Decoration, Shed, Ornamental And Other Allied Works Of Municipal Hospital Building At Kalabagan, Birati, Kolkata 700051 Under Nddm- 1 125 Thk. Brick Work With 1St Class Bricks In Cement Morter B ( 1:4 ) In Ground Floor 2 Hire And Labour Charges For Shuttering With Centering And Necessary Staging Upto 4 M Using Approved Stout Props And Thick Hard Wood Planks Of Approved Thickness With Required Bracing For Concrete Slabs, Beams And Columns, Lintels Curved Or Straight Including Fitting, Fixing And Striking Out After Completion Of Works ( Upto Roof Of Ground Floor ) 3 Reinforcement For Reinforced Concret Work In All Sorts Of Structures Including Distribution Bars, Stirrups Binders Etc.Including Supply Of Rods, Initial Straightening And Removal Of Loose Rust ( If Necessary ) Cutting To Requisite With 16 Gauge Black Annealed Wire At Every Inter Section, Complete As Per Drawing And Direction. Bending To Correct Shape, Placing In Proper Position And Binding With 16.Gauge Black Annealed Wire At Every Intersection Complete As Per Drawing And Direction. 4 Ordinary Cement Concrete ( M-20 ) With Graded Stone Chips ( 20Mm Size ) Excluding Shuttering And Reinforcement, If Any Ground Floor. ( 1:1.5:3 ) . 5 Supplying, Fitting & Fixing Granite Slabs 15Mm To 18 Mm. Thick With Uniform Texture & Without Decorative Veins In Columns, Wall, Facia Etc. With 15 Mm Thick [ Avg ] Cement Mortar ( 1:2 ) Including Making Suitable Arrangements To Hold The Stones Properly By Brass / Copper Hooks Including Pointing In Cement Mortar ( 1:2 ) ( 1 White Cement : 2 Marble Dust ) With Admixture Of Pigment Matching The Stone Shades All Complete As Per Direction Of The Engineer-In-Charge Including Cost Of All Materials, Labours, Scaffolding, Staging , Curing And Roughening Of Concrete Surface Complete. Area Of Each Granite Slab > 0.6 Upto 1.0 Square Metre. [ Using Cement Slurry At Back Side Of Granite @ 4.4 Kg / Sq.M & White Cement Slurry For Joint Filling @ 1.8 Kg / Sq.M ] 6 Supplying, Fitting And Fixing Black Stone Slab Used In Kitchen Slab, Alcove, Wardrobe Etc. Laid And Jointed With Necessary Adhesive Cement Mortar ( 1:2 ) Including Grinding Or Polishing As Per Direction Of Engineer-In -Charge In Ground Floor. ( B ) Slab Thickness Above 25 Mm And Upto 37.5 Mm 7 Supplying, Fitting And Fixing Boiling Water Proof Ply Conforming To Is: 303-1989 Bonded With Phenol Formaldehyde Synthetic Resin Conforming To Is: 848-1974 Of Approved Make And Brand Fitted And Fixed As Per Design As Per Approval And Direction Of Engineer-In-Charge. [ Excluding The Cost Of Supporting Frame Work And Teak Wood Batten / Lipping ] In Ground Floor. ( Ii ) 16Mm 8 Supplying Fitting, Fixing Decorative Lamination Conforming To Is: 2046 : 1995 As Per Approved Make, Brand, Finish And Thickness With Fitting, Fixing The Same On Particle / Mdf / Ply Boards With Recommended / Approved Adhesive With Proper Clipping The Sides For Better Attachment As Per Direction Of Engineer-InCharge.The Rate Includes The Cost Of Labour, Adhesive And All Incidental Charges Thereof. In Ground Floor Glossy / Matt / Suede Excluding Surface Texture Or Metallic Lustre. ( I ) Thickness Of Laminate 1.5Mm 9 Plaster ( To Wall, Floor, Ceiling Etc ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Or Roughening Of Concrete Surface Including Throating Nosing And Drip Course Where Necessary. Ground Floor. ( I ) With ( 1:6 ) Sand & Cement Morter. 20 Mm Thk. Plaster 10 At 3Rd Floor 11 Applying Interior Grade Acrylic Primer Of Approved Quality And Brand On Plastered Or Cencrete Surface Old Or New Surface To Receive Distemper / Acrylic Emulsion Paint Including Scraping And Preparing The Surface Throughly, Complete As Per ManufacturerS Specification And As Per Direction Of The Eic. ( In Ground Floor ) . ( A ) One Coat. Ii ) Solvent Based Interior Grade Acrylic Primer 12 Applying Acrylic Emulsion Paint Of Approved Make And Brand On Walls And Ceiling Including Sand Papering In Intermediate Coats Including Putty ( To Be Done Under Specific Instruction Of Superintending Engineer ) : ( Two Coats ) . I ) Standard Quality 13 Supplying Solid Flush Type Doors Of Deluxe Decorative ( Both Side ) Quality, Conforming To I:S 2202 Timber Frame Consisting Of Top And Bottom Rail And Side Styles Of Well Seasoned Timber 65Mm Wide Each And The Entire Frame Fitted With 27.5Mm Wide Battens Places Both Ways In Order To Made The Door Of Solid Core And Internal Lipping With Teak, Mahogony Or Rose Wood Approved Decorativeveneers Using Phenol Formaldehyde As Glue Etc. Complete, Including Fitting, Fixing The Shutters In Position But Excluding The Cost Of Hinges And Other Fittings In. Ground Floor: ( A ) 35Mm Thick Shutters ( Single Leaf ) 14 Supplying, Fitting & Fixing In Position Suspended False Ceiling With Frame Work Of Aluminium Hollow Section Of Size 50Mm X 25Mm ( 2.0Mm Thickness ) Combined With Aluminium Corners Of Size 38Mm X 25Mm, Suspended By Aluminium Hollow Tube Section Of Size 38Mm X 25Mm Having Size Of 600Mm X 600Mm Ceiling With Aluminium Composit Panels ( Acp ) - Interior Grade Of Thickness 3.0Mm Comprising Of Proctective Film, Polyester Coating, Primer, Aluminium Coil, Adhesive Film, Polyethylene Core Again With One Layer Adhesive Film, Aluminium Bottom Coating And Finally Service Coating As Per ManufacturerS Specification Finished With Aluminium Screw And Silicon Sealent Complete In All Respect Including All Incidental Charges Etc. As Per Direction Of Engineer-In-Charge 15 Scantling Upto 50Mm Wide And 12Mm Thick ( Chamfering Or Rounding ) For Ceiling / Partion Battens Including Fitting, Fixing In Position With Washers, Coach Screws Etc. Complete.: ( B ) Sishu / Champ / Badam / Gamar / Bhola / Mogra / Hallak 16 Anodised Aluminium Barrel / Tower / Socket Bolt ( Full Covered ) Of Approved Manufactured From Extruded Section Conforming To I.S. 204 / 74 Fitted And Fixed With Cadmium Plated Screws. ( Vi ) 200Mm Long X 10Mm Dia. Bolt. 17 I ) Hydraulic Door Closer Of Approved Quality As Per I.S.I. Standard Fitted And Fixed Complete. ( B ) Medium ( I.S.I. Size 2 ) 18 Supplying, Fitting And Fixing M.S. Clamps For Door And Window Frame Made Of Flat Bent Bar, End Bifurcated With Necessary Screws Etc. By Cement Concrete ( 1:2:4 ) As Per Direction. ( Cost Of Concrete Will Be Paid Separately ) . ( C ) 40Mm X 6Mm, 125Mm Length 19 Iron Butt Hinges Of Approved Quality Fitted And Fixed With Steel Screws, With Isi Mark. ( Ii ) 50Mm. X 40Mm. X 2.5Mm. 20 ( A ) Supplying Godrej Mortice Lock Chromium Plated With Latch And Keys 4 Levers, Including Fitting And Fixing Complete 21 ( I ) Door Stopper. ( Brass ) 22 Anodised Aliminium D-Type Handle Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification ( I.S. 230 / 72 ) Fitted And Fixed Complete. ( Ii ) 100 Mm Grip X 10 Mm Dia Rod. 23 Supplying, Fitting And Fixing Pvc Pipes Of Approved Make Of Schedule 80 ( Medium Duty ) Conforming To Astmd - 1785 And Threaded To Match With Gi Pipes As Per Is : 1239 ( Part - I ) . With All Necessary Accessories, Specials Viz. Socket, Bend, Tee, Union, Cross, Elbo, Nipple, Longscrew, Reducing Socket, Reducing Tee, Short Piece Etc. Fitted With Holder Bats Clamps, Including Cutting Pipes, Making Threads, Fitting, Fixing Etc. Complete In All Respect Including Cost Of All Necessary Fittings As Required, Jointing Materials And Two Coats Of Painting With Approved Paint In Any Position Above Ground. ( Payment Will Be Made On The Centre Line Measurements Of Total Pipe Line Including All Specials. No Separate Payment Will Be Made For Accesories, Specials. Payment For Painting Will Be Made Seperately ) 100 Mm 24 Labour For Fitting And Fixing High Density Poly-Ethylene Pipes Or P.V.C. Pipes For Above Ground Work Including Cost Of Jointing Materials Paints Etc. Fitting And Fixing All Necessary Specials, Cutting Pipes, Making Threads, Cutting Holes In Walls Or R.C. Floor Where Necessary And Mending Good All Damages Excluding The Cost Of Masonry Or Concrete Work, If Necessary, But Including The Cost And Fitting And Fixing Holder Bat Clamps ( Any Floor ) Or For Underground Work Including Cutting Trenches Upto 1.5 Metre And Refilling The Same Complete As Per Direction Of The Engineer-In-Charge. ( Payment Will Be Made On Centre Line Measurement Of The Total Pipeline Including Specials. ) . A ) Above Ground ( Ix ) 100 Mm Dia. / 110 Mm Dia. 25 Supplying Fitting And Fixing P.V.C. Door Shutter Of Approved Quality & Shade In Position, The Style & Rail Of The P.V.C. Door Shutter Will Be Made Of Rigid P.V.C. Multicavity Hollow Chamber Of Suitable Size And Section With 2.0 Mm ( + / -0.2 Mm ) Wall Thickness, The Section Will Have 2Nos. Built In Beads, Horizontal & Vertical Section Shall Be Fixed To Each Other By Self Tapping Screws And 2 Nos. Of Solid Plastic Or M.S. Tubular Galvanised Brackets Of Length 200Mmx80mm And Other100mmx100mm Both 1.20 Mm In Each Corner Of The Shutter Frame For Placing Hinges. Polymer Based Multicavity Hollow Section Of 105 Mm X37mm With 2.0 Mm ( + / - 0.2 Mm ) Wall Thickness Will Be Fitted In The Middle As Lock Rail Reinforced By Solid Polymer Bar Of 200 Mm Long At Both Ends Abd Screws From Both Sides. The Section Frame Will Then Be Fitted In By Pvc Panels Of Size 100 Mmx20 Mm With Wall Thickness Of 1.2 Mm ( + / - 0.2 Mm ) And 2 Nos. Of 6 Mm Dia And Screws From Both Sides 6Mm Dia Bright Rod Will Be Inserted Horizontally With Both Side Check And Nut System And Stretches Where Fixing Of Hinges / Hasp Bolt / Tower Bolt / Door Ring Are Required To Be Strong Enough To With Stand Wear And Tear. The Rate Is Inclusive Of Cost Of All Materials, Labour, And Hire Of Tools And Plants And Appliencies. Carriage Of All Materials Taxes And All Other Incidental Charges Complete.The Rate Is Exclusive Of Cost Of Hinges, Hasp Bolt, Tower Bolt, Door Ring Etc. In Ground Floor. 26 Supplying Prifiles Of Required Sections Made Of Aluminium Alloy Extrusions Conforming To Is: 732-1983 Annodized ( With Required Film Thickness And Specified Colour / Natural ) Matt Finished Conforming To Is:1868-1983 For Fabrication Of Composite Door, Sliding & Casement Windows Partitions Formed Of Basic Sections Of Any Isi Embossed / Certified Make And Brans As Per Direction Of Eic. A ) In 10-12 Micron Thickness Annodizing Film.B ) 3 Track Sliding Window. D ) Shutter. ( I ) Bottom & Top Member 27 ( Ii ) Style Side Member 28 ( Iii ) Inter Lock Member 29 Labour Charge For Fabrication And Installation Of Composite Door, Window, Partitions Made From Annodized Extruded Alloy Aluminium Sections For The Following Units. ( A ) Glazed Aluminium Sliding Windows Made Of Extruded And Annodized Alloy Aluminium Sectios, Fabrications, Including Cutting To Proper Shape And Size, Drilling And Aligning Of Window Shutter Frame Fitted With In Built Locking Arrangements, Sliding Rollers And Other Necessary Fittings, Fixture, Adhesives And Joineries Along With Extruded Neoprine Or Epdm Gasketing In Between Window Frame And Masonry Work ( Walls, Column, Beam.Lintels Etc. ) As Well As Between Glass And Shutter Frame For Fixing Glass And Polysulphide Sealant And In Between Shutter And Window Frame Where Necessary Including Cutting To Requisite Size And Fixing Glass As Per Drawing, Specification And Direction Of Eic. The Rate Includes The Hire Charge Of All Tools And Plants, Including All Incidental Charges, Adhesive, Joineries Such As Screw, Cleat Angle Etc. But Excluding The Cost Of Extruded Aluminium Sections, Glass, Neoprene / Epdm Gasket, Locking Arrangement And Rollers Ii ) 3 / 4 Track Sliding Window 30 Supplying Bubble Free Float Glass Of Approved Make And Brand Conforming To Is: 2835-1987. Iii ) 5 Mm. Thick Clear Glass 31 Supplyig Epdm Gusket Of Approved Make And Brand As Per Direction Of Eic. I ) For Sliding Windows. A ) T Shaped Epdm Gasket For Frames. 32 Supplying Pvc Rollers For Sliding Widows As Per Direction Of Eic. 33 ( A ) Priming One Coat On Steel Or Other Metal Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc 34 ( A ) Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary. With Other Than Hi-Gloss Of Approved Quality. With Other Than Hi-Gloss Of Approved Quality. ( Iv ) Two Coats ( With Any Shade Except White ) 35 M.S. Structural Works With Hollow Sections ( Square Or Rectangular Shape ) Conforming To Is: 806-1968 & Is:1161-1998 ) Connected To One Another With Bracket, Gusset, Cleat As Per Design, Drawing & Direction Of Engineer-In-Charge Complete Including Cutting To Requisite Shape & Size, Fabrication Including Metal Arc Welding Conforming To Is: 816-1969 & Is: 9595 Using Electrodes Of Approved Make And Brand Conforming To Is:814- 2004, Haulage, Hoisting And Erection All Complete. The Rate Includes The Cost Of All M.S. Hollow Section, All Consumables Such As Electrodes, Gas And Hire Charges Of All Tools And Plants And Labour Reqired For Execution And All Incidental Chages ( Such As Electricity, Labour Insurance ) Etc. Complete. Payment To Be Made On The Basis Of Calculated Weight Of Structural Memebrs Of Ms Holow Section As Specified In Relevent Is Code In Finished Work. Payment For Gusset, Bracket, Cleat May Be Made By Adding The Actual Weight Of Such Items With Weight Of Finished Structural Members. The Rates Are Considered For A Hight Of Erection 8 M. / 2Nd Floor Level From The Ground. Add 1.5 % Extra Over The Rate For Each Additional Floor Or 4M. Beyond The Initial 8 M. Or Part Thereof. I ) For Roof Tm.S. Col. ( 100X100 , 4 Mm Thk. Wall ) @ 11.73 Kg / Mruss Works A ) Span Up To 12 Mtr. 36 Galvanised Corrugated Iron Sheet Work ( Excluding Thesupporting Frame Work ) Fitted And Fixed With 10 Mm. Dia J Orl Hook-Bolts, Limpet And Bitumen Washers And Putty Completewith 150 Mm. End Lap And One Corrugation Minimum Side Lap. ( Payment To Be Made On Area Of Finished Work ) ( Gci Sheet Tobe Supplied By Contractor ) . A ) With 0.60 Mm Thick Sheet 37 Painting With Ready Mixed Red Lead Paint Of Approved Make And Brand : 38 Supplying, Fitting And Fixing White Vitreous China Best Quality Approved Make Wash Basin With C.I. Brackets On 75 Mm X 75 Mm Wooden Blocks, C.P. Waste Fittings Of 32 Mm Dia., One Approved Quality Brass C.P. Pillar Cock Of 15 Mm Dia., C.P. Chain With Rubber Plug Of 30 Mm Dia., Approved Quality P.V.C. Waste Pipe With C.P. Nut 32 Mm Dia., 900 Mm Long Approved Quality P.V.C. Connection Pipe With Heavy Brass C.P. Nut Including Mending Good All Damages And Painting The Brackets With Two Coats Of Approved Paint. ( I ) 450 Mm X 300 Mm Size
