Tender For Annual Tender Of Maintenance Works Of Streetlight Department For Shirdi Municipal Council For 2024-25, shirdi-Maharashtra

Annual Tender Of Maintenance Works Of Streetlight Department For Shirdi Municipal Council For 2024-25-1.01 Removal Of Tubular / Iron Girder / Octaya Gal / Cement Pole N.P. Submitting To Godavun. 1.02 Erection Of Tubular Type Poles In Concrete Groups ( Excluding Poles With Concrete Material ) 1.03 Erecting Bunch Conductors And Stays By Filling Iron Girder ( I Sexton ) / Cement Poles With Concrete Groups ( Excluding Poles With Concrete Material ) 1.04 Octagonal Type Poles Fixed With Concrete Foundation Nut Bolts ( Excluding Poles With Concrete Material ) 1.05 Erecting Iron Girder ( I Section ) / Cement Poles Filled With Concrete Groups ( With Poles With Concrete Material ) 1.06 Erection Of Tubular Type Poles In Concrete Groups ( Including Poles With Concrete Material ) 1.07 Octagonal Type Pole With Concrete Foundation Nut Bolted ( With Pole With Concrete Material ) 1.08 Erecting Of Vehicle-Impacted Tubular Type Poles In Concrete Groups ( Including Poles With Concrete Material ) 1.09 Erection Of Octagonal Type Poles Driven By Vehicle With Concrete Foundation Nut Bolts ( With Poles Of Concrete Material ) 1.1 Cutting And Repairing Corroded Street Light Poles And Erecting Them In Concrete Groups ( Including Poles With Concrete Material ) . 1.11 Octagonal Street Light Pole Bracket Installation ( With Bracket ) 1.12 Tubular Street Light Pole Bracket Installation ( With Bracket ) 1.13 Street Light Bracket With Bhitine Bracket 1.14 Cabling Without Street Light Pole Fir Box, Mcb, Bus 1.15 Street Light Pole Earthing ( With 40 Mm Gi Pipe, Gi Wire, Nut Bolt ) 1.16 Installation Of Studs / Stays For Poles ( Concrete Material With Poles And Studs ) 1.17 3-Phase Overhead Service Wire For Tube / Lamp On Pole 1.18 Wire Drawing Of 1-Phase Overhead Service For Tube / Lamp On Pole 1.19 Underground Cable Laying, Splicing Etc. ( With Double Wall Corrugated Pipes Wdc Of Hdpe With Three Feet Deep Excavation ) 1.2 Ht / Lt Shifting Of Electric Poles ( I Section Girder / Cement Pole / Tubular ) . Removal From One Site And Re-Erecting At A New Site And Re-Installation Of Electrical Supply ( Including Electrical Conductors, Connection Hole Fittings ) 1.21 Shifting Of Octagon Poles From One Location To Re-Erection At New Locations And Re-Installation Of Electrical Supply ( Including Electrical Conductors, Connections, Deep Fittings ) 1.22 Painting Of Old Tubular, Girder Poles ( Silver Paint 2 Layers ) 1.23 Extension Of Concrete Foundation For Tubular / Girder Poles ( 2 Feet ) 1.24 Rcc Of Octagon Pole In Road Divider Designing And Casting M-20 Cement Concrete Foundation Suitable For Conical / Octagonal Poles For 10 To 12 M Long Considering The Safe Scil Bearing Capacity At Site As T / Sq M, 2 M Depth, Including Excavation, Foundation Nuts & Bolts Etc In Approved Manner ) 1.25 Numbering The Poles With Oil Paint. 1.26 Repairing And Painting Of Old Bent Eye Section Poles / Tubular Poles 1.27 Repair Of Fan / Lamp / Tube Minor Wiring In Building 1.28 House Wiring Per Point 1.29 Installation Of Tubes In Building 1.3 Replacement Of Cutout In Panel Box / Replacement Of Main Switch / Replacement Of Mcb Switch / Replacement Of Contactor / Replacement Of Timer Switch 1.31 Deep Fitting Or Shifting Of Panel Box ( With 63A, 100A Fuse ) 1.32 Fixing Energy Saver Panel With 3 Phase Material 1.33 Repairing 30 Hp Starter At Water Supply Station 1.34 Repair Of 3 / 5 / 10 / 30 / Hp Starter At Water Supply Center ​ 1.35 Start-Up Of 3 / 5 / 10 / 30 / Hp Motor At Water Supply Station By Making Minor Repairs In Case Of Shutdown 1.36 Starting By Fixing The Highmast Lamp On The Pole 1.37 Making Inverter Fittings And Supplementary Wiring For The Same 1.38 Installation Of Lamps / Street Lights On Poles / High Masts. 1.39 Sealing The Cable Joint ( With Water Proof Tape Matrial )

INR 1000 /-

INR 5000.0 /-

Refer document