Supply Of Agriculture Machinery. (Item Code - M-27) Annual Rate Contract For The Supply Of Agriculture Machinery. , Wheat Thresher (20” Midium Size) Power Operated Wheat Thrashers Conforming To Is: 9020-2002, Is:9019-1979,Is: 9020-1979 & 9129-1979. Detailed Specifications Of Wheat Threshers Of Size Mentioned Above. Wheat Thresher Of Size 20X10,Main Frame (Lxwxh) 31X23x31, Iron Of 50X50x5mm, One 40X40x5 Mm. Main Shaft. 38Mm M.S. Round. Drum: 20Dia X 10 Width (14 Gauge Sheet). Roter: 9.5 Dia With 3 Flats Blade & 3 Flats Threshing Bolts Blower:19X3/4 Dia X 7 Width With 4 Blades (16 Guage Sheet). Sievs: Size 35X18 1/2 Angle Iron 25X25x3mm. Transportation:4 Wheels Of 5 Dia Plasticalso With Rings For Lifting The Thresher From The Place To Another.Bearing Ucp 207,Ucp 205,6204. Feeding Chute Shall Be Strictly In Accordance Withis:9020-2002, Is: 9129-1979. Average Weight : Weight Of Fly Wheel 14 Kg. Total Weight 157 Kg. + -2%Variation.Certification;Mark For All Sizes: Each Thresher Shall Be Conforming To Is:9020-2002,Is: 9019-1979, 9020-1979 & 9120-1979. Air Flow For :Provision Should Be Provided To Adjust The Air, Flow So As To Avoid The Grain Flow In The Straw. Threshing Bolt In All Sizes. Should Be Properly Hardened And Tempered. Marking: Shall Be Marked With Manufacturers Name Registered Trade Mark Code And Batch No. Of Size 20. (2Hp, Weight 157 Kg.) , Wheat Thresher (Multi Crop16” Mini Size) Power Operated Wheat Thrashers Conforming To Is: 9020-2002, Is: 9019-1979, Is: 9020-1979 & 9129-1979. Detailed Specifications Of Wheat Threshers Of Size Mentioned Above. Wheat Thresher Of Size 16X9,Main Frame (Lxwxh) 32X19X28, Iron Of 50X50x5mm, One 40X40x5 Mm. Main Shaft. 38Mm M.S. Round. Drum: 16Dia X 9 Width (14 Gauge Sheet). Roter: 4 Dia Ms Pipe Threshing Bolts Of Stud 5X5 .5” Three Lines & Three Lines Blades Size 75 Mm, Blower: 16 Dia X 7 Width With 4 Blades (16 Guage Sheet). Sievs: Size 28X13.5 Angle Iron 25X25x3mm, Transportation:4 Wheels Of 5 Dia Plasticalso With Rings For Lifting The Thresher From The Place To Another.Bearing Ucp 207,6205,6206,6204. Feeding Chute Shall Be Strictly In Accordance Withis: 9020-2002, Is: 9129-1979. Average Weight: Weight Of Fly Wheel 14 Kg. Total Weight 125 Kg. + -2%Variation.Certification; Mark For All Sizes: Each Thresher Shall Be Conforming To Is:9020-2002,Is: 9019-1979, 9020-1979 & 9120-1979. Air Flow For :Provision Should Be Provided To Adjust The Air, Flow So As To Avoid The Grain Flow In The Straw. Threshing Bolt In All Sizes. Should Be Properly Hardened And Tempered. Marking : Shall Be Marked With Manufacturers Name Registered Trade Mark Code And Batch No. Of Size 16. , Power Operated Wheat Thrashers Power Operated Wheat Thrashers Conforming To Is:9020-2002, Is:9019-1979,Is: 9020-1979 & 9129-1979. Detailed Specifications Of Wheat Threshers Of Size Mentioned Above. Wheat Thresher Of Size 12X10,Main Frame (Lxwxh) 30X15X26, Iron40x40x5 Mm. Main Shaft. 32Mm M.S. Round. Drum: 12Dia X 10 Width (14 Gauge Sheet). Roter: 3Dia Ms Pipethreshing Stud 5X4 Of Studthree Lines& Three Lines Blades Size 50 Mm ,Blower:12 Dia X 4.5 Width With 4 Blades (16 Guage Sheet). Sievs: Size 24X13.5 Angle Iron 25X25x3mm, Transportation:4 Wheels Of 5 Dia Plasticalso With Rings For Lifting The Thresher From The Place To Another.Bearing 6205,6206 Feeding Chute Shall Be Strictly In Accordance Withis:9020-2002, Is: 9129-1979. Average Weight : Weight Of Fly Wheel11 Dia Wt 7Kg. Total Weight 85 Kg. + -2%Variation.Certification;Mark For All Sizes: Each Thresher Shall Be Conforming To Is:9020-2002,Is: 9019-1979, 9020-1979 & 9120-1979. Air Flow For :Provision Should Be Provided To Adjust The Air, Flow So As To Avoid The Grain Flow In The Straw. Threshing Bolt In All Sizes. Should Be Properly Hardened And Tempered. Marking : Shall Be Marked With Manufacturers Name Registered Trade Mark Code And Batch No. Of Size 12. , Power Operated Wheat Thrashers Power Operated Wheat Thrashers Conforming To Is:9020-2002, Is:9019-1979 Is:9020-1979 And Is:9129-1979 Wheat Thresher Of Size 24X12 Frame: Size Lxwxh =44X36x52frame Material Iron 50X50x5mm. Sieve Suport:Made Of Angle Iron Of 35X35x5mm. Main Shaft. 50Mm M.S. Round. Drum; 24Dia 12 Width (14 Gauge Sheet) Roter. 12 Dia With 6 Flats- 3 Flate Blade 50 Mm, Threshing Bolt 5X5.5 . Iron Sieve Angle 25X25x3mm With Screen Size 9.5 No. And 12 No. And Should Have Adjustment Facilitiesfitted With Sterting Mech. Bearing Used: 6305, 6204, 6310 & 6206. Feeding Chute; Shall Be Strictly In Accordance With Is:9020-2002, Is:9129-1979. Average Weight:Weight Of Fly Wheel 28 Kg. - Each Thresher Be Conforming To Is:9020-2002, Is: 9019-1979, 9020-1979 & 9120-1979. Air Flow For: Provision Should Be Provided To Adjust The Air, Flow So As To Avoid The Arain Flow In The Straw. Threshing Bolt In All Sizes: Should Be Properly Hardened And Tempered. Marking: Shall Be Marked With Manufacturers Name Registered Trade Mark Code And Batch No. Of Size 24 , Power Operated Wheat Thrashers Power Operated Wheat Thrashers Conforming To Is:9020-2002, Is:9019-1979 Is:9020-1979 And Is:9129-1979 Wheat Thresher Of Size27X14 Frame: Lxwxh-58X38x54made Of Angle Iron Of 50X50x5mm Size. Angle Iron Of 40X40x5mm, Angle Iron 50X50x5mm. Sieve Suport:Made Of Angle Iron Of 40X40x5mm. Main Shaft. 50Mm M.S. Round. Drum; 27Dia 14 Width (14 Gauge Sheet) Blower: 27Dia X 8 Width With 4Blades (16 Guage Sheets).Sieves Angle Iron 25X25x3mm With Screen Size 9.5 No. And 12 No. And Should Have Adjustment Facilities. Bearing Used:6206, 6310, 6204, 6305 Feeding Chute; Shall Be Strictly In Accordance With Is:9020-2002, Is:9129-1979. Average Weight: Weight Of Fly Wheel 29Kg. Marking Shall Be Marked With Manufacturers Name Registered Trade Mark Code And Batch No. Of Size 27. Certification Mark For All Sizes: Each Thresher Shall Be Conforming To Is:9020-2002, Is: 9019-1979, 9020-1979 & 9120-1979. Air Flow For: Provision Should Be Provided To Adjust The Air, Flow So As To Avoid The Arain Flow In The Straw. Threshing Bolt In All Sizes: Should Be Properly Hardened And Tempered. , Power Operated Wheat Thrashers Power Operated Wheat Thrashers Conforming Tois:9020-2002, Is:9019-1979 Is:9020-1979 And Is:9129-1979 Wheat Thresher Of Size 30X14 Frame:Lxwxh =58X43x54 Material Used Angle Iron Of 50X50x5mm Iron Of 40X40x5mm. Iron 50X50x5mm.Sieve Suport: Made Of Angle Iron Of 40X40x5mm Size. Main Shaft: 50Mm M.S.Round. Drum: 30Dia 14Width (14 Gauge Sheet) Roter Blower: 30Diax8Width. 4 Blads(16Guage Sheet) Sievs: Size 20X35Angle Iron 35X35x5mm With Screen Size 9.5 No. And 12 No. And Should Have Adjustment Facilities.Bearing= 6206, 6310, 6204,& 6305 Feeding: Shall Be Strictly In Accordance With Is:9020-2002, Is:9129-1979. Average Weight: Total Weight 350Kg. +-2% Variation. Marking: Shall Be Marked With Manufacturers Name Registered Trade Mark Code And Batch No. Of Size 30. Each Thresher Shall Be Conforming To Is:9020-2002,Is: 9019-1979, 9020-1979, 9120-1979 Failing With Tender Shall Not Be Considered. Air Flow For: Provision Should Be Provided To Adjust The Air, Flow So As To Avoid The Grain Flow In The Straw. Threshing Bolt In All Sizes: Should Be Properly Hardened And Tempered In All Sizes. , Power Operated Wheat Thrashers Power Operated Wheat Thrashers Conforming To Is:9020-2002, Is:9020-2002, Is:9019-1979,Is:9020-1979 And Is:9129-1979 Of Size 36 Dedtailed Specifications Of Wheat Thresher Of Size Mentioned Above. Particulars: Wheat Thresher Of Size 36X24. Frame: Lxwxh =87X42x64 Iron 65X65x6mmangle Iron Of 50X50x5mm Size, 90X90x5. Main Shaft: 2.5 Diadrum: 36Dia 24 Dia With 14 Gauge Sheet Roter Blower: 36Dia X 8.5 With 14 Guage Sheet - Sieve Angle Made 35X35x5 With Screen Size 9.5 And 12 Nos. And Should Be Adjustment Facilities.Bearing: 6312, 6310, 6204, 6207. Marking: Shall Be Marked With Manufacturers Name Registered Trade Mark Code And Batch No. Feeding: Shall Be Strictly In Accordance With Is:9020-2002, Is:9129-1979. Total Weight 784Kg. +-2%Variation Certification: Mark For All Sizes: Each Thresher Shall Be Conforming To Is:9020-2002, Is:9020-2002, Is: 9019-1979, 9020-1979 & 9120-1979. Air Flow For: Provision Should Be Provided To Adjust The Air, Flow So As To Avoid The Grain Flow In The Straw. Threshing Bolt In All Sizes:Should Be Properly Hardened And Tempered. , Power Operated Wheat Thrashers Power Operated Maize Thrashers Conforming To Is:9020-2002, Is:9019-1979,Is: 9020-1979 & 9129-1979. Detailed Specifications Of Maizethreshers Of Size Mentioned Above. Maize Thresher Of Size 12X10,Main Frame (Lxwxh) 29X30X47, Iron 40X40x5 Mm, 25X25 Mm. Main Shaft. 32Mm M.S. Round. Drum: 10Dia X12 Width (14 Gauge Sheet). Roter: 3.5 Dia Making Sheet Fitted With Sq Saria 20 X 35Mm -12 Pcs4lines Transportation:4 Wheels Of 5 Dia Plasticalso With Rings For Lifting The Thresher From The Place To Another.Bearing6206-4 Pcs. , Power Operated Wheat Thrashers Power Operated Maize Thrashers Conforming To Is:9020-2002, Is:9019-1979,Is: 9020-1979 & 9129-1979. Detailed Specifications Of Maizethreshers Of Size Mentioned Above. Maize Thresher Of Size 20X10,Main Frame (Lxwxh) 40X28X47, Iron 40X40x5 Mm, 25X25 Mm. Main Shaft. 32 Mm M.S. Round. Drum: 10Dia X20 Width (14 Gauge Sheet). Roter: 3.5 Dia Making Sheet Fitted With Sq Saria 20 X 35Mm -20 Pcs4lines Transportation:4 Wheels Of 5 Dia Plasticalso With Rings For Lifting The Thresher From The Place To Another.Bearing6206-4 Pcs. , Power Operated Maize Sheller Heavy Duty Power Operated Maize Sheller Size 3. Other Specificationslxwxh=62X41x60.All Body Made Of M.S. Sheets 1.6Mm (16 Gauge) Angles 40X40x5mm. 2. Rotor Made Of M.S. Sheets 14 Gauge X Square 5/8. 3. Parnala Made Of M.S.Sheets 18 Guage. 4. Shafts Of 50 Mm.Dia Fitted With Cast Iron Pulleys. , Heavy Duty Tractor Driven Maize Sheller Power Operated Heavy Duty Tractor Driven Maize Sheller (Size 3 Feet) Specification:- Maize Sheller Shall Be Made Of 18 Diameter X 3 Feet Lonf Drum Made Of Heavy Duty Mild Steel Sheet Driven By 3 Nos.V-Belts And Supported By Capable Of Running At 650 Rpm. 10 Diameter Fan Drum Shall Be 24 Long Made Of 14 Gauge Ms Sheet. Fan Impellor Having Ms Shaft Size 1.5.Main Drive 2 Diametermade Of Mild Steel Suitable To Couple With A Drive Unit .All V-Belt Drives Are Adjustable For Maintaining Proper Tension Of V Belts And Provided With Safety Guard. 14 Gauge Ms Sheet And Heavy Duty Ms Angle 40X40x5 Mm Size Shall Be Used For Main Structure And Body Of Maize Sheller With Angle Construction At Four Legs 36 Long And Main Drive Frame Support. Man Drive Frame And Lifting Arrangement Suitable To Link With Hydraulic Lift Of Tractor Shall Be Made Of Heavy Duty 50X50x5 Mm Ms Angle And Hooking Arrangement Made Of Flate 10X65 Mm And 5X60 Mm Ms Angle Box Fixed. Maize Sheller Shall Be Provided With 4 Nos. 7 Diameter Cast Iron Wheel Having 1 Bore Diameter For Its Mobility. , Motorized Paddy Thresher Motorized Paddy Thresher, Minimum Drum Size 3.5 Feet, Bearing With Housing And Pulley 04 Nos Belt Driven, Isi/ Reputed Brand , Minimum Weight Of Machine Without Motor>=85Kgs, Approx,Output Capacity 4.5-5 Qtls Per Hour. Motor Capacity 2 Hp Single Phase(Isi Mark), Rpm 1440, 100% Copper Winding, Double Capacitor, Volts 190-240. , Paddy 72 Drum Thresher Paddy 72 Drum Thresher Sizelxwxh=154X41x68 Rotor Flat Crushingh Bolt , Fly Wheel 32 Split, 28 Split, 35 Hp, Weight 150 Kg Main Shaft 63 Mmdia,Frame Channel Used 125X65x5 Mm Angle 50X50x5mm,65X65x6mm,,Bearing-6312,6310, Ucp-205, Ucp 207. The Paddy Thresher Suitable For 35 Hp & Above. , Paddy 60Drum Thresher Paddy 60Drum Thresher Size Lxwxh=129X41x68, Rotor Flat-50X10 Lcbearing 6312, 6310,Ucp 207,Channel 100X50x5mm Anlge 75X75x5,65X65x6, Wheel 28 Dia Split & 32 Dia Split,Belt -C-108 -3 Pcs.Paddy Thresher Suitable Below 35 Hp. , Harambha 32 Harambha 32 Drum Thresher Size Cutter Model 3 Tokka- Lxwxh= 161X63x64, Rotor Flat Threshing Bolt 6X7, Material Used- Channel 125X65x5mm,100X50x5mm,50X50x5mm,Wheel 32 Split, Weight Approximate- 1313 Kg.Main Shat Dia-63Mm, Sheet Used -2Mm,2.5Mm,1.6Mm Bearing 6312,6310,6207,6207 & 6305. The Harambha Cutter Model Suitable For 35 Hp & Above. , Maize Sheller (Mini) Power Operated Mini Maize Sheller (Side Inlet) With Detailed Specifications As Given Below: - Upper Frame Size 17”X13”; Lower Frame Size 19”X16.5” And 4 Legs 18” Long Each Made Of Mild Steel Angle 40X40x3mm; Drum (10” Dia) Made Of 16 Gauge Ms Sheet With Removable Top Cover; Rotor Made Of 14 Gauge Sheet With Dia 5” X 13” Long Having 14 Nos. 5/8” Square Bar Pieces 1.5” Long Welded On It; Main Shaft 32Mm Dia X 22” Long; Feeding Chute 5” Wide With 3” Walls X 7.5” Long Made From 16 Gauge Ms Sheet; Defection Hopper 14” X 13” X 12” Depth Made From 16 Gauge Ms Sheet; Outlet Chute 8” To 7” Tapered X 7” Length And 3” Covered Walls Made From 16 Gauge Ms Sheet; Grain Sheet 14” Long X 3.5” Wide With 1.5” Side Walls. Air Flow Regulation Arrangement From 16 Gauge Ms Sheet; Motor Frame 25X5mm Ms Flatsuitable To Mount Electric Motor;Marking Shall Be Done With Manufacturer’S Name, Size Of Sheller And Appropriate Motor Required/Power (Hp& Phase) Of Motor. Maize Sheller Shall Be Provided With Electric Motor Of Upto 1 Hp Power And V-Belt To Connect The Motor To The Sheller. , Chaff Cutter Specification Ms Sheet Body Hand Driven 1. Handle Consist Of Handle Support Of Mild Steel Rod And Wooden Grip Placed Over The Rod. The Diameter Of The Handle Support Shall Be Minimum Of 15Mm.The Total Length Of The Handle Shall Be At Least 500Mm And The Length Of Wooden Grip Shall Be 410 To 450Mm.The Diameter Of The Grip Shall Be 37 To 42Mm.The Grip Shall Be Properly Attached With The Rod. The End Of The Rod Shall Be Threaded. The Handle Shall Be Attached With Fly Wheel By A Hexagonal Nut. 2. Fly Wheel Fly Wheel Of 800-820 Diameter With A Provision Of Safety Cover And Shall 808Mm With Have Provision Either To Operate It Manually.The Fly Wheel Shall 4 Holes Have Two Arms. One Arm Shall Be Provided With One Square Hole For Fixing Provided For The Handle, Three Holes For Fixing The Blade And Six Tapped Holes For Fixing Attaching The Bolts For Blade Setting Adjustment. At The Center Of The Arms A Circular Safety Guard Hole Shall Be Provided For Connecting It To The Main Shaft A Hole Of 10Mm. Diameter Shall Be Made On The Rim Of The Flywheel Hole 10Mm 3.Main Shaft The One End Of The Main Shaft Shall Rigidly Attached At The Center Hole Of Flywheel And Other Should Be Supported On A Plumber Block.The Length And Diameter Of The Shaft Shall Be 400Mm And 32Mm Respectively. Plumber Block Shall Be Provided With Grease Cup Provision. 4.Worm The Work Shall Be Fitted On The Main Shaft. The Hole Size Of The Worm Shall Be Such That It Should Push Fit On The Shaft. The Outer Diameter And Length Of The Worm Shall Be 75 Or 80Mm And 150 Mm Respectively.The Pitch Of The Work Shall Be 25Mm.It Shall Be Provided With Two Holes For Proper Fixing To The Shaft. 5.Worm Gears There Shall Be Two Gears. One Located At Upper Side And Other At The Lower Side Of Worm. The Outer Diameter Of The Gears Shall Be 120-125Mm And There Shall Be 11 Teeth In Each Gear. Option Of The Purchaser The Gears May Have 11 Or 13 Teeth.The Gear Shall Be Attached With Axels By Screws/Nut 6.Feed Rollers Here Shall Be Two Fixed Rollers. The Length And Outer Diameter Of The Rollers Shall Be 205 And 80Mm Respectively The Lower Roller Shall Have (11-10) Full Teethes And Upper Roller (9-10) Full And Two Half Teethes On Length Wise Periphery. The Rollers Shall Have Square Hole Of 24Mm Size For Fixing The Axles. , 7.Springs The Tension Springs Shall Be Provided To Keep The Upper Roller In Tension. Total Length Of Each Spring Shall Be Minimum 95Mm. The Outer Diameter Shall Be 20Mm. The Wire Diameter Shall 2.5 Mm And Number Of Coils Shall Bemin 18. 8.Cover Plates Two Sides And One Top Cover Plates Shall Be Provided To Protect The Feed Rollers As Wall For Proper Mounting Of The Worm And Worm Gears. Both The Side Plates Shall Be Attached By Three Tie Rods.The Rod Shall Be Of Minimum 250 Mm In Length And Both Ends Shall Be Threaded. Bush Shall Be Provided On Lower Side Of Plate For The Ease Of Changing Of Roller.Material Of Side Plates -Mild Steel (4Mm Minimum Thickness) 9.Mouth Piece A Rectangular Plate With Top Open Shall Be Attached At The Front Of The Feed Rollers. The Width And Height Of The Plate When Measured Internally Shall Be Minimum 205 Mm And 110Mm Respectively.The Shear Plate Shall Have (11-12) Full Teethes. 10.Back Plates There Shall Be Two Back Plates Fitted In Between Two Side Plates At The Rear And Rear Top:The Length Shall Be 205 Mm With 12 Teethes In Back Plate And Should Be Made Up Of Mild Steel Of 2Mm Thickness 11.Through Rectangular Or Trapezoidal Through Shall Be Attached On The Rear Of The Shear Plate. The Through Shall Be Detachable Provision For Changing The Angle Of Placement Of Through Shall Be Provided.The Total Length Of The Through Shall Be Minimum Of 900Mm.1Mm Holes For Nut Bolt Should Be Provided For Easy Installation. 12.Stand Stand Shall Consist Of Four Legs. The Leg Shall Be Made Of Angle Section Of Minimum 55*55*3Mm Size.The Leg Support Should Be Detachable With The Leg. The Fingers Should Be Separate Component Attached To The Leg. Length Of Leg-810Mm 1 Frame –Weldedframe Of Size: 200Mm Min. Total Weight Of The Chaff Cutter With Stand Shall Be Approx 70Kg(+-) 2 .72 Kgs% The Power Transmission Gears Enclosed And Run In An Oil Through. The Bearing Shall Be Completely Enclosed And Shall Have Provision Of Lubrication.All The Components Of The Chaff Cutter Shall Be Free From Cracks And Such Other Defects . The Cast Iron Components Finish Shall Not Be Porus.Ms Chaff Cutter Machine Shall Be Well Painted For Long Life. Marking And Packing Manufacturers Name Of Registered Trade Mark Must Be Provided (Note: Column No.17 And 17.1 May Be Read As Single Column.) , Chaff Cutter Specification Ms Sheet Body Power Driven1.Fly Wheel Fly Wheel Of 800-820 Diameter With A Provision Of Safety Cover And Shall 808Mm With Have Provision Either To Operate It Manually Or With Power. Width Of The Provision Fly Wheel Shall Not Be Less Than 25Mm. (V-Belt Section) The Fly Wheel Shall 4 Holes Have Two Arms. One Arm Shall Be Provided With One Square Hole For Fixing Provided For The Handle, Three Holes For Fixing The Blade And Six Tapped Holes For Fixing Attaching The Bolts For Blade Setting Adjustment. 2.Main Shaft The One End Of The Main Shaft Shall Rigidly Attached At The Center Hole Of Flywheel And Other Should Be Supported On A Plumber Block.The Length And Diameter Of The Shaft Shall Be 400Mm And 32Mm Respectively. Plumber Block Shall Be Provided With Grease Cup Provision. 3.Worm The Work Shall Be Fitted On The Main Shaft. The Hole Size Of The Worm Shall Be Such That It Should Push Fit On The Shaft. The Outer Diameter And Length Of The Worm Shall Be 75 Or 80Mm And 150 Mm Respectively.The Pitch Of The Work Shall Be 25Mm.It Shall Be Provided With Two Holes For Proper Fixing To The Shaft. 3.Motor Rail Length Should Be Minimum 255Mm And Thickness Should Be Minimum 1.6Mm 4.Worm Gears There Shall Be Two Gears. One Located At Upper Side And Other At The Lower Side Of Worm. The Outer Diameter Of The Gears Shall Be 120-125Mm And There Shall Be 11 Teeth In Each Gear. Option Of The Purchaser The Gears May Have 11 Or 13 Teeth.The Gear Shall Be Attached With Axels By Screws/Nut 5.Feed Rollers Here Shall Be Two Fixed Rollers. The Length And Outer Diameter Of The Rollers Shall Be 205 And 80Mm Respectively The Lower Roller Shall Have (11-10) Full Teethes And Upper Roller (9-10) Full And Two Half Teethes On Length Wise Periphery. The Rollers Shall Have Square Hole Of 24Mm Size For Fixing The Axles. 6.Springs The Tension Springs Shall Be Provided To Keep The Upper Roller In Tension. Total Length Of Each Spring Shall Be Minimum 95Mm. The Outer Diameter Shall Be 20Mm. The Wire Diameter Shall 2.5 Mm And Number Of Coils Shall Bemin 18. , 7.Cover Plates Two Sides And One Top Cover Plates Shall Be Provided To Protect The Feed Rollers As Wall For Proper Mounting Of The Worm And Worm Gears. Both The Side Plates Shall Be Attached By Three Tie Rods.The Rod Shall Be Of Minimum 250 Mm In Length And Both Ends Shall Be Threaded. Bush Shall Be Provided On Lower Side Of Plate For The Ease Of Changing Of Roller.Material Of Side Plates -Mild Steel (4Mm Minimum Thickness) 8.Mouth Piece A Rectangular Plate With Top Open Shall Be Attached At The Front Of The Feed Rollers. The Width And Height Of The Plate When Measured Internally Shall Be Minimum 205 Mm And 110Mm Respectively.The Shear Plate Shall Have (11-12) Full Teethes. 9.Back Plates There Shall Be Two Back Plates Fitted In Between Two Side Plates At The Rear And Rear Top:The Length Shall Be 205 Mm With 12 Teethes In Back Plate And Should Be Made Up Of Mild Steel Of 2Mm Thickness 10.Through Rectangular Or Trapezoidal Through Shall Be Attached On The Rear Of The Shear Plate. The Through Shall Be Detachable Provision For Changing The Angle Of Placement Of Through Shall Be Provided.The Total Length Of The Through Shall Be Minimum Of 900Mm.1Mm Holes For Nut Bolt Should Be Provided For Easy Installation. 11.Stand Stand Shall Consist Of Four Legs.8 Leg Supports And One Finger In Each Leg. The Leg Shall Be Made Of Angle Section Of Minimum 55*55*3Mm Size.The Leg Support Should Be Detachable With The Leg. The Fingers Should Be Separate Component Attached To The Leg. Length Of Leg-810Mm 1 Frame –Welded Motor Frame Of Size: 1015Mm Min. 11.Belt Belt To Be Provided Of The Size Of Flywheel To Motor Pulley For Rotation On Machine. 12.Motor Isi Motor 2H.P. To Be Provided With Motor Pulley. 13.Total Weight Total Weight Of The Chaff Cutter With Stand Shall Be Approx 70Kg (+-) 2Without Motor.72 Kgs% The Power Transmission Gears Enclosed And Run In Oil Through. The Bearing Shall Be Completely Enclosed And Shall Have Provision Of Lubrication.All The Components Of The Chaff Cutter Shall Be Free From Cracks And Such Other Defects . The Cast Iron Components Finish Shall Not Be Porus.Ms Chaff Cutter Machine Shall Be Well Painted For Long Life. Marking And Packing Manufacturers Name Of Registered Trade Mark Must Be Provided.(Note: Column No. 18 And 18.1 May Be Read As Single Column.)
