|
| 1 | Earth work in hill road (hill side cutting):- Excavation in hilly area for construction of road in all types of soils, rocks & E&B etc. As met at site true to lines as per plan, L section cross slope, super elevation as required also including uprooting & cutting of bushes dressing of road surface to the required level and slopes with all lift & lead, required for safe disposal of surplus excavated material at suitable dumping places indicated in the drawing by mechanical means/ manual means andincludingconstruction of required coolie walling of minimum height of 0.60 mt with the stone available from the required hill side cutting for retaining of the muck , withoutdamaging forest, forest land,utilityandprivateproperties,includingslip clearance and its safe disposal (same as per mentioned above for safe disposal of surplus excavated material ), till the completion of the work as per part II special conditions of contract , MORD Specification Clause 1601, 1602 & 1603 and as directed by Engineer-in-charge. |
| 2 | Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction |
| 3 | R/W & B/W |
| 4 | X-DRAINAGE / DRAINAGE STRUCTURE |
| 5 | PETTY WORKS. LIKE PARAPET ETC. |
| 6 | Random Rubble Stone Masonry laid in 1:5 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, and other structuresetc. including supply of all material, labour, T&P and royaltiies etc.Technical specification clause 702, 704, 1202 and 1204 of MoRD Specification (As per PWD Uttarakhand specifications) |
| 7 | R/W & B/W |
| 8 | X-DRAINAGE / DRAINAGE STRUCTURE |
| 9 | PETTY WORKS. LIKE PARAPET ETC. |
| 10 | Random Rubble Stone Masonary laid dry in breast wall,retaining wall, parapets,scupper etc. Including supply of all materials,labour,t & p& royality etc,required for proper complition of work. Technical specification clause 702, 704, 1202 and 1203 of MoRD Specification. (As per PWD Uttarakhand specifications) |
| 11 | R/W & B/W |
| 12 | X-DRAINAGE / DRAINAGE STRUCTURE |
| 13 | HP stone filling in back of walls including cost of materials, Royalty supply of all material, labour, T&P etc. required for proper completion of the work as per direction of E in C. (As per PWD Uttarakhand specifications) |
| 14 | R/W & B/W |
| 15 | X-DRAINAGE / DRAINAGE STRUCTURE |
| 16 | Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire (@ 32 Kg/ 10 Sqm) conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders as per drawing and technical specifications Clause 1301. |
| 17 | ement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. Technical specification clause 802, 803, 1202 and 1203 of MoRD Specification (As per PWD Uttarakhand specifications). |
| 18 | T/W FOR R/W |
| 19 | X-DRAINAGE / DRAINAGE STRUCTURE |
| 20 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (PCC M-10 Grade) |
| 21 | X-DRAINAGE / DRAINAGE STRUCTURE |
| 22 | PETTY WORKS. LIKE PARAPET ETC. |
| 23 | Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 |
| 24 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204. |
| 25 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix (1:2:4) |
| 26 | White washing of parapet walls of CD work and Truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 |
| 27 | Providing and fixingof CC Edge stone 12cmx12cmx60cm size precast in M15 cement concrete with 4 no 8mm dia HYSDvertical bars and 3 nos 6mm dia HYSD bars stirrups as per approved drawing including two coat white washing on valley side of formation as directed by engineer in chargeand MORD specification for rural roadsetc. Complet (0.120x0.120x0.600)m |
| 28 | Construction of hill side pucca drain in accordance with the requirement of specifications true to lines and grades. Dimesions and other particulars as per drawing and Technical Specification Clause 1606.1. Quantites of material/work shall be as per design and drawing. |
| 29 | Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction |
| 30 | Random Rubble Stone Masonry laid in 1:5 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, and other structuresetc. including supply of all material, labour, T&P and royaltiies etc.Technical specification clause 702, 704, 1202 and 1204 of MoRD Specification (As per PWD Uttarakhand specifications) |
| 31 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204. |
| 32 | The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical specification Clause 1907. |
| 33 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. PCC Grade M25. Height up to 5m. Using concrete Mixer |
| 34 | Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202. |
| 35 | Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202. |
| 36 | Providing and laying reinforced cement concrete in substructure completed as per drawing and technical specifications Clauses 802, 804, 805, 806, 807, 1202 and 1204 R.C.C. grade M 25. |
| 37 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 |
| 38 | Repairs of damages caused by rain/spillage of water Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with three wheel 80-100 kN static roller, complete as per Technical Specification Clause 301.5.5.1 |
| 39 | Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 Cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 ( for making super elevation ) |
| 40 | Construction of subgrade and earthen shoulders with approved material, including all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meetrequirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. |
| 41 | Construction of Coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work.(As per PWD Uttarakhand specifications) |
| 42 | Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. Using naturally occuring gravel. |
| 43 | WBM Grading 2Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.By Mechanical Means. |
| 44 | WBM Grading 3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. By Mechanical Means |
| 45 | Prime Coat Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 46 | Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 47 | Providing and laying Bituminous Concrete with the use of batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. (Using Shreded Waste Plastic Technology, specifications as per IRC SP 98 or Latest guidline issued by NRIDA). |
| 48 | Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 |
| 49 | 5th Kilometer Stone (Precast) |
| 50 | Ordinary Kilometer Stone (Precast) |
| 51 | 200 m stone (precast) |
| 52 | Providing & fixing of PMGSY Logo Board (retro-reflectorised Sheet) at starting point, end point and at every 2 Km distance of road length as per attached standard drawing duly painted and writtenand as directedby Engineer in charge. as per MORD specification Clause 1701 |
| 53 | Providing & fixing of Citizen Information Board(retro-reflectorised Sheet) with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as directedby Engineer in charge. as per MoRD specification Clause 1701 . |
| 54 | Providing & fixing of maintenance Information Board(retro-reflectorised Sheet) with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as directedby Engineer in charge. as per MoRD specification Clause 1701 . |
| 55 | Providing fixing of Title Information Board (retro-reflectorised Sheet)with PMGSY Logo at suitable place in the starting of the road as per attached standard drawing duly painted and written as directedby Engineer in charge. as per MORD specification Clause 1701 . |
| 56 | Providing and Fixing ofSemi Reflective Cautionary, Mandatory and Informatory Sign Board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600 mm x 600 mm ( For Hair Pin Bend ) Upto 0.90 Sqm |
| 57 | MAINTENANCE ACTIVIES |
| 58 | Routine Maintenance |
| 59 | Major Slip Clearance in all Type of Soil ,rock and boulders including cost of all material , machine,T&p etc required for proper compeletion of work as per mord specification of work 1611 |
| 60 | Ist Year |
| 61 | Iind Year |
| 62 | IIIrd Year |
| 63 | Ivth Year |
| 64 | Vth Year |
| 65 | Deploying Hydraulic excavator of 0.90cum bucket for clearence of Major slip in all type of soil rock and boulders including its operator ,pol, andall other charges required for proper compeletion of work |
| 66 | Ist Year |
| 67 | Iind Year |
| 68 | IIIrd Year |
| 69 | Ivth Year |
| 70 | Vth Year |
| 71 | Providing and laying of boulder apron laid in wire crate with 4 mm dia GI wireconforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and techniacal specification 1301 |
| 72 | Ist Year |
| 73 | Iind Year |
| 74 | IIIrd Year |
| 75 | Ivth Year |
| 76 | Vth Year |
| 77 | Coolie Walling including supply of all material, labour, T&P,royalty etc. required for proper completion of the work,as directed by Engineer-in-charge and as per PWD specifications 8.90 (For opening communication only) |
| 78 | Ist Year |
| 79 | Iind Year |
| 80 | IIIrd Year |
| 81 | Ivth Year |
| 82 | Vth Year |
| 83 | PBMC Maintenance |
| 84 | Maintenance under PBMC for 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains includingminor slip clearence , reshaping ,deepening and ,regrading ,as well ascatch water drains as per technical specification Clause 1907.3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus materialin approved muck disposal points as per specification clause 1903.4] Maintenance of scuppers &Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908.5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910.7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912.8} Repairing of potholes by removal ofloose material, trimming ofsids, cleaning of surface and providing tack coat bitumen imulsion and patch repair with 20 mm thick premix carpeting and Type B seal coatusing bitumen or catonic bitumen imulsion(in 3rd and 5th year).9] Two coatwhite washing onparapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191. |
| 85 | Ist Year |
| 86 | Iind Year |
| 87 | IIIrd Year |
| 88 | Ivth Year |
| 89 | Vth Year |
