Annual Plan-218 / 24-Purchase Of Motor And Related Equipments For Pazhayi Lis-Purchase Of Motor And Related Equipments For Pazhayi Lis-General Electrical Work-2 OD290734/2023-2024:Supply of 3 phase 40 H P hp, 30 KW, squrre cage induction motor with horizondal split casing pump with CI body,Bronze impeller,SSshaft ,gland packed,coupled with motor having discharge of 78 LPS@28 mtrs head with common base plate etc as required. (Kirlosker ;UP-125/35/equivlent Deccan - Texmo) 3 OD290735/2023-2024: Supply ofpump controller with ammeter, volt meter, SSP for 3 phase 40 HP (relay range 45-75)motor pump set. ( L&T MU-G50 FASD suitable for 40 HP ). 4 90.17.7.8:Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :150 mm dia 5 OD290785/2023-2024:Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :125 mm dia 6 OD290793/2023-2024:Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :125mm dia 7 90.17.14.6:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :125mm dia 8 OD290736/2023-2024:Supply and providing 16 mm size nylon marine rope (garwar/equivlent mkae) for hanging the pump set in well, tying with an out side object as required. 9 90.14.24.9:Supply & fixingthe following Power Capacitors 3 phase delta connected in positon and giving connection.12.5 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors. 10 OD290737/2023-2024:Charges for the installation of above 40 hp 3 phasepump set into the existing foundationafter connecting the delivery pipes, with accessories and lead cables to motor complete in trouble free operation and conducting trial run satisfactorly. 11 90.6.4.54:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 4 Run 12 OD290851/2023-2024:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.25.00 sq.mm 3 Run 13 90.12.41.20:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 25 sq mm with factory made clamp 14 OD290852/2023-2024:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.25.00 sq.mm 4 Run 15 9.1.20:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm) 16 90.12.24.4:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 17 90.12.24.6:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.25 sq mm 18 OD290886/2023-2024: Supplying and providing copper earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with eachsize of glands for the following sizes of cables as required.25sqmm-95 sq mm with 12 mm wide x 1 mm thick clip 19 OD290890/2023-2024:Supply and providing 2.mm thick 3.3KV synthetic elesromeric fire retardent insulating sheet in front of main board etc asrequired. 20 OD290992/2023-2024:Steel reinforcment work fo RCC work including straightening,cuttung bending and placing in position with binding etc as required. 21 OD290891/2023-2024:Supply and providing junction box -Sintex make GS JB 2525/equivlent on surface/recess and making good the damages ,colour washing etc as required . 22 90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm 23 OD290827/2023-2024:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required40 mm 24 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board 25 90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame) 26 90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. 27 90.14.3.1:Supply and providing heavy duty A section neoprene gasket in the panel boardA section neoprene beeding suitable for 1.60/ 2.00 mm sheet 28 OD290739/2023-2024: supply and providing dry run protection relay curren based in the existing starter and giving conection etc as required (L&T make i-AD 29 90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size 30 OD290740/2023-2024:od158324/2021_2022 : Supply and providing surge protection devise conforming to IEC61643 with type 2,limp 12.5KA,Imax50KA 3P+N (4 pole) and fixing the same in the existing enclosure with DIN and giving connection as required 31 OD290742/2023-2024:Supply and fixing LED indicator, Blue colour, AC/CD 22.5mm cut out dia in the existing panel board and giving connection complete 32 OD290743/2023-2024:Supply and fixing LED indicator, red, green, black, yellow, orange colour, AC/CD 22.5mm cut out dia in the existing panel board and giving connection complete 33 5.1:Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. 34 OD290744/2023-2024:Supply and providing Test joint for earthing made up of 2 nos, 25x5 mm GI strip, 25 cm long placed on either sides of earth leads and watering pipe, bending, drilling and tightening with 4 sets of brass/SS nut, bolt, washer etc as required. 35 90.16.2.1:Supply and laying of the following sizes of B class GIpipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class) 36 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) 37 90.16.1.5:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG) 38 90.16.2.2:Supply and laying of the following sizes of B class GIpipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.20 mm dia. G.I pipe ( medium class) 39 90.16.3.2:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm GI strip 40 90.16.5.5:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG) 41 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) 42 OD290745/2023-2024:Supply and providing 25X3 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required. 43 OD290746/2023-2024:Supply and providing 25X6 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required. 44 OD290749/2023-2024:Supply and fixing the following accessories in the existing board and giving connections etc.63A HRC Fuse Base with 25AHRC Fuse link 45 OD291251/2023-2024:Dismantling the exising electric connection to themotor pump set main board,dismantling the suction and delivery pipeof 40 HP motor pump set including non return valve,wheel valve,vacuum pump conection etc without damage and dismantling the foundation nut and lifting the same using trypord and shifting to the newly constructed room adjoining to he pump house etc as stand by motor pump set. 46 OD290750/2023-2024:Charges for preparation of application and test report for KSEB connection 47 14.6:Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres. 48 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). 49 14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels. 50 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels
