Maintenance Of Agartala Town Roads Under The Jurisdiction Of Central-Iii Sub-Division /Road Portion From Laxmi Narayan Temple To Purbasha/ Sh: Development Of Shoulder Portion By Paver Block And Other Allied Items., agartala-Tripura

Maintenance Of Agartala Town Roads Under The Jurisdiction Of Central-Iii Sub-Division / Road Portion From Laxmi Narayan Temple To Purbasha / Sh: Development Of Shoulder Portion By Paver Block And Other Allied Items.-Excavation In Cutting In Soil By Manual Means With Lead Upto 50 Mexcavation In Roadway Cutting In Soil By Using Manual Means For Carrying Of Cut Earth To Embankment Site With All Lifts And Lead Upto 50 M As Per Mord Technical Specification Clause 302.3. 2 Carriage Of Available Excavated Earth With An Average Distance Of 7.00 Km. By Mechanical Means Using Truck, Tiper, Lari, Loder Etc. Including Loading & Unloading & Dressing Complete As Per Directionof The Engineer-In-Charge. 3 By Mix In Place Methodconstruction Of Granular Sub-Base By Providing Well Graded Material Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Mord Technical Specification Clause 401. ( I ) For Grading I Material 4 Earthwork In Excavation For Structures As Per Drawing And Mord Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring & Bracing, Removal Of Stumps & Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides & Bottom And Backfilling In Trenches With Excavated Suitable Material.I ) Ordinary Soili ) Upto 3 M Depth 5 Filling In Foundation Trenches As Per Drawing & Mord Technical Specification Clause 305.3.9, 1200.I ) Sand Filling 6 Providing Concrete For Plain / Reinforced Concrete In Open Foundations Complete Including Formwork As Per Drawings & Mord Technical Specifications Clauses 802, 803, 900, 1202 And 1203. ( Including Centering, Shuttering, Staging Etc. But Excluding Reinforcement ) .I ) P.C.C Grade M 10 : Ii ) Nominal Mix 1:3:6 ( Hand Mixing ) 7 Brick Masonry Work In Cement Mortar In Foundation Completed Excluding Pointing & Plastering As Per Drawing & Mord Technical Specifications Clauses 600, 1202 & 1203..Ii ) Brick Masonry In 1:4 Cement Mortar 8 Plastering With Cement Mortar ( 1:4 ) 12 Mm Thick On Brickwork / C.C. Work Including A Finishing Coat Of Neatcement Punning With 2.75 Kg Of Cement Per Sqm In Substructure As Per Mord Technical Specification Clauses613.4 & 1204. 9 80 Mm Thick Factory Made C.C. Interlocking Paver Block Of M-35 Gradeproviding And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks Of Required Strength, Thickness & Size / Shape, Made By Table Vibratory Method To Attain Superior Smooth Finish Using Pu Or Equivalent Moulds, Laid In Required Grey Colour & Pattern Over 50 Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding / Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Fine Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc. All Complete As Per Specifications & Approval / Direction Of The Engineer -In-Charge: ( A ) 80 Mm Thick C.C. Paver Block Of M-35 Grade With Approved Colour, Design And Pattern.

INR 4000 /-

INR 275743.0 /-

INR 1.37 Crore /-