Tender For Providing Cold Storage System To Newly Construction Of Central Kitchen At Birrd Hospital, Tirupati, Tirupati-Andhra Pradesh

Providing Cold Storage System To Newly Construction Of Central Kitchen At Birrd Hospital, Tirupati , Supply And Installation Of Pre Fabricated Sandwich 60Mm Thick Puf Insulated Panel 0.4Mm Thick Ppgi / Ppgi, Density Of 400 Kg / M 3 For Wall And Roof Panels Of Cold Room Size 5.3 X 10.5 X 3 M (L X W X H) Make : Eakcon,Supply And Installation Of Pre Fabricated Sand Wich 60Mm Thick Puf Insulated Panel. Density Of 40 Kg / M 3 Floor Panels Of Cold Room With 10Mm Tar Felt On Both Sides For Floor Make : Eakcon,Providing Concrete Floring With Grade M20 Ratio 1:1.5:3 (Cement:Sand:Aggregate) As Directed By The Department Officials,Supply And Laying Of 25Mm Thick Kotastone / Kadapa Stone With Neat Finishing In The Curd Room As Directed By The Department Officials,Supply And Installation Of Door Size 900Mm X 2000Mm X 60Mm Ppgi / Ppgi With Manual Swing, Anti-Condensate Self-Limiting And Energy Saving Door Heater, Human Safety, Door Release, Heavy Duty Latches, Stainless Steel Door Hinges For Cold Room With Neccessary Locking Arrangments Make: Eakcon,Supply And Installation Of Door Frame 1150Mm X 2700Mm Pre - Fabricated Sandwich 80 Mm With Thick Puf Insulated Panel With Rigid Puf Injected Cfc Free Polyurethane Foam As Insulation And Ppgi Sheet 0.4Mm Thick On Both Side As Skin Materials And Having Density Of 40 Kg / M 3 As Directed By The Department Officials Make: Eakcon,Providing Inner And Outer Flashing On Both Sides With Ppgi / Ppgi Sheet 0.4Mm Thick,Supply And Installation Of 10W Nxc-101 Vapour Proof Moisture Proof Light Fitting Using Led Make : Philips,Supply Of Refrigeration Unit Capable Of 5.8Kw With Temperature Controller Model Specification Of Eakcon Temperature Controller As Detailed Below. Evaporating Units The Evaporator Is Housed Within The Cold Storage And Occupies Minimum Space. This Allows To Utilize Max Volume Of The Cold Storage. Stainless Steel Body (Ss 304) For Enhanced Durability And Strength. Inner Groved Copper Tubes For Superior Heat Transfer Coil To Enable Air-Defrosting. Improved Air Throw For Uniform Air Distribution External Rotor Driven Fans Have Low Noise And Confirm To Ip 45 Standards. Removable Side Panels For Easy Service. Ceiling Mounted With Ss Casing Operate On 415V / 3Ph / 50Hz Supply. Condensing Units Enjergy Efficient Hermatic Sealed Compressors (Make: Emerson) With Air Cooled Condenser On 415V / 3Ph / 50Hz Supply. Powder Coated Body Makes These Units Uv And Corrosiion Resistant. Inner Grooved Copper Tunes And Slit Alluminium Fins For Superior Heat Transfer. Filter Drier And Moisture And Dirt Protection. Pre Charged Unit Safety And Control Devices For Better System Protection. Thermally Protected And Permanently Lubricated Fan Motor . Refrigerant : R22 / R404 A Make: Eakcon,Supply And Installation Of Copper Pipe For Refregeration Unit Suction 7/8 Inch Dia And Liquid Line 3/8 Inch Dia And Tubular Insulation. Make: Nippon / Equivalent,Supply And Run Of 4 Sq.Mm 3 Core Unarmoured Sheathed Pvc Insulation Copper Cable For Wiring Of Evaporator Unit To Control Box Make: Finolex / Polycab,Supply And Run Of 2.5 Sqmm 3 Core Unarmoured Sheathed Pvc Insulation Copper For Wiring Of Evaporator Unit To Control Box Make: Finolex / Polycab,Supply And Run Of 1 Sqmm 3 Core Unarmoured Sheathed Pvc Insulation Copper For Wiring Of Evaporator Unit To Control Box Make: Finolex / Polycab,Supply And Installation Of Electrical Control Panel For (5.8 Kw) Refrigeration Unit Of Size 400Mm X 300Mm X 175Mm Made With 1Mm Thick Gi Powder Coated Sheet With Necessary Control Wiring For Compressor, Condenser Fan, Evaporator Fan, Digital Indicator, On-Off Switch,K Overload Relay And Contactor With Mcb Switch, Single Phase Preventer And With All Accessories. Also Necessary Provision Shall Be Make In The Panel For The Timer Control For Switching On Both Units (Working And Standby Units) As Specified The Timings By The Department Officials.,Supply And Installation Of 40 Mm Square Ss Frame Work 1M Height For Protection Of Wall Panels.,Supply And Installation Of 25 Mm Ss Pipe Frame Work For Protection Of Wall Panels.,Supply And Installation Of Safety Alarm Hooter For Inside Human Safety,Provide Of Plinth For Mounting Of Outdoor Units 1M X 1M X 0.3M With Grade M20 Ration 1:1.5:3 ( Cement : Sand:Aggregate) As Directed By Department Officials.

Refer document

INR 21500.0 /-

Refer document