Tender For Rfq - Belt - Ep - Bf 300M Mh 1500M - 2Item, Hazira-Gujarat

Tender For Rfq - Belt - Ep - Bf 300M Mh 1500M - 2Item o PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 1 33390420 0004 0001 300818535 BELT,CONV,1000MM,EP1000/4,8/4,T2 Technical Details Name : Sunil Kumar Prasad Contact : Email : SUNIL.PRASAD@AMNS.IN 300 M BELT,CONVEYOR TYPE : OPEN END , SHAPE : FLAT , TENSILE STRENGTH : 1000 N/MM NO OF PLY : 4 , WIDTH : 1000 MM , TOP COVER THICKNESS : 8 MM BOTTOM COVER THICKNESS : 4 MM , BELT CARCASS THICKNESS : 17.6 MM BELT CARCASS MATERIAL : EP , BELT TOP COVER GRADE : T2 EDGE : MOULDED Item Details : ADDITIONAL INFORMATION : 1. VENDOR NEED TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND TEST CERTIFICATES BEFORE DISPATCH OF THE MATERIAL TO ISSUE DCC FROM SITE. 2. VENDOR TO SUBMIT SUPPLY CREDENTIALS AND QAP ALONG WITH THE OFFER/QUOTATION. THIS IS MANDATORY. ABSCENCE OF ANY REQUIRED DOCUMENT CAN LEAD FOR OFFER REJECTION FROM TECHNICAL SITE. 3. IN CASE OF ANY TECHNICAL QUERY VENDOR/SUPPLIER MUST TO DISCUSS WITH THE SITE BEFORE SUBMITTING THEIR OFFER/QUOTATION. 4. IN CASE OF ANY DEVIATION WRT TECHNICAL SPECIFICATION OF THE CONVEYOR IN ENQUIRY/TENDER, OFFER SHALL NOT BE CONSIDER FOR FURTHER PO ACTION. 5. SUPPLIER TO ENSURE PROPER PACKING OF THE MATERIAL DURING DISPATCH TO AVOID ANY TRANSIT DAMAGE. 6. VENDOR TO SUPPLY THE REQUIRED QTY IN SINGLE LENGTH ONLY. NO OTHER MODE OF DELIVERY WILL BE ACCEPTABLE. THIS IS TO BE NOTED DURING SUPPLY. 7. VENDOR TO ENSURE THE ABOVE POINTS MUST TO AQUIRE WITH CONFIRMATION IN THE OFFER/QUOTATION TO EVALUTE OFFERS AT TECHNICAL SITE. 8. SUPPLY SCOPE - SINGLE ROLL - 300 M Item Note : 2 33398098 0001 0002 300083684 BELT,CONV,650MM,EP800/4,5/3,M24 Technical Details Name : Navneet Kumar Shukla Contact : 9909901012 Email : navneet.shukla@amns.in 1,500 M BELT,CONVEYOR TYPE : OPEN ENDS , SHAPE : FLAT , TENSILE STRENGTH : 800 N/MM NUMBER OF PLY : 4 , WIDTH : 650 MM , TOP COVER THICKNESS : 5 MM BOTTOM COVER THICKNESS : 3 MM , BELT CARCASS THICKNESS : 5 MM BELT CARCASS MATERIAL : ELASTOMER POLYAMIDE , BELT TOP COVER GRADE : M24 EDGE : CUT Item Details : 1. PO Material reqd. as per Item Text only. Any variation unless requested or approved by AMNS shall lead to rejection of material. 2. Material to be packed in Boxes, Crates, stand etc for ease of unloading and handling at site. Loose material will not be accepted. 3. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO delivery date 4. In case of any query, vendor must discuss with the user or visit the site before submitting their Techno Commercial offer 5. As applicable - GA DWG, QAP, Technical Data Sheet etc to be submitted with their offer/quotation for technical review 6. Post PO - QAP and DWG approval required for manufacturing clearance to vendor (AMNS Discretion) 7. Post PO - Inspection and Test Reports (Physical, Chemical, UT etc.) required for dispatch clearance t

Refer document

Refer document

Refer document