|
| 1 | Taking down carefully copper/ aluminium old unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed. |
| 2 | M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FR-LS-H, drawn through PVC casing caping including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular terressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed. |
| 3 | (a) One light /one fan/one bell point controlled by one switch. |
| 4 | (b) One socket outlet 5 pins 5 amps controlled by one switch on same board. |
| 5 | (c) One socket outlet 5 pins 5 amps controlled by one switch on independent board. |
| 6 | Painting of Ceiling Fan/Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. |
| 7 | M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FR-LS-H cable withand including PVC concealed conduit ISI marked heavy duty for one light fan/bell point controlled by one switch includingmodular cover plateof suitable way matching with surrounding modular boxes with suitable size including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FR-LS -H cable as continuous earth wire and connecting to earth duly,complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained.(Ph-Red, N-Black, Half -Yellow, Earth- Green) |
| 8 | All as per srl item No 4 here-in-before but MODULAR call Bell point complete all as specified and directed. |
| 9 | All as per srl item No 4 here-in-before but MODULAR3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. |
| 10 | All as per srl item No 4 here-in-before but MODULAR3 pin 5 amps socket outlet on independent Board complete all as specified and directed. |
| 11 | All as per srl item No 4 here-in-before but MODULAR15/16 Amps socket outlet on independent board with 2.5 sqmm copper conductor FR-LS-H cale and 2.5 sqmm PVC insulated unsheathed coper conductor cable FR-LS-H (Green Colour) as earth lead complete all as specified and directed. |
| 12 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 13 | S&F socket outlet multi 5 pins 5 amp, complete all as specified and directed. |
| 14 | S & F switch socket combination 2 in 1, 5A flush type, complete all as specified and directed |
| 15 | S&F switch piano flush button single pole, one-way 15amps complete all as specified and directed. |
| 16 | S&F socket outlet 2 in 1, 6 pins 15 amp complete all as specified and directed. |
| 17 | S&F switch socket combination 3 pin 16A, flush type complete all as specified and directed |
| 18 | S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. |
| 19 | S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 20 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed. |
| 21 | S & F of Modular switch 1-way 6A, 1 module complete all as specified and directed |
| 22 | S & F of Modular switch 1-way 16A, 1 module complete all as specified and directed |
| 23 | S & F Modular Socket 6A/16A-2/3 Pin Combined 2 module complete all as specified and directed |
| 24 | S& F Modular Socket 6A-2/3Pin Combined 2 Module complete all as specified and directed. |
| 25 | S& F Modular Bell Push 6A 1 Module complete all as specified and directed. |
| 26 | S & F of Modular Fan Regulator 6A 1 Module, complete all as specified and directed |
| 27 | S & F in replacement LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 28 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 29 | Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10-watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed. |
| 30 | Supply and fixing in replacement round shape 6-watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 31 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm,35/36-watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 32 | S&F Bed side designer lamp, 5 watts, with LED lamp, including all wiring and switches required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 33 | supply and fix in replacement Decorative gate light made up of high-grade unbreakable polycarbonate material suitable for retrofit LED 20W B22 base with 1x20 watt LED lamp complete all as specified and directed. |
| 34 | Supply and fixing Decorative wall light, stainless-steel, rust-free fixture with white glass diffuser suitable for 7.5 W LED filament lamp complete with drivers, holders, x 7.5 W LED filament lamp LHFOAJD1TZ1I060 9405 including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 35 | Supply and fix in replacement unique LED flood/ focus light 70 W LED 6500 K with IP 65 protection complete all as specified and directed. |
| 36 | S&F in replacement of 10-watt LED lamp with white and cool light with a unique design integrating LED technology and motion detector for energy savings, detection range 10 mtr weather proof IP-55, day light sensing, angle of detection 180-degree, min luminous flux 1100 lmn complete all as specified and directed. |
| 37 | Supply and fixing waterproof LED Bollard Light round type pole lamp for garden, energy saving fitting, environment friendly long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED 10-Watt bulb, complete with looping box and connecting accessories complete all as specified and directed. |
| 38 | M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FR-LS-H ISI marked drawn into & including medium grade PVC conduit/ casing caping25 mm dia with all fittings and accessoriesand one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surfaceincluding taking down old old unserviceable submain wiring and making good disturbed surfacecomplete all as specified and directed. |
| 39 | M&L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FR-LS-H ISI marked drawn into & including medium grade PVC conduit/ casing caping25 mm dia with all fittings and accessoriesand one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surfaceincluding taking down old unserviceable submain wiring and making good disturbed surfacecomplete all as specified and directed. |
| 40 | S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 41 | S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 42 | S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 12 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 43 | S&F in replacement of old unserviceable sheet metal enclosure distribution boards, double door three phase 415 Volts 6 Ways Vertical TPN DB For Comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising the following (a) MCCB Four pole 100 Amps AC 415 Volts 25 KA - 01 Nos as incoming and 12 Nos MCB SP 40 Amps, C Series as outgoing complete all as specified and directed.Note:- (ii) The DB Shall be Flush Fixedand making good the disturbed surfaces matching with existing specifications shall be part of job at no extra cost (iii) Connection of the MCCBs/MCB with Cable shall be made through appropriate size pin /bottle type thimble -properly crimped. |
| 44 | S&F of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and directed. |
| 45 | Supply and fixing MCB\"s single pole & neutral 40 to 63 Amps rating 240V, 10KA \"C\" curve complete all as specified and directed. |
| 46 | S&F MCB\"s single pole 240 volts 6 to 32Amps 10 KA \"C’ series, complete all as specified and directed. |
| 47 | M&L earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mmthick buried directly in ground (earth pit not less than 2.25mdeep below normal ground level) with top edge of the plate not less than 1.5mbelow normal ground level, connected to galvanized iron wire 4.0mm diaby means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore includingGI lightgrade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing oncompletion, all as specified and directed. |
| 48 | Supply and fixing LED street light fitting 35-Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed |
| 49 | S&F in replacement of socket outlet 2 in 1, 3 pin, 5A Complete in existing circuit complete all as specified and directed. |
| 50 | S & F in replacement of switch piano flush button single pole one-way 5Amp 230 Volts in existing circuit complete all as specified and directed. |
| 51 | S & F in replacement of socket outlet 2 in 1, 3 pin, 5A and 15A flush type 230 Volts Complete all as specified and directed. |
| 52 | S & F in replacement of switch piano flush button single pole one-way 15Amp SP230 Volts in existing circuit complete all as specified and directed |
| 53 | S& F in replacement of switch Bell Push flush type 5 Amp one way complete all as specified and directed. |
| 54 | S & F in replacement of Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed. |
| 55 | S & F in replacement of Lamp holder/batten holder /angle holder insulated body with Bakelite back plate suitable for fittings in existing circuit complete all as specified and directed. |
| 56 | S& F in replacement of gang Box 15 Amp Switch socket combination complete all as specified and directed |
| 57 | S& F in replacement of gang Box 5 Amp Switch socket combination complete all as specified and directed |
| 58 | S & F in replacement of Hylam Sheet 4x4 to 4x6 inches for fixing of switches sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed |
| 59 | S & F in replacement of isolator MCB SP 240 Volts and rating from 6 to 40Amp C Curve with Capturing capacity 10KA including providing thimble for outgoing cables complete all as specified and directed. |
| 60 | S & F in replacement of isolator MCB SPN 240 Volts and rating from 6 to 40Amp C Curve with Capturing capacity 10KA including providing thimble for outgoing cables complete all as specified and directed. |
| 61 | S & F in replacement of Hylam sheet 6x10 to 8x10 inches for fixing of switches, sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed |
| 62 | S & F in replacement of Modular metal flush box 3 module, complete all as specified and directed. |
| 63 | S & F in replacement of Modular metal flush box 4 module, complete all as specified and directed. |
| 64 | S & F in replacement of Modular metal flush box 6 module, complete all as specified and directed. |
| 65 | S & F in replacement of Modular metal flush box 8 module, complete all as specified and directed. |
| 66 | S & F in replacement of Modular metal flush box 12 module, complete all as specified and directed. |
| 67 | S & F in Replacement of Modular White Cover Plate with Frame, 3 Module complete all as specified and directed. |
| 68 | S & F in Replacement of Modular White Cover Plate with Frame, 4 Module complete all as specified and directed. |
| 69 | S & F in Replacement of Modular White Cover Plate with Frame, 6 Module complete all as specified and directed. |
| 70 | S & F in Replacement of Modular White Cover Plate with Frame, 8 Module complete all as specified and directed. |
| 71 | S & F in Replacement of Modular White Cover Plate with Frame, 12 Module complete all as specified and directed. |
| 72 | M&L for Rewinding of ceiling fans with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 1200/1400mm sweep by dismantling its parts capacitor by replacing petty items such as split pins, clamps, nuts& bolts, bearing & washer both end of down rod, cleaning of fan body and its blade by cleaning agent, assembling and connecting testing complete all as specified and directed. |
| 73 | M&L for painting of Ceiling Fan / Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. |
| 74 | M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor 4 Mfd by replacing petty items such as nuts & bolts, bearing & washers, cleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting and testing Complete. |
| 75 | Supply and fixing ball bearing suitable for Ceiling and exhaust fan of any sweep and make complete all as specified and directed. |
| 76 | Supply and fixing gun metal bush ball bearing suitable for any sweep fan of any make complete all as specified and directed. |
| 77 | Supply and fixing of Capacitor Capacitor 2.5/3/4 mfd. complete all as specified and directed. |
| 78 | S&F in replacement of old unserviceable heating element with new one capacity of 1500 Watts (triangle type) for 25 Ltr geysers complete all as specified and directed. |
| 79 | S&F in replacement of old unserviceable heating element with new one capacity of 2000 Watts for 25 Ltr geyser (triangle type) complete all as specified and directed. |
| 80 | S&F old unserviceable heating element with new one capacity of 3000 Watts for 225 Ltr geyser complete all as specified and directed. |
| 81 | M&L for repair/replacement of Thermostat 7\"\"/9\" suitable for 25/50 ltrs capacity water geyser with automatic thermal cut out fixed in repair and including testing, complete all as specified and directed. |
| 82 | M&L for repair/replacement of copper Geyser Assembly with rubber packing for 25/50 ltrs capacity water geyser with automatic thermal cut out fixed in repair and including testing, complete all as specified and directed. |
| 83 | S & F, testing of compressor for split type air conditioner of capacity 1.5/2 ton and taking down of old unserviceable compressor, all as specified and directed by Engr-in-charge Make of AC - LG, Samsung. |
| 84 | S & F, testing of thermistor (temperature Sensor) for split type air conditioner of capacity 1.5/2 ton and taking down S&F E Blower, all as specified and directed by Engr-in-charge make of AC - LG, Samsung. |
| 85 | S & F and testing of PCB for split type air conditioner of capacity 1.5/ 2 ton and taking down old unserviceable PCB, complete all as specified and directed. |
| 86 | S & F and testing of Blower for split type air conditioner of capacity 1.5/2 ton and taking down old unserviceable Blower complete all as specified and directed. |
| 87 | S & F and testing of transformer for split type air conditioner of capacity 1.5/2 ton and taking down old unserviceable Blower complete all as specified and directed. |
| 88 | S & F and testing of outdoor unit fan blade for split type air conditioner of capacity 2/ 1.5 ton and taking down old unserviceable Sensor complete all as specified and directed. |
| 89 | S & F and testing of outer unit fan motor of split type air conditioner of capacity 1.5/2 ton and taking down of old unserviceable fan, complete all as specified and directed. |
| 90 | S & F and testing of 2 Way Valve Assembly of split type air conditioner of capacity 1.5/2 ton and taking down of old unserviceable fan complete all as specified and directed. |
| 91 | Supply and fixing of capacitor 50 MFD for 1.5 /2ton AC complete all as specified and directed. |
| 92 | M&L for Repair and replacement old unserviceable worn out/ Burnt parts of Voltage Stabilizer up to 10 KVA of any make complete all as specified and directed. |
| 93 | Supply and refilling of gas R-22/ R-410/R32/ R134a for split/ window/ central package type Air conditioners and Refrigerators including checking and fixing leakage complete all as specified and directed. |
