Supply Of Refrigerated Centrifuge, peechi-Kerala

Supply And Installation Of Refrigerated Centrifuge , Refrigerated Centrifuge , Technical Specifications For Supply And Installation Of Refrigerated Centrifuge 1. Type And Make: Refrigerated Benchtop Centrifuge • Aerosol Tight Fixed Angle Rotor With Capacity To Accommodate A Minimum 20 Numbers Of 1.5 / 2 Ml Microfuge Tubes To Be Supplied With Centrifuge • Adaptor Sets For 0.2Ml Pcr Tubes And 0.5Ml / 0.6Ml Microlitre Tubes To Be Supplied • Instrument Should Have Option For Easily Changing Rotor To Swinging Bucket, And Or Microplate Or Fixed Angle Rotor ( 15 / 50Ml Tube ) At Later Stage • Must Have Wide Temperature Range Of -11°C To + 40°C ( Refrigerated ) , Which Can Be Adjustable During The Run Operation • Must Be Able To Maintain At 4°C At Max. Speed. • Max Speed Of More Than 12, 000 Rpm, Max Rcf More Than Of 20, 000G • Centrifuge Must Have A “Fast Cool” Function Where Cooling Process Can Be Shortened • Must Have Automatic Temperature Start Up At A Specific Time To Automatically Pre- Prepare Temperature Before Centrifugation • Acceleration Time To Maximum Speed Must Be Less Than 14S For All Rotors At Max Load And A Deceleration Time Of Less Than 15S With The Standard1.5 / 2Ml Rotor, But Has Option To Accelerate And Decelerate Gently For Sensitive Samples Using Specific Key. • Centrifuge Should Have Running Time Option For Continuous Run • Power Requirements: 230V, 50-60 Hz, If Stabilizer Is Required It Must Come With Instrument 2. General Features: • Must Have Digital Display Of Time, Speed And Temperature • Programmable Time And Speed Using Jog Dials / Keypad • Must Be Able To Store 50 Routine Procedures With 5 Programmable Buttons For Frequently Used Programs In The First Level • Able To Switch Display Between Rcf And Rpm Speed Setting • Separate Short Spin Key • Low Noise Levels Less Than 63Db At Max Speed • Brushless Maintenance Free Drive • Automatic Motorised Locking When Lid Almost Closed 3. Safety Features: • Iec 61010-2-020 Or Ce / Ul Certified For Safety And Compliance With International Standards • Rotor Should Be Made Of Anodised Aluminium To Ensure Chemical Resistance • Chamber Must Be Of Stainless Steel Material • Any Rotors, Caps, Buckets And Adaptors Supplied Must Be Must Be Autoclavable At 121°C For 20Min To Completely Eliminate Any Contaminating Material • Aerosol Tightness Should Be Certified By External Body • Automatic Imbalance Detection • Automatic Rotor Recognition • 2-Point Lid Screwing For Maximum Security Even At High Speed Centrifugation • It Should Have Built-In Condensation Drain To Eliminate Excess Water To Prevent Corrosion. • Should Use Cfc Free Refrigerant 4.Warranty - Two-Year Comprehensive On-Site Warranty ( Minimum ) . 5. Documentation Should Include User / Technical / Maintenance Manuals, List Of Important Spares And Accessories With Their Part Number And Price And List Of Recent End-Users In Centrally Or State Funded Research / Academic Institutes In Kerala Or Other Parts Of India. 6.Readily Available Service Support Based In Kerala From Manufacturer ( Support Document To Be Submitted From Manufacturer Side ) 7.The Vendor Needs To Provide The Address Of Certified And Authorized Service Center For The Quoted Equipment In / Nearest To Thrissur, Kerala. 8.The Equipment Should Be Installed, Tested And Demonstrated On-Site At The Requested Location By Authorized Service Agents Of The Manufacturer / Vendor. 9.The Equipment Should Be Delivered At Kfri Sub Centre, Kuzhur, Kakkulissery, Kuzhur P. O. Thrissur, Kerala – 680734.

INR 1200 /-

INR 6000.0 /-

INR 6 Lakhs /-