|
| 1 | Provision :- 3 No. 18.6 KM , 33 KV Line Power Evacuation works |
| 2 | 33 KV Bridling cross arms 75x75x6mm |
| 3 | 33 KV Composite Polymer AB Switch |
| 4 | 33 KV Composite Polymer Disc Insulators |
| 5 | 33 KV Strain hardware (T&C type) fittings |
| 6 | 33 KV Top clamps 75x75x6 mm Angle |
| 7 | 33 KV \"V\" CROSS ARM 1.5 MTR (5FT)- CENTRE MADE FROM 75X75X6MM ANGLE |
| 8 | 33 KV,10 KN pincomposite polymer insulator |
| 9 | ACSRDog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.) |
| 10 | ALUMINIUM BINDING WIRE AND TAPE |
| 11 | Aluminium paint |
| 12 | Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 13 | D.C. Cross arms 5\" centre to center(100x50x6 mm) Channel |
| 14 | EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE |
| 15 | H.BeamClamps65x8mm Flat |
| 16 | H.Beam Back Clamps65x8mm Flat(in Numbers) |
| 17 | Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor |
| 18 | MS strain plate 65x8mm 250mm long |
| 19 | PCC pole 9.1 Mtr , 280kg long |
| 20 | Single Pole Cut Point Channal (100x50x6mm MS Channel) 1.65 mtr Long |
| 21 | Stay Clamp65X8 MM of MS Flat for pcc Pole 280Kg. |
| 22 | Stay Insulators 90X65mm |
| 23 | STAY SET WITHOUT STAY WIRE 20 MM. (PAINTED) |
| 24 | WPB, 160x160mm, 30.44 Kg/Mtr., 13 Mtr Long. |
| 25 | 33 KV Bridling top clamps 75x75x6mm |
| 26 | 33 KV Guarding channel 75x40x6 mm |
| 27 | Back Clamp for 280 Kg PCC Pole MS Flat 50x8 mm |
| 28 | Back filling of poles with boulders.1 |
| 29 | Bracing/Support angle of 65x65x6 mm for 5\" (1.5 mtr ) centre DP |
| 30 | Carpet guarding 2no 33KV Guarding ch. Bolt 20 mm.- GI wire 6 SWG-25kg+ 8SWG-12 kg |
| 31 | Concreting of structures & foundation (1:3:6) |
| 32 | Danger Boards Enamelled 33 KV |
| 33 | I. Bolts 20 mm |
| 34 | M.S.Nuts and Bolts |
| 35 | Red oxide paint |
| 36 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 37 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 38 | Erection Cost |
| 39 | GST @ 18% |
