Tender For Estimate For Providing And Fixing Of Open Gym Equipment For All Villages Of Kathura Block Kathuradistrict Sonipat, sonipat-Haryana

Tender For Estimate For Providing And Fixing Of Open Gym Equipment For All Villages Of Kathura Block Kathuradistrict Sonipat- 1 Estimate For Providing And Fixing Of Open Gym Equipment For All Villages Of Kathura Block Kathuradistrict Sonipat Dnit Cost:2074000 Lakhs 2 Air Swing: Providing, Designing And Fixing Of Airs Swinging Pair Of Size 1150X900x1250 Mm Fabricated With Main Post Of 140Mm Dia And 3.00 Mm Thick And Other Pipes Of 40Mm Dia 3.00 Mm Thick All Pipes Made Up Of Hot Rolled Tubular Ms Pipe And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Well Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Seat And Base Plate Cover Shall Be Made Up Of Virgin Lldpemanufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And Uv Resistant Environmental Friendly.Bearing Used Shall Be Maintained Free, Duly Oiled Sealed And Selflubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Each 14000.00 Fix The Equipment On To It And Cover Nuts Andbolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc 3 Pull Chair: Providing, Designing And Fixing Of Pull Pair Of Size 2500 X 800 X 2000 Mm Fabricated With Main Post Of 140Mm Dia And 3.00 Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Well Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber At Top End. Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-Incharge Regarding Material, Shape Of Equipment Colours On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc 4 Twister: Providing, Designing And Fixing Twister Of Size 1700 X1300 X 1300 Mm Fabricated 2’’X4’’ Rectangular Hollow Ms Pipe And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Well Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handlebars Are To Be Provided With High Quality Grip Rubber. Foothold Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Sel Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment Tobe Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc. 5 Double Cross Walker: Pipe- Structure Made Of Apollo Brand B Class Gi. Pipe Of 114 Mm Od 42 Mm Od And 32 Mm Od Connecting Pipe –Made Of Apollo Brand B Class Gi. Pipe Of 32 Od. Handle Frame - Made Of Apollo Brand B Class Gi. Pipe Of 42 Od. Handle Grip - Made Of Food Graded Rubber Bearing – Ball Bearing 6205Zz Bearing Caps - Made Up Of Hdpe Material 62 Mm Seats- Made Of Hr Sheet Of 2 Mm Thickness. Pole Caps – Made Up Of Hdpe Material. Flanges – 8 Mm Thick Powder Coated ( Thickness 90 Micron ) 6 Cycle: Pipe- Structure Made Of Gi. Pipe ( Is1239-2004 ) Of 4” Od 42 Od And 32 Od Of 3 To 4 Mm Thickness Arm – Structure Made Of Gi Pipe 32 Od 4 Mm Thickness. Bearing – Ball Bearing Foot Rest - Structure Made Of M.S. Sheet Of 2 Mm Thickness. Bearing Caps - Made Up Of Hdpe Material. Seats- Structure Made Of M.S. Sheet Of 3 To 4 Mm Thickness. Pole Caps – Made Up Of Hdpe Material. Paint – Powder Coated ( Thickness 90 Micron ) 7 Leg Press: Center Main Pipe114mm. B Class ( 3Mm To 3.5Mm. Thickness ) 2. Sitting Pipe 40Mm.B Class ( 3Mm To 3.5Mm. Thickness ) 3. Both Side Vertical Structure Pipe 40Mm. 4. Seat Metallic Sheet 3Mm To 3.5Mm. M.S 5. Footrest M.S Checked Plate 4Mm. Thickness 6. Permanent Lubricated Sealed Bearing Of Reputed Brand. 7. Nuts And Bolts Galvanized. 8. Nylon Covers For Covering The Nuts And Bolts 8 Push Up Bar: Minimum Order Quantity 1 Piece Usage / Application Only For Outdoor Use Material Gi, Mild Steel Automation Grade Manual Dimension 3900 X 1450 X 2350 Mm Max. User Weight 110 Kg Pipe Dimension – Main Post 140Mm Dia And Other Post 40Mm Dia. All Joint Shell Be Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment Tobe Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc

INR 1000 /-

INR 103700.0 /-

INR 20.74 Lakhs /-