Bids Are Invited For Various Fabricated Spares For Rodding Shop -1 22901150130 2 Ea Punch Assembly For Thimble Removal Press As Per Drawing No:Rs-I / Sp / M / A2 / 1625, Rev.01 Material: En 24 2 22910013200 100 Ea Ear Pin With Split Pin For Bell Grab In Rs-I. As Per Drg No: Rod / Ga / Mech / A1 / 4333, Rev-1; Item-3 Moc : En24 Note: The Orientation Of The Trimmed Pin Head Shall Be Made Correctly With Reference To The Split Pin Position As Shown In Drawing. 3 22910017200 15 Ea Load Bar Acutator In Rodding Shop-I As Per Drawing: Rod / Sp / Mech / A3 / 4182, Rev-1. 4 22920100110 4 Ea Shaft, Item-1 Drg No. Nal / Pnd / S / Rod / Mech / A1 / 210, With Standard Key Ways For Roller Conveyor Of H / Uh M / C In Rs-1 Note: Item Should Be Provided With Antirust Coating And Wrapped With Polyeurethene. 5 22920100280 3 Ea Shaft With Standard Keys As Per Drawing No: Nal / Pnd / S / Rod / Mech / A1 / 210, Item No.2 Note: Item Should Be Provided With Antirust Coating And Wrapped With Polyeurethene. 6 22931080170 2 Ea Pre-Breaking Tool Hyd. Cylinder Rear End Pin D.100 X L.355 As Per Item No. 22 Of Dwg No. Rsi / Mech / Spr / A2 / 11186, Sht.3 / 3, Rev-1. 7 22960158300 8 Ea Rod Handling Arm For Thimble Press In Rodding Shop-I In Assembled Condition Comprising Of Item No. 1 To 14. As Per Drg:Rod / Sp / Mech / A1 / 4247, Rev-2 8 22970916180 4 Ea Base Plate For Charging Hoist Lt Wheel Assembly As Per Item 1 , Dwg No.Rs-I / Mech / Spr / A1 / 11412- Rev-1 9 22970916190 4 Ea Drive Wheel For Charging Hoist Lt Wheel Assembly As Per Item 2 , Dwg No.Rs-I / Mech / Spr / A1 / 11412- Rev-1 10 22970916200 4 Ea Cover Flange For Charging Hoist Lt Wheel Assembly As Per Item 3 , Dwg No.Rs-I / Mech / Spr / A1 / 11412- Rev-1 11 22970916210 4 Ea Lt Shaft For Charging Hoist Lt Wheel Assembly As Per Item 4 , Dwg No.Rs-I / Mech / Spr / A1 / 11412- Rev-1 12 22970916220 4 Ea Gear Pinion For Charging Hoist Lt Wheel Assembly As Per Item 5 , Dwg No.Rs-I / Mech / Spr / A1 / 11412- Rev-1 13 22970916230 4 Ea Bearing Hub For Charging Hoist Lt Wheel Assembly As Per Item 6 , Dwg No.Rs-I / Mech / Spr / A1 / 11412- Rev-114 22970916250 4 Ea Axle For Drive Wheel For Charging Hoist Lt Wheel Assembly As Per Item 7 , Dwg No.Rs-I / Mech / Spr / A1 / 11412- Rev-1 15 22972070180 5 Ea Cover Tray For Pawl Bar Of Rodding Bench Castingmachine In Rs-1 As Per Drawing No. Rs-I / Mech / Spr / A2 / 11065, Rev-1 Item No.1 To 4 16 23012100220 5 Ea De Shaft For Track Guide Roller For Aux Pusher Of Bath Breaking Machine In Rs-2 As Per Dwg No.Rs2 / Mech / Spr / A3 / 9764 17 23012100230 5 Ea Nde Shaft For Track Guide Roller For Aux Pusher Of Bath Breaking Machine In Rs-2 As Per Dwg No.Rs2 / Mech / Spr / A3 / 9763 18 23024201030 4 Ea Beam Guide Roller Pin D.25Xl.113 As Per Item No-1, Dwg-Rs-Ii / Mech / Spr / A2 / 11602, Sh-1 / 5 19 23024201040 4 Ea Beam Guide Roller Pin D.25Xl.102 As Per Item No-2, Dwg-Rs-Ii / Mech / Spr / A2 / 11602, Sh-1 / 5 20 23024201050 10 Ea Spacer Beam Guide Roller D.26Xl10 As Per Item No -3, Dwg-Rs-Ii / Mech / Spr / A2 / 11602, Sh-1 / 5 21 23024201060 4 Ea Guide Wheel Axle D.49Xl.200 Along With Locking Plate D.60Xl10 For Old Matting Table As Per Item No.4, Dwg-Rs-Ii / Mech / Spr / A2 / 11602, Sh-1 / 5 And Item No -10, Dwg-Rs-Ii / Mech / Spr / A2 / 11602. Sh-2 / 5 22 23024201070 4 Ea Encoder Shaft L.57 For Laddle Tilting Of Casting Machine As Per Item No-5, Dwg-Rs-Ii / Mech / Spr / A2 / 11602, Sh-1 / 5 23 23024201080 10 Ea Guide Wheel D.101 Beam Guide Roller As Per Item No-6, Dwg-Rs-Ii / Mech / Spr / A2 / 11602, Sh-1 / 5 24 23024201130 1 Ea Drive Shaft D.75 L.3212.5 Ct Wheel Of New Casting M / C As Per Item No- 18, Dwg- Rs-Ii / Mech / Spr / A2 / 11602, Sh-4 / 5, 25 23024201140 2 Ea Drive Shaft D.70 L.1698 Lt Wheel, New Matting M / C As Per Item No-20, Dwg-Rs-Ii / Mech / Spr / A2 / 11602, Sh-5 / 5 26 23026114510 4 Ea Guide Wheel Assy For Bucket Of Skip Hoist F-145 And F-60 Of Rodding Shop-Ii, As Per Drg No.Rs-Ii / Mech / Ga / A2 / 11329, Sh-1 / 2 And 2 / 2, Note: - Bearings Used Shall Be Of Skf / Fag / Ntn Make Only. - The Size Of Bearing Is 6206 2Z. - The Assembly Shall Be Painted With 2 Coats Of Glossy Enamel Paint ( Grey ) . 27 23205171140 1 Ea Tail / Take Up Pulley For Belt Width 650Mm For Bc 70 In Crs As Per Drawing No.Butt2 / Mech / Spr / A2 / 9937, Sr No.2, Face Width: 750Mm, Brg Centre Distance: 1100Mm, Od Of Pulley: 350 Mm, Shaft Dia At Bearing: 55Mm., Shell Thickness : 10 Mm Note: 1. Detail Note In Drawing Has To Be Taken Care Of While Manufacturing Of The Pulleys. 2. Pulley Has To Be Manufactured As Per Standard Is 8531. 3. Continuous Welding Shall Be Done. 4. Stress Relieving Shall Be Done After Welding But Before Machining. 5. Static Balancing Shall Be Done For Pulley Shaft Assembly. 6. Shaft Has To Be Coated With Good Quality Rust Prevention Lubricant And Wrapped Properly With Polythene. 28 23206101030 16 Set Block For Apron Roller In Crs As Per Drawing No.Crs / Sp / Mech / A2 / 7307, Item Sl No. 9 29 23535014500 4 Set Tie Rod With Washer And Nuts Assembly For Secondary Crusher 10X36 Of Butt System As Per Drawing No.Butt-I / Mech / Spr / A3 / 10866 0 23535100160 4 Set Pin Bush Assy For Draw Back Rod Of Dragon Crusher In Butt-1 As Per Drg.No.Butt-1 / Mech / Spr / A3 / 9826, Item No.1 To 4 Total Quantity : 245
