1.5 , 2 ton capacity one place to another places as required at site and disconnecting of copper tubing, PVC pipe connection and installation of New location indoor/outdoor unit complete with Gas charging tested on full load on summer season complete all as specified and directed |
| 95 | M&L for replacement with new indoor unit of capacity 1.5 / 2 ton with cooling coil, blower motor complete with all accessories complete all as specified and directed |
| 96 | M&L for replacement with new outdoorunit of capacity 1.5 / 2 ton with condensor coil, blower motor 1/6 HP , single phase, including fixing in old serviceable compressor and connection of copper tubing suction / discharge complete all as specified and directed |
| 97 | Supply and fixing in replacement of new compressor hermetically sealed type type compressor suitable for 300 to 320 ltrs capacity refrigerator with suitable rated capacity electric motor and shall be equipped with relay / over load protection 230 Volt, 50 Hz, including testing for any make or model complete all as specified and directed |
| 98 | All as Srl item No 65 here-in-before but 165 ltrs to 260 ltrs. |
| 99 | M&L for filling/charging Gas refrigerant R22/R134/R438Ain the sealed system of refrigerator of any make /capacity after checking leakage / pressure vacumising flushing the sealed unit including replacement of filter drier and capillary tube complete all as specified and directed |
| 100 | Supply and fixing starting relay with OLP kit suitable for any make Suitable for any / model refrigerator complete with testing and commissioning complete all as specified and directed |
| 101 | Supply and fix in replacement of thermostat switch suitable for any model / model complete all as specified and directed |
| 102 | Supply and fixing electricLamp 15 watt 230 volt AC thread / pin type suitable for any make / capacity of refrigerator complete all as specified and directed |
| 103 | M&L for replacement of lamp holder suitable for any make/capacity model of refrigerator complete all as specified and directed |
| 104 | M&L for replacement of door switch push type suitable for any make/capacity model of refrigerator complete all as specified and directed |
| 105 | S&F Door handle suitable for Refrigerator any make / model / any cap of any complete all as specified and directed |
| 106 | S&F PVC bottle guard suitable for 165 to 310 ltr Refrigerator suitable for any make /model/any capacity complete all as specified and directed |
| 107 | Supply and fixing in replacement of condensing coil suitable for any make / model / refrigerator for the following capacity ( As per Sample ) :- (a) 300 / 310 ltr complete all as specified and directed |
| 108 | All as per Srl item No 75 here-in-before but 165 ltrs to 210 ltrs. |
| 109 | Supply and fixing in replacement chilled tray plastic for suitable for any make / any model / any capacity refrigerator complete all as specified and directed |
| 110 | S&F in replacement of PVC gaskit magnetic type for suitable for any make / any model / any capacity refrigerator complete all as specified and directed |
| 111 | S&F in replacement of cooling fan motor with metallic blade for any cap / any type complete all as specified and directed |
| 112 | Supply and fixing Ice cube tray plastic complete all as specified and directed. |
| 113 | Supply and fixing vegetable tray plastic suitable for any make/any model/any capacity complete all as specified and directed |
| 114 | Supply and fixing toughened glass partition for any cap / any make / any model complete all as specified and directed |
| 115 | Supply and fixing timer switch for suitable for any make / any model /any size complete all as specified and directed |
| 116 | M&L for painting to refrigerator 310/300/316/165 ltrs by scraping the old paint and applying one coat of red oxide as primer and applying two coats of synthatic enamel paint of approved colour including writing SM No complete all as specified and directed |
| 117 | Supply and fixing in replacement of new compressor hermetically sealed type with suitable rated capacity electric motor and shall be equipped with over load and relay, 230Volt, 50 Hz, includind testing single suitable for water cooler 40/80 ltr capacity complete all as specified and directed |
| 118 | All as per Srl item No 85 here-in-before but 60/120 ltr capacity. |
| 119 | All as per Srl item No 85 here-in-before but 150 ltr capacity. |
| 120 | M&L cleaning of water cooler tank from inner side with soda / Acid and de-scaling of water cooler to remove by brushing and soldering the leaking places and prepare the leak proof and complete all as specified and directed |
| 121 | M&L for painting to water cooler of any capacity by applying two coats of synthetic enamel paint over a coat of red oxide primer of approved colour by spray machine after preparation of old surface and writing machine No with black paint complete all as specified and directed |
| 122 | Dismantling the blower motor of water cooler 1/32 HP capacity, 230 volts single phase and taking out burnt out copper winding wire from motor and M&L for rewinding the electric motor with super enameled copper winding wire of same size and gauge including insulation material, varnish and bush, shaft and refixing the motor complete & testing on full load including replacement of unserviceable spares complete all as specified and directed |
| 123 | All as per Srl item No 90 here-in-before but 1/6HP for 150 ltr water cooler / AC |
| 124 | S&F in replacement of starting relay No. 522 / 1622 for water coolercomplete all as specified and directed |
| 125 | S&F in replacement of starting capacitor 40-60 mfd 220 Volts complete all as specified and directed |
| 126 | All as per Srl item No 93 here-in-before but for capacitor 60-80 mfd 220 Volts. |
| 127 | All as per Srl item No 93 here-in-before but for Running capacitor 15 mfd, 415 volts. |
| 128 | All as per Srl item No 93 here-in-before but forcapacitor 10 mfd, 415 volts . |
| 129 | All as per Srl item No 93 here-in-before but forcapacitor 36 mfd, 415 volts . |
| 130 | Supply and fixing in replacement of PVC float valve with rod and plastic ball suitable for 1/2\" bore of water cooler complete all as specified and directed |
| 131 | Supply and fixing in replacement of LDPE 25 mm dia flexible pipe heavy duty with suitable clamp complete all as specified and directed |
| 132 | Supply and fixing PVC pipe flexible type 32 mm dia for waste water draining complete all as specified and directed |
| 133 | Supply and fixing in replacementover load protector (OLP) for water cooler of any capacity complete all as specified and directed |
| 134 | Supply and fixing in replacementself closing push cock 15mm bore chromium plated brass heavy duty long body inner threadedcomplete all as specified and directed |
| 135 | Supply and fixing in replacement aluminium blade for blower motor of water cooler 80 ltrs to 150 ltrs complete all as specified and directed |
| 136 | Supply and fixing in replacementopen type relay : CAJ-2612 |
| 137 | All as per Srl item No 104 here-in-before but CAJ-3612 |
| 138 | Supply and fixing in replacementthermostat of water cooler of any type make INDFOSS complete all as specified and directed |
| 139 | Supply and fixing in replacementblower motor 1/32 HP 230 volt suitable for water cooler complete with base frame/and rubber bush make AUE/GE for 60 to 150 ltrs complete all as specified and directed |
| 140 | Supply and fixing in replacementdrip tray made of stainless steel complete suitable for water cooler any make of 40 to 150 ltr capacity complete all as specified and directed |
| 141 | Supply and fix water tank gasket for water cooler 40/80 ltr cap complete all as specified and directed |
| 142 | S&F wiring kit complete for water cooler complete all as specified and directed |
| 143 | Supply and fix in replacement of new compressor hermetically sealed with suitable rated capacity electric motor and shall be equipped with over load and relay, 230 volt , 50 Hz , including testing suitable for Deep freezer of capacity 200 / 300 Ltrs complete all as specified and directed |
| 144 | All as per Srl item No 111 here-in-before but 400 / 500ltrs capacity complete all as specified and directed |
| 145 | M&L for Filling gas refrigerent R12/R22/R-404A in the sealed system of Deep Freezer any make and capacity after checking the leakage / pressure vacuminising flushing the sealed system including replacement of capacity Tube, copper pipe for jointing, Gas filter complete all as specified and directed |
| 146 | Supply & Fixing Voltage Stabilizer for 2 Ton AC Make : V-Guard VG 500 or equivalent to Microtek complete all as specified and directed |
| 147 | Supply & Fixing Voltage Stabilizer for 1.5 Ton AC Make : V-Guard VG 400 or equivalent to Microtekcomplete all as specified and directed |
| 148 | Supply and fixing in replacement starting relay as per sample complete all as specified and directed |
| 149 | Supply and fixing in replacement of main transformer 5 KVA capacity complete all as specified and directed |
| 150 | All as per Srl item No 117 here-in-before but 2 / 3 / 4 KVA complete all as specified and directed |
| 151 | All as per Srl item No 117 here-in-before but 0.5 / 1KVA |
| 152 | WATER PURIFIER : Taking out of water purifier (Aqua guard) or any other make / model and servicing , repair / replacement of spare parts of water puriferinstalled at cantt area. (Spare parts will be measure and paid separetelly relevant items) |
| 153 | Supply only pre filter candle (as per sample) complete all as specified and directed |
| 154 | Supply only Activated Carbon complete all as specified and directed |
| 155 | Supply only PCB circuit electric plate complete all as specified and directed |
| 156 | Supply only ultra violet lamp unit complete all as specified and directed |
| 157 | Supply and fixing in replacement of PVC pipe nylon braided heavy duty suitable for water partition inletconnection and as required at site complete all as specified and directed |
| 158 | Supply and fixing in replacement of chromomum plate tee 15/8 mm for existing GI pipe connection complete all as specified and directed |
| 159 | DESERT COOLER: Servicing / Disconnection desert cooler fan from desert cooler for repairing including cleaning,greasing,oiling , welding or M\"seal at leaking place and refixing back after repair in original position including replacement of unserviceable spares. ( parts to be replaced will be measured and paid separately under elevant items) |
| 160 | S&F in repair desert cooler fan motor any type/any model/make complete all as specified and directed |
| 161 | Supply and fixing in replacement of capacitor 4 mfd for kit fan / Exhaust fan complete all as specified and directed |
| 162 | Supply and fixing in replacement of PVC water distributer 3 way / 4 way for desert cooler of any size / capacity complete all as specified and directed |
| 163 | Supply and fixing in replacement of PVC elbow suitable for desert cooler of any size / capacity complete all as specified and directed |
| 164 | Supply and fixing in replacement of PVC flexible pipe 15 mm dia suitable for water distribution system of Desert cooler of any size / capacity complete all as specified and directed |
| 165 | Supply and fixing in replacement of front grill plastic type desert cooler with necessary nut,bolts, and washers etc, complete all as specified and directed |
| 166 | Supply and fixing in replacement of Vertical lifting pumps 1/70 HP, 230 Volts single phase complete all as specified and directed |
| 167 | Supply and fixing in replacement of Sumersible pump suitable for desert cooler/ industrial cooler complete upto 4000 cum complete all as specified and directed |
| 168 | Supply and fixing Sumersible pump suitable for cooler of any type but capacity 6000 cum complete all as specified and directed |
| 169 | Supply and fixing in replacement of wood wool padding of desert cooler of suitable size in wire net complete weight not less than 450 gms complete all as specified and directed |
| 170 | Supply and fixing in replacement of wood wool padding of Industrial type cooler of suitable size in wire net complete weight not less than 450 gms complete all as specified and directed |
| 171 | Supply and fixing in replacement side shutter (set of three) for desert cooler of as per sample 22 gauge PGI sheets grill type complete all as specified and directed |
| 172 | Supply & installnewdesert cooler (steel body) 4000 cum per hour,electric driven, 1 phase, 240 volts, AC heavy duty long body exhaust fan motor with , submersible water pump, ISI marked 3 core 1.50 sqmm pvc copper cable of minium 2 mtr long with plug top and control switches etc complete all as specified and directed |
| 173 | Supply and fix fan motor copper wounded suitable for desert cooler 230 volts, 50 Hz, single phase AC supply of capacity 4000 Cum complete all as specified and directed |
| 174 | Supply and fix fan motor copper wounded suitable for Industrial desert cooler 230 volts, 50 Hz, single phase AC supply of capacity6000 Cum complete all as specified and directed |
| 175 | Supply and fix fan motor of Industrial cooler 3 phase, 415 V ,6000 Cum complete all as specified and directed |
| 176 | Supply and fix 3 core 1.5 sqmm copper flexible wire complete all as specified and directed |
| 177 | Supply and fixing in replacement of Mettalic fan blade for desert cooler motor 4000 Cum complete all as specified and directed |
| 178 | Supply and fixing in replacement of Mettalic fan blade for Industrial desert cooler motor 6000 Cum complete all as specified and directed |
| 179 | Supply and fixing in replacement of 3 pin plug top 5 Amps complete all as specified and directed |
