}

Tender For Material Supply For Mgnregs Work Ward 11, Palakkad-Kerala

Local Bodies has published Tender For Material Supply For Mgnregs Work Ward 11. Submission Date for this Tender is 09-02-2024. Construction Material Tenders in Palakkad Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

41771061
Corrigendum : Tender For Material Supply For Mgnregs Work Ward 11
Open Tender
Indian
Kerala
Palakkad
09-02-2024

Tender Details

Material Supply For Mgnregs Work Ward 11 , Material Supply For Mgnregs Works , Quarry Waste , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coarse Sand (Zone Iii) , Fine Sand (Zone Iv) , Royalty For Good Earth , Royalty For Sludge , Portland Cement , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Twisted Steel/Deformed Bars , Solid Blocks Of Size 40X20x20cm , Solid Blocks Of Size 30X20x20cm , Solid Blocks Of Size 40X20x15cm , Solid Blocks Of Size 30X20x15cm , Solid Blocks Of Size 40X20x10cm , Hollow Blocks Of Size 40X20x20cm , Hollow Bloks Oof Size 40X20x15cm , Hollow Bloks Oof Size 40X20x10cm , Red Oxide Zinc Chromate Primer , Mild Steel Tubes Hot Finished Welded Type , Welding By Electric Plant , Galvanised Steel J Or L Hooks 8 Mm Dia , Bitumen Washer , G.I. Plain Washer Thick , Precoated Aluminium Trafford Sheet 0.450Mm Thick , Gi Trafford Profile Sheet 0.35Mm Thick , Mild Steel Round Bar Above 12 Mm Dia , Average Rate Of Mild Steel Round Bars For Reinforcements , Mild Steel Plates , Double Clip (Bridge Clip) , Single Clip , M.S. Tube 40 Mm Dia , Binding Wire , Galvanised Wire Mesh Of Average Width Of Aperture 1.4 And Nominal Dia. Of Wire 0.63 Mm , Wire Nails , Wire Mesh (Rabbit) , Mangalore Ridge Tiles 20 Mm Thick , Mangalore Tiles 20 Mm Thcik , Pvc Pipe 63 Mm Outer Dia . 6Kgf/Cm2 , Pvc Pipe 63 Mm Outer Dia. 4 Kgf/Cm2 , Pvc Pipe 110 Mm Outer Dia 6Kgf/Cm2 , Pvc Pipe 110 Mm Outer Dia. 4Kgf/Cm2 , Pvc Elbow 63 Mm Dia , Pvc 45 Degreeelbow 63 Mm Dia , Pvc Door Elbow 63 Mm Dia , Pvc Bend 63 Mm Dia , Pvc Tee 63X63x63 Mm Dia , Pvc Door Tee 63 X63x63mm Dia , Pvc Vent Cowl 63 Mm Dia , Pvc End Cap 63 Mm Dia , Pvc Socket/Coupling 63 Mm Dia , Pvc Reducer 63X50 Mm Dia , 63 Mm Pvc Ball Valve , Material - 75 Mm Mta , Material - 75 Mm Valve , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , Galvanised Steel Corrugated Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Roofing Paint For Iron Sheets In Red Colour , Solvent , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Flats Up To 10 Mm In Thickness , Mild Steel Round Bar 12 Mm Dia And Below , 200 Mm Aluminium Aldrop , 300 Mm Aluminium Aldrop , Pvc Corrugated Roofing Sheets , Pvc Plain Roofing Sheets , Stainless Steel Screws 50 Mm , Stainless Steel Screws 40 Mm , Stainless Steel Screws 30 Mm , Stainless Steel Screws 20 Mm , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessoriesand Flush Pipe) , Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished (Matt Finished) , Powder Coated M.S. Butt Hinges 100 Mm X58 Mm X 1.9 Mm , Bright Finished Or Black Enameled Mild Steel Screws 40 Mm , Bright Finished Or Black Enameled Mild Steel Screws 20 Mm , 100 Mm S.C.I. Trap With Vent Heel , White Vitreous China 10 Lit. (Full Flush) Capacity Controlled Low Level Flushing Cistern With All Fittings , Pvc Pipe 20 Mm Outer Dia 10 Kfg/Cm2 , G.I Limpet Washer , Green Net 75% Shade , Gi Chicken Mesh ( 24 Guage 12.5X12.5Mm)

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 06-02-2024 Date Extension Date 09-02-2024
2 30-01-2024 Date Extension Reg Date 05-02-2024

Key Value

Document Fees
INR 5000 /-
EMD
INR 50000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail