Tender For Rfq - Belt - Hr - 626M - 2 Items, Hazira-Gujarat

Tender For Rfq - Belt - Hr - 626M - 2 Items No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 1 33398098 0003 0001 300803341 BELT,CONV,800MM,EP630/4,6/3,HRT2 Technical Details Name : Navneet Kumar Shukla Contact : 9909901012 Email : navneet.shukla@amns.in 326 M BELT,CONVEYOR TYPE : OPEN ENDS , SHAPE : CLEAT AND SIDEWALL TENSILE STRENGTH : 630 N/MM , NO OF PLY : 4 , WIDTH : 800 MM TOP COVER THICKNESS : 6 MM , BOTTOM COVER THICKNESS : 3 MM BELT CARCASS THICKNESS : 4.5 MM BELT CARCASS MATERIAL : ELASTOMER POLYAMIDE BELT TOP COVER GRADE : HRT2 , EDGE : MOULDED NO OF CROSS RIGIDITY PLIES : 2 , CLEAT LENGTH : 450 MM CLEAT HEIGHT : 140 MM (TCS 140R) , SIDE WALL HEIGHT : 160 MM (HDS 160R) CLEAT PITCH : 250 MM ADDITIONAL INFORMATION : BELT PROFILE 100-75-450-75-100 BELT TO CLEAT ADHESION STRENGTH MIN 12 N/MM AND BELT TO SIDEWALL ADHESION STRENGTH MIN 8 N/ MM AND BELT WEFT STRENGTH SHOULD BE MORE THAN 40 PERCENT OF WARP STRENGTH CLEAT AND SIDEWALL TO BE SUPPLIED EXTRA WITH BELT 10 PERCENT OF PO QTY BOTH ENDS SHOULD NOT HAVE CLEATS AND SIDE WALLS FOR 3 METERS, BUT SHOULD BE GIVEN SEPARATELY. Item Details : 1. PO Material reqd. as per Item Text only. Any variation unless requested or approved by AMNS shall lead to rejection of material. 2. Material to be packed in Boxes, Crates, stand etc for ease of unloading and handling at site. Loose material will not be accepted. 3. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO delivery date 4. In case of any query, vendor must discuss with the user or visit the site before submitting their Techno Commercial offer 5. As applicable - GA DWG, QAP, Technical Data Sheet etc to be submitted with their offer/quotation for technical review 6. Post PO - QAP and DWG approval required for manufacturing clearance to vendor (AMNS Discretion) 7. Post PO - Inspection and Test Reports (Physical, Chemical, UT etc.) required for dispatch clearance to vendor (AMNS Discretion) Item Note : 2 33400169 0001 0002 300781458 BELT,CONV,1400MM,EP630/4,6/4,HRT3,MOULD Technical Details Name : Sunil Kumar Prasad Contact : Email : SUNIL.PRASAD@AMNS.IN 300 M BELT,CONVEYOR TYPE : OPEN ENDS , SHAPE : FLAT , TENSILE STRENGTH : 630 N/MM NO OF PLY : 4 , WIDTH : 1400 MM , TOP COVER THICKNESS : 6 MM BOTTOM COVER THICKNESS : 4 MM , BELT CARCASS THICKNESS : 4.5 MM BELT CARCASS MATERIAL : ELASTOMER POLYAMIDE BELT TOP COVER GRADE : HRT3 , EDGE : MOULDED Item Details : ADDITIONAL INFORMATION : 1. VENDOR NEED TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL TO ISSUE DCC FROM SITE. 2. VENDOR TO SUBMIT SUPPLY CREDENTIALS AND QAP ALONG WITH THE OFFER/QUOTATION. THIS IS MANDATORY. ABSCENCE OF ANY REQUIRED DOCUMENT CAN LEAD FOR OFFER REJECTION FROM TECHNICAL SITE. 3. IN CASE OF ANY TECHNICAL QUERY VENDOR/SUPPLIER MUST TO DISCUSS WITH THE SITE BEFORE SUBMITTING THEIR OFFER/QUOTATION. 4. IN CASE OF ANY DEVIATION WRT TECHNICAL SPECIFICATION OF THE CONVEYOR IN ENQUIRY/TENDER, OFFER SHALL NOT BE CONSIDER FOR FURTHER PO ACTION. 5. SUPPLIER TO ENSURE PROPER PACKING OF THE MATERIAL DURING DISPATCH TO AVOID ANY TRANSIT DAMAGE. 6. VENDOR TO SUPPLY THE REQUIRED QTY IN SINGLE LENGTH ONLY. NO OTHER MODE OF DELIVERY WILL BE ACCEPTABLE. THIS IS TO BE NOTED DURING SUPPLY. 7. VENDOR TO ENSURE THE ABOVE POINTS MUST TO AQUIRE WITH CONFIRMATION IN THE OFFER/QUOTATION TO EVALUTE OFFERS AT TECHNICAL SITE

Refer document

Refer document

Refer document