Tender For 1 11 Kv Pin Insulator 10 Kn, Od 40 Mm Dia With Pin (Polymer Type) And Nut & Washer 2 11 Kv B&S Type Disc Insulator (Polymer Type) 70 Kn With H/W Fitting 3 Lightening Arrestor (9Kv 5Ka) Line Type (Polymer Type) 4 33 Kv Polymer Pin Insulators -Jharkhand

Tender For 1 11 Kv Pin Insulator 10 Kn, Od 40 Mm Dia With Pin (Polymer Type) And Nut & Washer 2 11 Kv B&S Type Disc Insulator (Polymer Type) 70 Kn With H/W Fitting 3 Lightening Arrestor (9Kv 5Ka) Line Type (Polymer Type) 4 33 Kv Polymer Pin Insulators 10 Kn With Gi Pin 5 Spike Earthing Made Of 20Mm Gi Solid Rod 6 Rod Type Earthing (25 Mm Dia Ms Rod 3 Mtr Long) 7 Lt Pre Insulated Mid Span Joint Suitable 50 Mm2 Phases 8 Lt Pre Insulated Mid Span Joint Suitable 120 Mm2 Phases 9 Lt Pre Insulated Mid Span Joint Suitable 70 Mm2 Phases 10 Insulation Piercing Connector-Type-Ii (Main 16-95 Mm2 & Tap 16-95 Sq Mm) 11 Insulation Piercing Connector Branching Suitable For T Joints 12 Ace Chemrod ( Artificial Concept Of Earthing By Chemical Rod ) :- Ace Chemrod Earthing Electrode (Consisting Mild Steel Galvanised Pipe Of Size 2500 Mm In Length X 48 Mm Outer Dia. X 2 Mm Thick, Ms Rod Of Size 2575 Mm X 16 Mm Be Welded With Bottom. The Epoxy Insulator Of Not Less Than 100 Mm Length Is To Be 13 Stone Base plate for 11 KV line, DSS, LT 14 11 KV H.G. Fuse unit (polymer type) 15 GI stay set complete for D/s/s (1900x 20mm) with staywire 7/10 SWG and Guy insulator 16 Stay Set complete (1800x20mm) with stay wire 7/10 SWG & Guy Insulator (Galvanised) 17 11 KV Stay Set Complete (1800x16 mm) with stay wire 7/10 SWG and guy insulator 18 Stainless Steel Strip of 20mmX1mmx1000mm with Buckle Clip 19 Eye Hook 20 Danger Board 11KV 21 Danger Board 33KV 22 P G clamp for 150mm2 23 P G clamp for 50mm2 24 Aluminium binding wire 25 Anticlimbing Device(Barbed wire) 2x12 SWG 26 Suspension Clamp Suitable for 95 -150 Sqmm Bare Messenger (Including 1 No. Suspension Clamp with Bracket + 1.5 Mtr SS Strap + 2 Nos. SS buckle) 27 Suspension Clamp Suitable for 35 -95 Sqmm Bare Messenger (Including 1 No. Suspension Clamp with Bracket + 1.5 Mtr SS Strap + 2 Nos. SS buckle) 28 Suspension Clamp Suitable for 25 -70 Sqmm BareMessenger (Including 1 No. Suspension Clamp with Bracket + 1.5 Mtr SS Strap + 2 Nos. SS buckle) 29 Dead End Clamp Suitable for 95 -150 Sqmm Bare Messenger (Including 1 No. Dead End Bracket + 1 No. Dead End + 1.5 Mtr SS Strap + 2 Nos. SS buckle) 30 Dead End Clamp Suitable for 70 -95 Sqmm Bare Messenger (Including 1 No. Dead End Bracket + 1 No. Dead End + 1.5 Mtr SS Strap + 2 Nos. SS buckle) 31 Service main anchor clamp for proper support of service cable 32 Spring loaded CP multi conn bus-bar in insulated box Single Phase 1 in 9 out (Dist. Box for fixing on pole suitable for AB XLPE Cable) 33 Spring loaded CP multi conn bus-bar in insulated box Single Phase 1 in 6 out (Dist. Box for fixing on pole suitable for AB XLPE Cable)

INR 11800 /-

INR 190000.0 /-

Refer document