Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Towan Hall |
| 2 | Earth work inexacavationin trenches for foundations and for pipes cables etc.inordinary soil( loan clay orsand)including lift upto 1.5 mand leadup to 30m.&including filling watering& ramming of excavated earth in to trenchesor in to the space betweenthe building & the sides of foundation trenchesorinto the plinthandremoval&disposal of surplusexcavated earthas directed by the Engineer i/c upto a distance of 30 m from the foundation trenches.(SI-251) |
| 3 | Filling of earth in plinth under floor including watering ,ramming , consolidating & dressing complete including lead upto 30 m . & lift upto 1.5 m & including of cost. Carted up to5 km |
| 4 | Providing of sand filling in plinth under floor including watering ,ramming, consolidating anddressing complete including supply of all material labour T&P etc. required for proper completion of the work.lead upto 50 m. and lift upto 1.5m. and including cost of sand. |
| 5 | Providing and layingin cement concrete 1:4:8 (1 cement :4 coarse sand{FM 2.20-3.60} : stone ballast of 40 mm nominal size)and curing complete,including supply of all material labour T&P etc. required for proper completion of the work, in foundation and floors. |
| 6 | Providing and injecting chemical emulsionfor preconstructional antitermite treatment andcreatinga chemical barrier underand alroundthe column pits wall trenches basement excavation top surface if plinth filling junctionofwall and floor, alongthe the external perimeter of binding expansionjoints, surrounding ofpipes andconduits etc, complete (plinth area shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or anyotherapproved materialsuch as Heptrachlor or chordancewill be used. Therateofapplicationofchemical emulsion shallbe asfollows : (1)Treatment for masonary & foundation 5 liters per/100 sqm.(2) Back fill inimmediate contact with foundation 7.5 liters/100sqm(3) Treatment of top surfaceof plinth filling 5 liters/100 sqm (4)Treatmentjunction of wallandthe floor 7.5 liters /100 sqm(5)Treatmentofsoilalong external perimeter of building 7.5liters/100sqm.(6) Treatment of soil under apronalong external perimter 5 liters/100 sqm. Chapter 8 (1) |
| 7 | R.C.C. workwith cement, approved coarse sandand2 cm. (3/4\") guageapproved stone gritin the proportion of (1:1.5:3)(1cement :1.5coarse sand( FM2.20-3.60) :3 stone aggregate20mm)in RCC FOOTING excludingsupply of reinforcement and its bending but including its fixing in position and binding with 24 B W.G.G.I. bindingwire and including necessary centering and shuttering etc.and also including supply of all materials,labour andtools andplants etc, required for proper completion of the works. |
| 8 | Same As above item No. 6 but for plinth band |
| 9 | Same As above item No.6but forcolumns 1:1.5:3 |
| 10 | Same As above item No. 6but for the havier T-beam i.e. having spans upto 6 m. |
| 11 | Same As above item No. 5 but forlintel band1:2:4 |
| 12 | Same As above item No. 5but forT-BEAMslabs |
| 13 | Class 150 brick work in1:6cement and coarsesandof ( FM 1.5-2.20) modulus mortar infoundation and plinth including supply ofall materials,labourand tools and plants etc.requiredforpropercompletion of the work. |
| 14 | Class 150 brick work for one brick thick wall in1:4 cement and coarsesandof ( FM 1.5-2.20)mortar in super-structureaboveplinth levelup to floor two level ( up to two storeys ) including necessary cutting and mouldingofbrickworkas requiredandalsoincludinghoney combed brick work in thickness of wall more than 12cms. |
| 15 | Same As above item No. 17but in1:3 cement and coarse sand (FM 1.50-2.20) mortar in superstructure for wall thickness 12 cms & below. |
| 16 | Providing and laying\"brick coba\" 12mm thick laid with M.150 class brick bat coba 7.50cm. Thick with gap of 15mm to each other. over 20mm. Thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete waterproofing compound filed gaps of coba & top of coba mortar mixed with water proofing compoond. in 1:4 cement & coarse & morter finished smooth & top mashed false square 30cmX30cm. & side wall parapet shall be mono tythic plaster wall up to 30cm.higher & junction & corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T & P etc. com.for proper completion of work. CHAPTER 11 NEW ITEM |
| 17 | DOOR -30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. |
| 18 | M.S or iron work of small sizes & section such as holding down bolts ,M.S GRILL,wrought to be required from including supply of steel bolts ,nuts,wastage etc. |
| 19 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge. ely)Three track three panels sliding window with fly proof S.Swire mesh (Two nos. glazed & one no. wire mesh panels)made of (big series) frame 116 x 45 mm & sash 46 x 62 mmboth having wall thickness of 2.3 ± 0.2 mm and single glazingbead / double glazing bead of appropriate dimension. (Areaof window above 1.75 sqm). |
| 20 | DOOR FRAME-Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Framesof cross-section 90 mm x 45 mm having single rebate of 32 mm x 15mm to receive shutter of 30 mm thickness. The laminate shall be mouldedwith fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steadythe frame. |
| 21 | Providing and Fixing aluminium extruded section boby tubular type universal hydraulic door closer (having brand logo with ISI, IS :3564, embossed on the boby, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm ) with double speed adjustment with necessary accessories and screws etc. complete. |
| 22 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge |
| 23 | Mild steel or iron in plain work such asreinforced concrete or reinforced, brick work(whennot includedin anover all rates )wroughttorequired shape as necessary including bending for proper completion of thework andincluding supply of steel itswastage bendhooks andauthorisedover lappingshallbe measured upto floor two level. |
| 24 | 12 mm cement plasterinsingle coat on fair sideofsingle orhalfbrickwall for interior plastering up to floor twolevelincludinginternalrounded angles not exceeding 80mm ingirth nd finshed even and smooth.(1)1 cement:6 C sand (FM 1.50-1.75) |
| 25 | 12mm cement plaster in single coat on of stairs upto floor two level. (Analysis rate)rough side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth andfinished even and smooth no extra for mixing any additive. (1)1 cement :4 C sand (FM 1.50-1.75) |
| 26 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including groutingthe joints with white cement and matching pigmentsetc., complete. SIZE 600MM X 600MM |
| 27 | Providing and laying Vitrified tiles in different sizes(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, cement: 3 coarse sand), of approved make,in all colours &shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3(1 cement:3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete SIZE 600MM X 600MMskirting |
| 28 | Supply & fixing 6 mm thick china white glazed tiles in flooring or in skirting or Dado laid with 1:3cement & approved course sand mortar finished with white cement slurry jointing & polishing complete including supply of all materials,labour & tools & plants etc. required for proper completion of work. |
| 29 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 30 | P/F white cement based putty of average thickness 1mm ,of app. Brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. |
| 31 | Distempering (Two coat) with oilbound distemper of approved brand and manufacture of required shade on undercorted of wall surface to give an even shade overand including a priming coat with cement primer of approvedbrand and manufacture such asBerger, J & N Shalimar Paints afterthroughly brushing the surface free from mortar dropping and other foreign matter and also including prepairing the surface even with Plaster of Paris or approved synthetic material and sand paperedsmooth including cost of all materials labour T&P. |
| 32 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 33 | Providing and fixing of ISI marked AluminiumHandle of size125mm with necessary screws etc. complete. |
| 34 | Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrsPVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush, pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.a)- Orissa Pattern W.C. pan of size580x 440mwith integral type foot rests flush pipe and over flow arrangement. |
| 35 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. a) 32mm dia |
| 36 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wallswherever required White Vitreous China Wash basin size 550x400 mm with a15 mm CP Brass single hole basin mixer |
| 37 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. |
| 38 | Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms. |
| 39 | Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore |
| 40 | Providing & fixing on wall face PVC vent pipes including jointing with seal ring. a)90mm diaPVC pipe. |
| 41 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. a) for 100mm dia pipe. |
| 42 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. b) for 75mm dia pipe |
| 43 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design a) 150X100 mm |
| 44 | Providing and fixing plain PVC sanitary bend. a) 75 mm |
| 45 | Providing and fixing plain PVC sanitary bend. b) 50mm |
| 46 | Providing & fixing 32MM G.I. Pipes complete with G.I Fittings & clamps i/c cutting & making good the walls etc. |
| 47 | Extra for providing & fixing PVC ball float valve with brass & union 20MM DIA |
| 48 | P/F Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stablity for hot and cold water supplyincluding all CPVC plain and brass threaded fittings . . This includes jointing of pippes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Eng. I/C.Exposed on wall a) 25mm dia nominal bore (medium duty) |
| 49 | P/F Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stablity for hot and cold water supplyincluding all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 mt. spacing . This includes jointing of pippes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Eng. I/C.CONCEALEDwork including cutting ,chases and making good the wall etc.a)20mm dia nominal bore |
| 50 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.a) 15mm nominal bore |
| 51 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore |
| 52 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore |
| 53 | Providing and fixing C.P brass shower rose with 15 or 20 mm inlet100 mm diameter |
| 54 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 55 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter. |
| 56 | Providing, laying and joining glazed stone ware pipesheavy duty pipes grade \"A\"with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100mm diameter |
| 57 | Providing, laying and joining glazed stone ware pipesheavy duty pipes grade \"A\"with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.b) 150mm diameter |
| 58 | Wiring point for light with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit,GP Box , piano type switch & ceiling rose/angle/batten holder on 3mm thickphenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. |
| 59 | Wiring point for two ways light with 1.5 sq. mm. F.R. PVCinsulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit, GP Box andtwo number two waypiano type switches & ceiling rose / angle / batten holder on 3 mm thick phanolic laminated backelite sheet etc., complete in allrespect,as directed, including matching colour wash. |
| 60 | Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. |
| 61 | Wiringpointforplugwith 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit and piano typeswitch and socket etc., complete in all respect including matching colour wash. |
| 62 | Wiring point for exhaustfan with 1.5 sq. mm.FRLSHPVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit,GP Box , 15A piano type switch& ceiling rose on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect including matching colour wash. |
| 63 | Add for 2 way light point with modular switches in place of piano type switches. |
| 64 | Add for plug point with modular switch & socket in place of piano type switch & socket. |
| 65 | Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch. |
| 66 | Supply and wiring of submain with two number2.5sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 nos. 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. |
| 67 | Supply and wiring of submain withtwo number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq. mm.FRLSH PVCinsulatedmultistrand copper conductor cable as earth continuity wire drawn in conduit. |
| 68 | Supply and wiring of submain withtwo number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core aluminium conductor cable in 25 mm dia heavy duty (2 mm thick)PVC conduit with one number 4 sq. mm. FRLSHPVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. |
| 69 | Supply and fixing ofrecess/Surface/Pendentmounting round6 Watt 8 Watt LED Down Lighter having Powder coateddie cast aluminiumhousing withheat sink, diffuser/ Reflectorand driver set complete in all respect. CAT- AAA |
| 70 | Supply and fixing ofrecess/ Surface/ Pendentmounting round 15 Watt LED Down Lighter having Powder coateddie cast aluminium housing withheat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA |
| 71 | Supply and fixing of batten / angleholder complete in all respect. |
| 72 | Supply and fixing ofLED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fittingincluding tube on Surface complete in all respect.CAT- AAA |
| 73 | 16 sq. mm 4 core |
| 74 | 16 sq. mm 4 core |
| 75 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 76 | S&F of 6 Amp. to 32Amp. 4 pole MCB (10 KA) C Curve Cat-A |
| 77 | S&F of 40Amp. 4 pole MCB (10 KA) C Curve Cat-A |
| 78 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve Cat-A |
| 79 | Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect. |
| 80 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect. |
| 81 | Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thickISI Marked G.P.sheet spot welded Four to Eightholes for pipe entryof the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concretingalongwith supply of all material, labour, T&P etc. required for proper completion of the work. |
| 82 | Earth work in foundation in ordinary soil loam clay or sand including lift up to 1.5 m & lead up 30m including filling watering & ramming of excavated earth in to the trenches or in to the plinth removal & disposal of surplus earth asdirected by the Engineer- in- charge up to distance 30m from the foundation trenches. |
| 83 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone ballast 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. |
| 84 | As in item 4 abovebut inR.C.C.Raft foundation and footingwithapproved stone ballast. (Using1:1.5:3Mix concrete) |
| 85 | Providing and laying Vitrified tiles in different sizes(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, cement: 3 coarse sand), of approved make,in all colours &shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3(1 cement:3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete SIZE 600MM X 600MMskirting |
| 86 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete |
| 87 | Mild steel or iron in plain work such asreinforced concrete or reinforced, brick work(whennot includedin anover all rates )wroughttorequired shape as necessary including bending for proper completion of thework andincluding supply of steel itswastage bendhooks andauthorisedover lappingshallbe measured upto floor two level.(504) |
| 88 | Providing & fixing on wall face PVC vent pipes including jointing with seal ring. PVC PIPE 110MMDIA PIPE |
| 89 | Providing & fixing on wall face PVC vent pipes including jointing with seal ring. PVC PIPE 90 MM DIA PIPE |
| 90 | Providing & fixing on wall face PVC vent pipes including jointing with seal ring. PVC PIPE100 MM BAND |
| 91 | Providing & fixing on wall face PVC vent pipes including jointing with seal ring. PVC PIPE 75MM BAND |
| 92 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 93 | Providing of Aglaonema Parrot Jungle plant (three in one), having ht. 30 cm and above with 20 to 25 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot / Plastic pot. |
| 94 | Providing of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot |
| 95 | Providing of Aglaonema nitida plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fersh and healthy with attractive leaves in 25 cm size of Earthen pot / Plastic pot |
| 96 | Providing of Araucaria cookii plant, having ht.1.20 m to 1.35 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot. |
| 97 | Providing of Araucaria cookii plant, having ht.1.80m to 1.95 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 30cm size of Earthen pot / Plastic pot. |
| 98 | Providing Plant Antirrhinum Hybrid dwarf variety, specimen (8-10 plants) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot |
| 99 | Providing Plant Asiatic lilly hybrid variety (3 in one) plants in each pot having in full bloom 3 to 5 flowers 30 to 45 cm ht. well developed in 25 cm Earthen Pot/Plastic Pot. Each |
| 100 | Providing Plant Cyclemen hybrid variety specimen 5-6 plants fresh & healthy in full bloom well developed in 35 cm Earthen Tray/ Nand |
| 101 | Providing Plant Primula Hybrid variety specimen 5-6 plants in each Pot with fresh & healthy foliage in full bloom different colour well developed in 35 cm Earthen Tray/ Nand |
| 102 | Adenium Obesum well developed with fresh & healthy 4 to 5 branch 60 to 75 cm ht. plant in 40 cm size Earthen Pot/ Plastic Pot |
| 103 | Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. plant in 25 cm size Earthen Pot/ Plastic Pot |
| 104 | Buddha vally variety with umbrella shape plant having 120 to 135 ht. plant with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant |
| 105 | Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type plant well developed in 50 cm Cement Pot |
| 106 | Providing & fixing of Sprinkler for Garden 2.5bar 26to 32 ft spray diameter rotating 360 degree angle with piping all complete as per the direction of Engineer in charge. (for GARDEN AREA) |
| 107 | Supply & fixng of Boulder as per completer as per the direction of Engineer in charge. |
| 108 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge EXTERNAL WORK 100 MM DIA |
| 109 | Providing and fixing gun metal gate valve with C.I wheel of approved quality.a)65mm dia nominal bore |
| 110 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110MM DIA |
| 111 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 MM DIA |
| 112 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 150 MM DIA |
| 113 | P/L NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of (1:2) 300 mm dia. R.C.C. pipe |
| 114 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of pipes including bed concrete as per standard design 15 CM TH 300 MM DIA |
| 115 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: inside dimensions 455x610 mm and 45 cm deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 116 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 4 core |
| 117 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core |
| 118 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge. 6 sq. mm 4 core |
| 119 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge. 16 sq. mm 4 core |
| 120 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 6 sq. mm |
| 121 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 16 sq. mm |
| 122 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 300 mm dia |
| 123 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 124 | Supply and laying of3 core standered aluminium conductor XLPE(Cross linked polyethylene)insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connectedwith earth conductor by clamps etc. 120 sq. mm 3 core |
| 125 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :120 sq. mm |
| 126 | Supply & fixing steel tubular pole 7.50 Metre long designated 410 SP-4 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 127 | Supply and fixing ofdecorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and aboveprotection complete in all respect. At Height 3.0 m |
| 128 | Supply and fixing of3 Watt to 6 WattLED Spot/Spike light luminaire Confirming to IP 66 Protection complete in all respect. |
| 129 | Supply and fixing offactory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 100 to 120 Watt. Confirming to IP 65 protection complete in all respect. |
| 130 | Supply & fixing of 6 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mmbase plate 32 mm thik suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 131 | S&Fof 63 A. 415 VMetal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 132 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25A TPN |
| 133 | Supply and Wiring of submains with 4 nos. of 4 sq. mm.FRLSH PVCinsulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of allmaterial labour and T&P required for proper completion of the work as directed at site by Engineer in charge. |
| 134 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. |
| 135 | Supply and fixing offactory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. |
| 136 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core |
| 137 | 50sqmm 3.5 core |
| 138 | 63 Amp 4 Pole MCB (9/10KVA) |
| 139 | S&F of 200 A. 415 VMetal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 140 | Supply and Fixing of Designer Bencheswith all fixing as per direction of Engineer in charge. As per quo |
| 141 | Transportation Charges of drilling equipment including assembly and other material as required. |
| 142 | Drilling of 450 to 675 mm dia by rotary machine |
| 143 | Supply & laying of 150mm dia M.S housing pipe (7.2 mm thick)Tata/ Jindal |
| 144 | Supply & laying of 100mm dia M.S blind pipe (7.2 mm thick)Tata/ Jindal |
| 145 | Supply & laying of 100mm dia M.S slotted pipe (7.2 mm thick)Tata/ Jindal |
| 146 | Supply & fixing of 150mm dia M.S Ring |
| 147 | Supply & fixing of 100mm dia M.S Ring |
| 148 | Supply & fixing Bail plug 100 mm dia M.S. |
| 149 | Supply & fixing Well Cap 200 mm dia M.S. |
| 150 | Supply & fixing Housing clamp 100 mm diaM.S, |
| 151 | Supply & filing of Pee gravel 1.6 mm to 2 mm in side of bore after lower and development as required as per direction of E/I. |
| 152 | Development by O.P unit including transportation. |
| 153 | Well logging charges |
| 154 | PUMPING SET KSB make submersible pump set suitable for installation in bore well of min 150 mm inner dia preferably more and having under noted specifications.TYPE UQD 182/10 + 6 UMA I/H 150/22(S/D)+2.0HP Capacity 1400LPH Total Head 92M No of stages 6 Max OD of the pump set 150mm size of discharges out let 3” Speed in RPM2900 RPM H. P. of Motor 5.5 KW/ 5 HP Method of starting star delta supplyof voltage 400 V +3%3 phase The pumping set shall be comprise ( a ) Built in non-return valve ( b ) Sixstages bowl assembly with bronze impellers and S. S. impeller shaft etc. ( c ) 2.0 HP 2900 RPM sub mersible electric motor suitable for Star/Delta starting with 3RM cable 2 x 3 x 4 sq mm |
| 155 | Supply and fixing of finolex of copper cable ISI marked submersible cable of size 1 x 3 x 4 sq mm |
| 156 | Supply of controlpanel board cubical type wall mounted vermin proof with internal wiring duly enameled painted for mechanically finished having L&T or equivalent make switch fuse unit with HRCfuses, ammeter, voltmeter, selector switch phase indication lamp with bulb (instrument fuses, power capacitor, single phase preventercomplete set with supply of L&T Jyoti or equivalent Air break Star-Delta motor starter suitable for above pump set. |
| 157 | Supply of 80mm dia M.S. column pipe of class \"C\" both and socketed with heavy sockets in 3/6 meter length and one end flanged complete with interlocking arrangements. |
| 158 | Supply of 80mm dia M.S.column pipe clamps with nut bolts packing etc. |
| 159 | Supply of 80mm dia C.I. double flanged ISI mark reflex valve of upadhya or equ. Make |
| 160 | Supply of 80mm dia C.I. double flanged ISI mark sluice valve with hand wheel of upadhya or equ. Make. |
| 161 | Supply of C.I. double flanged bend of 80 mm dia i/c cost of material and labour. |
| 162 | Supply of 80mm dia C.I. tee heavy quality i/c cost of material. |
| 163 | Supply of Guru/Fiibing or equivalent make pressure gauge. |
| 164 | Supply of steel wire rope of 1/2\" size |
| 165 | S/B of 600 mm x 600 MM x 6.0mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead on one no. 8 to 10 SWG GI wite in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. , pipe and G.I. wire will be extra ) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects as per drawing. |
| 166 | S/F of one number 8 to 6 SWG G.I. Wire in 15mm dia G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour. T&P other material required for proper completion of the work as directed at site. |
| 167 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50. |
| 168 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 169 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 170 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 171 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth leve1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 172 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars( 2019) |
| 173 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster |
| 174 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar |
| 175 | Providing and fixing soil, waste and vent pipes :100 mm diameter :Sand cast iron S&S pipe as per IS: 1729 |
| 176 | Providing and fixing terminal guard :75 mm Sand cast iron S&S as per IS - 1729 |
| 177 | 455x610 mm rectangular C.I. cover (medium duty) the weight of the cover to be not less than 23 kg |
| 178 | Excavation in soil mixed with Kankar. Mooram, Bajari, requiring special T&P such as pick axes subbal etc. in sub soil under water. (PWD-251) |
| 179 | Providing&Layingin cement concrete 1:4:8(1 cement: 4 C. sand : 8 graded Stone ballast 40mm nominal size) and curing complete. Including cost of form work in foundations & floors.(PWD-281) |
| 180 | R.C.C. work with cement , coarse sand& 2 cm gauge approved S. B. in the proportion 1:1.5:3in R.C.C.BEAM excluding supply of reinforcement & including necessary centering & shattering etc. & supply of all material labour t&p etc.required(287) |
| 181 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks. (504) |
| 182 | PLAYING EQUIPMENT JHULA |
| 183 | ROTATING PLATE |
| 184 | SEA SAW |
| 185 | PLAYGROUND SLIDE |
| 186 | Supply and Fixing of a Multi Play Stationis made of 60 MM OD GI pipe is used for outer frame. 16 MM armed rope european quality with 6 steel cables inside fixed with various aluminiumconnectors is used for climbing activity. All the metal items would be pure polyester powder coated with dry thickness of 50-70 microns.complete to the satisfaction of engineer incharge. |
| 187 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. In all kind of soil upto 1.5m depth |
| 188 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. In all kind of soil upto 1.5m to 3.0m. depth |
| 189 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. In all kind of soil upto 3.0m to 4.5m. depth |
| 190 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. In all kind of soil upto 4.5 m to 6.0m. depth |
| 191 | Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 192 | Class M-150 brick work in 1:6 cement coarse sand mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 193 | Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) INcluding centering and shuttering and reinforcement. |
| 194 | Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 195 | 12mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand) |
| 196 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter |
| 197 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.Drilling of 300mm dia bore hole manually. |
| 198 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200mm nominal size dia |
| 199 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 200 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 201 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete as per direction of Engineer -incharge. |
| 202 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading& sizes as per actual requirement, all complete as per direction ofEngineer-in-charge. |
| 203 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge |
| 204 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge DSR 23.11.2 |
| 205 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of DSR 23.13 |
| 206 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.DSR 23.14 |
| 207 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). DSR 23.15 |
| 208 | Cost of Earth Filling |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
