}

Tender For Biology Lab Of Ratlam And Rewa, Bhopal-Madhya Pradesh

Government Departments has published Tender For Biology Lab Of Ratlam And Rewa. Submission Date for this Tender is 19-02-2024. Refrigerators Tenders in Bhopal Madhya Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

42250968
Tender For Biology Lab Of Ratlam And Rewa
Open Tender
Indian
Madhya Pradesh
Bhopal
19-02-2024

Tender Details

Tender For Biology Lab Of Ratlam And Rewa 1 Double door refrigerator. 2 Volume- 250 liters or better. 3 Frost free and deodorizing Coated paint on body and toughened shelves. 4 Operating Voltage-230-240 V. 5 6 Warranty: Two years 7 Should be supplied with compatible S Voltage stabilizer. Double Distillation Assembly Qty. 2 1 Double distillation plant with stand 5-D 10 liters/hour output. 2 Instant distilled water flow should bell there. 3 Easy to operate, durable, safe for routine use. AND 4 Quartz distiller, Demountable boiler C 5 Panel box and stand to accommodate regulator and electrical supply, clamps etc It F r 6 Quality of distillate - pyrogen free, PH-C 6.9-7.0 High purity, low conductivity. AND 7 Distilled water should be heavy metal, salts, pyrogen and iron free. 8 Specific Conductivity at 25 deg C less than 0.4 x 10-6S/cm 9 Glass material (or chemical insert c material) 10 Gas vent should be there to remove c volatile condensate impurities. impurities leaving the free from gaseous c 11 Automatic low water cut off. 12 Tubing should be made up of good quality rubber (heat resistant). 13 Wiring of the equipment should be enclosed in Case. 14 All consumables required for installation and standardization of i system to be given free of cost. 15 Power input to be 220-240VAC, 50 Hz fitted with Indian plug 16 Voltage corrector/stabilizer appropriate ratings meeting of ISI Specifications.(Input 160-260 V and S output 220-240 V and 50 Hz 17 Should be BIS approved product. 18 Two years warranty. Shaker Qty. 4 1 Can be switched from orbital to reciprocating (horizontal) 2 Shaking platform 300x300mm 3 Max. load 2kg 4 Shaking speed 30-420 rpm adjustable. 5 Timer 0-120 min/continuous 6 Elect. Supply 230 V or 115V; 50/60 Hz Enclosure protection IP 21 7 Two years warranty. Vortex Machine - Qty. 4 1 Operation 220-230 V AC and 50-60 Hz. 2 Max speed upto 3000 rpm 3 Heavy metal base and vacuum rubber feet. 4 Choice of continupus and touch run. 5 Variable speed control. 6 Should have shock absorber capacity 7 Should include micro tube insert attachment. S a 8 Should have 02 years warranty. 5 1 < UV CHAMBER Qty. 2 UV Cabinet with 9 long, short wave (254nm) & long wave (365nm) wave/daylight tube. L F 2 For Visualization of test objectives under tubes having long wave length (365nm), short wave length (354nm) as desired. ( C Use with ultraviolet lamp for observing L fluorescent effect chromatograms etc. f 4 Supplied with 3 tubes to work on 230 S volts A.C. only. 5 Provides and enclosed viewing space which eliminates external light interference. F 6 7 Control switches mounted on top of the unit C L 3 This self-Contained unit is designed for easy viewing 6 Portable UV Light Source (Torch) Qty. 4 9.2.24 Portable, light weight, and ergonomically designed. 1 Single or dual wavelength. 2 Choice of corded or cordless rechargeable units. 3 Unique automatic safety switch to prevent harmful UV radiation exposure P when unit is turned upside down. 4 UV Face Shield and Protection Goggles 7 1 Face visor form with adjustable head F strap. 2 Visor hinge able. 3 Material should be high quality scratch resistant polycarbonate. 4 Visor size should cover entire normal adult face. 5 Interchangeable screen. a 6 UV protection range should be approx. L 210nm 365 nm. 7 Light weight. 8 Screen should be sturdy and impact resistant. 9 180° all-round visibility. 10 Head mount should have a good fit and individually adjustable. 11 Should conform to quality norms for lab work like IS or equivalent. 12 Ventilated for anti-fog vision. 13 Free visor cleaning solution bottle is desirable. Protection Goggles 1 Should be of high quality Polycarbonate lenses. 2 Lens material should be scratch resistant and impact resistant. 3 Easy fit size. 4 Proper ventilation for anti-fog vision. 5 Should conform to quality norms for lab work like IS or equivalent. 6 Proper case should be provided. 7 Should be supplied with lens cleaning solution. Autoclave (Vertical) Qty. 2 1 Internal tank Capacity- 25 Liter 2 2 Load-2.00 KW Chamber dimension- Suitable for the C volume desired. 3 No. of Drums - As per norms 4 Working pressure- 1.2 kgf/cm sq.g 5 (15psi-17 psi) (Can be Upgraded up to ( 30 PSI) 6 Sterilizing Temperature- 1210C to S 1340C (1500C Optional) 7 Heat Average- <± 10C 8 Sterilization Time- 25 to 30 minutes 9 Digital Timer- 0 to 99 min. Construction- Double/ Triple wall & SSC 10 GMP construction Outer Chamber- Mild Steel (304 C stainless Steel-Optional) 11 Inner Chamber- 304 SS (316/316 LI Grades Stainless Steel -Optional) 12 13 Insulation-Glass Wool 14 Waste Container-Stainless Steel Door/Lid- Foot lifted with safety and D interlock device 16 Door Locking Type- Radial Type(Wing not Optional) 17 Water Filling & Removal- Manual Digital controls Radial locking, safety valve, low water detector and pressure interlock. PID controller 18 Low/high water cut-off device Digital alarm Temperature chart recorded Quality norms Certification- IS or equivalent 19 Should be supplied with Sterilization indicator tape, Autoclave bags, Stainless steel wire mesh carrier, Dressing drum Should be Supplied with 3.0 KVA 19 Voltage stabilizer 9 Microwave Oven Qty. 2 1 Capacity- 30 Litres 2 Installation Type- Countertop 3 Oven Mode- Convection 5 Colour- Any 6 Wattage-2350 7 Defrost System- Defrost 8 Door Orientation- Left 9 Material- Ceramic and high quality SS material. Included Components- User Manual, 10 Crusty Plate, Roller ring, 1 Microwave, Wire Rack 11 Display- Digital display 12 Alarm- Buzzer should be provided 13 Timer-Should be provided. 10 pH-Meter Qty. 2 1 Operation 220-230 V AC and 50-60 Hz 2 Should have easy operation, fast and accurate results Large LCD Display indicator of menu 3 choice, measuring units buffer, standardized and temperature 4 Internal diagnostic 5 Automatic recognition of buffers and three point calibration 6 pH range 0 to 14 pH 7 Resolution: 0.01 or less pH selectable 8 Relative accuracy - 0.01 pH 9 One extra pH electrode. 10 pH meter supply with calibration kit 11 Portable pH electrode stand. 12 Should come with two years of warranty. 11 Air Conditonor (2 Ton) safekeeping of 1 Capacity: 2 ton 2 Energy Rating: 3 Star or better. 3 Compressor Warranty: 10 years 4 Digital Temperature display; Low Noise Anti-Dust, Antimicrobial Protection, Anti-Corrosive Coating. 5 Refrigerant Gas: Environmental Friendly 6 Should include all necessary accessories for installation. S S Should be supplied with 3.0 KVA wall mountable voltage stabilizer 7 Computer (PC with Wi-Fi facility) Qty. 4 F 12 1 Processor: Intel Core i5 Processor or above a 7 Monitor:20 Wide screen LCD Monitor and above 2 Operating System (Factory Preloaded)- Windows 10 Professional a C L 3 HD Capacity-1 TB 4 RAM: 8 GB or above 5 6 Should have wireless connectivity provision H F S F 7 Should have CD/DVD writer 8 Wired/Wireless Keyboard mouse 9 Should have Bluetooth connectivity provision 10 Onsite OEM Warranty (Year)-3 year or more L 13 Multifunctional Printer with Photocopier BASIC SPECIFICATIONS 1 Power Voltage: 220-240 V AC, F Frequency: 50 Hz 2 Memory: 2 GB or higher Connectivity: (a) Ethernet 100Base- C 3 TX/10Base-T, (b) USB 2.0 or higher 4 Local control panel: Touch screen with Graphic Display One sided speed: (a) B/W: 30 ppm or 5 more, (b) Color: 20 ppm or more C COPIER Copy speed: (a) B/W: 30 ppm or more, (b) Color: 20 ppm or more C 1 Copy resolution: Up to 600 x 600 dpi, C 2 Zoom (Reduction/Enlargement): Variable zoom from 25% to 400% 3 4 5 6 Color capability: Full color Multiple copying: Up to 999 copies 7 Paper Size: A5 to A3 C P PRINTER PRINTER Print speed: (a) B/W: 30 ppm or more, (b) Color: 20 ppm or more 1 2 Resolution: Up to 1200 x 1200 dpi or more 3 Print from USB: Direct printing through pen drive from USB port 2.0 or higher 4 Operating Systems Windows SCANNER 1 Capability: Color and Black & White 2 Original size: A3, A4, A5 3 Scanning speed: (a) B/W: 20 ppm or more, (b) Color: 15 ppm or more 4 Scanning Resolution: Optical- 600 x 600 dpi or higher 5 Supported Scan destination: USB Memory Device, Network 6 File formats: Single page and multi page TIFF, JPEG, PDF, searchable PDF/Optical Character Recognition (OCR) PAPER HANDLING 1 Automatic Two Sided (Duplex): Standard 2 DOCUMENT FEEDER Capacity: Duplex Automatic Document 1 Feeder: 50 sheets 2 Paper Sizes: Custom, A3, A4, A5 BYPASS TRAY TRAY-1 1 Capacity: 50 sheets 2 Paper Sizes: Custom, A3, A4, A5 3 Paper weight: 60-200 GSM or more TRAY-2 1 Capacity: 50 sheets 2 Paper Sizes: Custom, A3, A4, A5 3 Paper weight: 60-200 GSM or more WARRANTY 1 One Year

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail