Tender for Steel Sheet Of Size 6X1250x3200mm, kapurthala-Punjab

Supply Of Steel Sheet Of Size 6X1250x3200mmsteel Sheet Of Size 6X1250x3200mm,Steel Sheet Of Size 6X1250x3200mm., As Per Drawing: Din En 10025-5 S355 J2w+N. Specification For Ultrasonic Testing Of Steel Plates Shall Be Astm-A-578(Reapproved 2001). The Acceptance Standard Shall Be Level B (Para 8 Of Astm-A-578) With Frequency 100% (All The Plates Shall Be Ut Testing), Scnanning Shall Be Continuous Over 100% Of Palte Surface., Packing Instruction: Mild / Corten/ En Steel Coils, Sheets And Plates:- (A) Mild, En And Corten Steel Sheets In Coil Form. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I) The Whole Coil Should Be Wrapped With Double Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. Ii) The Inner Edge Of The Coil Should Be Protected By Gi Ring Followed By Another Iron Ring. Iii) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Iv) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. V) Hot Rolled Coils Shall Be Supplied With Rust Preventive Oil Coating On The Outer Layer, Inner Layer And On The Both Edges. Vi) Coils Processed Through Pickling And Or Skin Passing Or Cold Rolling Of Thickness Upto 2Mm Shall Be Protected Against Corrosion And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 . Vii) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting/ Stacking. Viii) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Ix) The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. (B) Mild, En And Corten Steel Plates/Sheets. I) Plates Above 5Mm Shall Be Supplied With Reaso

Refer document

Refer document

Refer document