}

Tender For Construction Of Teen Shed Work In Kshir Sagar Malkham Arina In W-24, sagar-Madhya Pradesh

Ujjain Municipal Corporation has published Tender For Construction Of Teen Shed Work In Kshir Sagar Malkham Arina In W-24. Submission Date for this Tender is 23-03-2024. Paint System Tenders in sagar Madhya Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

42865539
Tender For Construction Of Teen Shed Work In Kshir Sagar Malkham Arina In W-24
Open Tender
Indian
Madhya Pradesh
Sagar
23-03-2024

Tender Details

Tender For Construction Of Teen Shed Work In Kshir Sagar Malkham Arina In W-24; 1 Exvation Work With 05Km Extra Lead 2 Cement Concrete Grade M-10 ( Nominal Mix ) With 20 Mm Maximum Size Of Stone Aggregate- Providing And Laying In Position Cement Concreteof Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up 3 Cement Concrete Grade M-20 ( Nominal Mix ) With 20 Mm Maximum Size Of Stone Aggregate- Providing And Laying In Position Cement Concreteof Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up 4 Cement Concrete Grade M-20 ( Nominal Mix ) With 20 Mm Maximum Size Of Stone Aggregate. 5 Thermo-Mechanically Treated Bars. ( Fe 500 D Or More ) - Reinforcement Forr.C.C. Work Including Straightening, Cutting, Bending, Placi Ng In Position And Binding Upto Floor Level Including Cost Of Binding Wire, Wastage And Over Laps Upto 12Mm Horizontal / Inclined Pos Ition Of Reinforcement Bars In Slab And Beams, Plinth, Chajjas, Lintels, Upto4.5M Vertical Length Of Reinforcement In Wall Columns ( Over Laps Shall Be Provided As Per Requirement Of Is : 13920; Is 456 & Sp :34 ) Etc. Complete. 6 Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete.-Centering And Shuttering Including Strutting, Propping Stretchin G Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply 7 Brick Work Will Well Burnt Open Bhatta Bricks Crushing Strength Not Less Than 25Kg / Cm² And Water Absoption Not More Than 20% In Abov E Plinth Level Upto Floor Two Level In Cm 1:6 Including The Cost Of 8 Moorum / Hard Copra- Supplying And Filling In Plinth Under Floors Including, Watering, Ramming Consolidating And Dressing Complete. 9 1:4 ( 1 Cement: 4 Sand ) -13 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 10 New Work ( Two Or More Coat Applied @1.67 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Appl-Finishing Walls With Ac Rylic Smooth Exterior Paint Ofrequired Shade: 11 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @0.90 Ltr / -Finishing With Deluxemulti Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers 12 In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gatesand Similar Works.- Providing And Fixingm.S. Tubular Frames Fordoors, Windows, Ventilators And Cupboard With Any Section Made Of 1.60Mm Or 1.25Mm Thick M.S. Sheet, Joints Mitred And Welded And G Rinded Finish With Profiles Required Size With 15X3mm Lugs 10Cm Long Embedded In Cement Concrete M-10 ( Nominal Mix With 20Mm Maximumsize Of Stone Aggregate ) Blocks 15X10x10cm Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bo Lts And Nuts As Required Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primers.1. Steel Work Welded In Built Up Sections / Framed Work Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Ofapproved Steel Primer 13 Hot Finished Welded Type Tubes.-Steel Work In Built Up M.S. Tubular Section ( Round, Square Or Rectangular Hollow Tube Etc. ) Trusses / Frame Work Etc. / Railing Work Etc. Including Cutting, Hoisting Fixing In Position And Applying A Priming Coat Of Approved Steel Pri Mer, Welded And Bolted Including Special Shapedwashers Etc. 14 Supply & Installation Of Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ±5% Total Coated Thickness ( Tct ) Thick Zinc Coating 120Gsm As Per Is: 277 In240mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15- 18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimu M To Avoid Scratches While Transportation And Should Be Supplied In Single Length Upto 12 Meter Or As Desired By Engineer-In Charge.The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55Mm ) With Epdm Seal Or With Polymer Coated J Or L H Ooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead Complete U Pto Any Pitch In Horizontal / Vertical Or Curved Surfaces Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting 15 Kota Stone 25Mm Thick Flooring Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To M Atch The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of 1:4 Cement Mortar ( 1 Cement : 4 Course Sand ) ( Minim Um Size Of Kota Stone 2.0

Key Value

Document Fees
INR 2000 /-
EMD
INR 25400.0 /-
Tender Value
INR 12.68 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail