Supply, Installation, Testing and Commissioning of 2 Sets of 110KW Centrifugal Pump Set and its allied work for Nirsa Water Supply at Clear Water Pumping Plant at WTP Maithan under D.W. & S. Mechanical Division, Dhanbad Group-B Supply Installation Testing And Commissioning Of 2 Sets Of 110 Kw Centrifugal Pump Set And Its Allied Work For Nirsa Water Supply At Clear Water P Plant At Wtp Maithan Dhanbad Urban Water Supply Scheme Phaseii , Cost Towards Supplying, Installation, Testing And Commissioning Of Electrically Drivenhorizontal Split Casing Centrifugalpump Set Capable Of Discharge-220 M3 / Hr Against Total Head-110M ( Make-Kirloskar / Wpil / Mather & Plate / Jyoti ) Coupled With Tefc 3Phase, Squirrel Cage Induction Motor ( Make-Kirloskar / Abb / Crompton / Jyoti ) Operated On 415V±10%, 3 Phase, Speed-1450-1500Rpm, Duty S1, Frequency-50 Hz, Mounted On Common M.S. Fabricated Base Plate Withsuitable Size Of Cidf Sluice Valve-1 No, Cidf Nr Valve-1 No, Foot Valve-1 No, Pressure Gauge-1 No, Tyre Coupling-1 No Etc All Complete. Head-110 Mdischarge-220 M3 / H ( Hp-110Kw Approx ) , Supplying All Labour Tools And Tackles For Taking Out Old And Damagedpump Set With All Accessories , Demolition Of Foundationfor Installation Of New Pump Sets. , Supplying All Labour Tools And Tackles For Making New Pcc Foundtiaon Of Size 6X4x4 With All Materials Such As Cement , Sand, Stone Chips, Foundation Bolt-6Nos Etc All Complete And Plastering And Punning Over Exposed Surface. , Cost For Adjusting Suction Pipe Line As Required With Supplying Of 6 Diapipe Or Suitable Dia-4M, Bend-2Nos., Flange-8Nos., Nut, Bolt, Washer-15Kg, Rubber Insertion-10Kg Etc, Cutting Of Pipe In Required Size And Doing Complete Welding Work Including All Labour, Tools, Tackle And Technician Charges.With Cp & Ohc. ( Rate After Deducting The Scrap Materials. ) , Cost For Adjusting Delivery Pipe Line As Required With Supplying Of 6 Diapipe Or Suitable Dia-5M, Bend-2Nos., Flange-8Nos., Nut, Bolt, Washer-15Kg, Rubber Insertion-10Kg Etc, Cutting Of Pipe In Required Size And Doing Complete Welding Work Including All Labour, Tools, Tackle And Technician Charges.With Cp & Ohc. ( Rate After Deducting The Scrap Materials. ) , Cost Towards Overhauling Of Motor Control Panelwith All Labour Tool, Tackles And Technician Charges For Disconnecting The Electric Line & Opening Of Electric Wireconnection Inside Panel. Cleaning, Checking And Changing Of Damaged Spare Parts Such As Contacter Setmnx225-4Nos And Mnx185-2No. L&T Make, Over Load Relay-2No, Timer-2No., Mccb 400A-2No.Etc All Complete And, Dressingand Doing Fresh Electric Connection With New Wire And Connector Inside Panel, Rechecking Of All Connections And Testing On Full Load. ( Rate After Deducting The Cost Of Scrap Materials ) . , Cost Towards Supplying, Installation , Testing & Commissioning Of Monoblock Type Centrifugal Pump Ofcapable To Discharge 550 Lpm Against Total Head 12 M, [ Make-Crompton Greaves ] With Squirrel Cage, Induction Motor Operatig On 220V±10%, 50C / S A.C. Supply Havingsuitable Speed For Dewatering Purpose In Pump House, Including All Labour Tools, Tackles, Technician, Transportation Cost, With S / F Of Suitable Sluice Valve, N.R. Valve And Foot Valve, With Operating Cable Of Size 2Cx 4 Sq. Mm -20M, Dol Starter Panel-1No., With Suitable Size Of Suction And Delivery Pvc Pipe-10M, Testing Of Pumpset On Full Load At Site Etc All Complete.
