|
| 1 | Distn. wring in 1.5 sq. mm single corestranded \"FR\" PVCinsulated & unsheathed copper wire (Brand approved by EIC) in 19mm bore, 3mm thick polythen pipe complete with allaccessories embedded in wall to light/ fan/ call bell point with Modulartype switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. |
| 2 | 2x1.5(Ph. & N) and 1 x 1.5 as ECC. |
| 3 | Light/ Fan point (Average run 10mtr). |
| 4 | 6A/10A 5pin plug point with 6A/10A 3pin/ 5pin socket and Modular type switch MI Modular switch board Modular top cover (On Board). |
| 5 | Supplying & Fixing 240 V AC/DC superior type Multitune ( min 10 nos. tune) Call Bell (Anchor) with selector switch for single/Multi Tunes mode, Battery operated on HW board incl. S&F HW board |
| 6 | Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works |
| 7 | 25 mm dia 3 mm thick polythene pipe without earth continuity wire |
| 8 | Supply and fixing GI modular Switch Boardof the following sizes complete withthree no. suitable size Cu bar with holes ( for P, N & E) fixed on bakelite/hard rubber insulator over the MS welded chair incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, paint and mending good the damages: |
| 9 | 6 modules |
| 10 | 8 modules |
| 11 | 12 modules |
| 12 | 18 modules |
| 13 | Supply & Fixing 240V, 16A, 3 pin Modular type plug socket (Brand approved by EIC) without plug top on GI Modular type switch board with 3Module top cover plate flushed in wall incl. S & F switch board and cover plate making necessary connections with PVC Cu. wire and earth continuty wire etc. |
| 14 | 16A Socket |
| 15 | Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire |
| 16 | 19mm dia 3mm thick Polythene Pipe |
| 17 | Supplying and drawing 1.1 KV single core stranded \"FRLS\" PVC insulated & unsheathed single core stranded copper wire of following sizes in the polythene pipe and making necy. connection as reqd. |
| 18 | 2x2.5(Ph. & N) and 1 x 1.5 as ECC |
| 19 | 2x4.0(Ph. & N) and 1x2.5 as ECC |
| 20 | 2x6.0(Ph. & N) and 1x4 as ECC |
| 21 | Supplying and fixing sheet metal inspection box (16SWG) of the following sizes finished in slab during casting/wall by housing the same after cutting brick wall incl. making earthing attachment, painting, finished with suitable size top cover of bakelite/ perspex and brass screw and mending good damages to building works. |
| 22 | 100mm x 100mm x 65mm |
| 23 | 150mm x 100mm x 65mm |
| 24 | 175mm x 100mm x 65mm |
| 25 | Supplying and fixing double door SPN MCB Distribution board with IP-42/43 protection,concealed in wall after cutting the wall and mending good the damages to original finish incl. S & F incomming and outgoing isolator/MCB incl. interconnection with suitable size of copper wire and neutral link & provision for earthing attachment. (ABB -Make) |
| 26 | 2+8 Way/ 10 Way Ddouble Door SPN MCBDB. |
| 27 | Dismantling and taking out the defective electrical accessories from different room by engaging skilled technician and unskilled labour as per direction. |
| 28 | Supply, delivery and storage of the following materials at site as per sample: |
| 29 | 50 watt LED PCB plate for decorative pole [Make: Philips/ Havells/ Any approved] Riverine charges @ 5% included |
| 30 | 240 Volt, 50 Hz AC,50 watt Driver for top post light luminaries[Make: Philips/ Havells/Any approved] Riverine charges @ 5% included |
| 31 | Bollard PCB Plate light (R20L112B9C CROM) Riverine charges @ 5% included |
| 32 | Bollard PCB Plate light driver (R20L112B9C CROM) Riverine charges @ 5% included |
| 33 | 240 Volt, 50 Hz AC,5-7 watt Driver for 7 watt LED panel light luminaries[Make: Philips/ Havells/Any approved] Riverine charges @ 5% included |
| 34 | LED type flexible srip light with driver for cove lighting 5 meter in each strip, Colour Blue/ Green/ Worm white [Make: Philips] Riverine charges @ 5% included |
| 35 | 1050/1200mm sweep 5 star rated 230 volt 50Hz AC ceiling fan [Make: Havells/ CG/ olar] Riverine charges @ 5% included |
| 36 | 6 A One Way Switch [Make: Anchor Roma] Riverine charges @ 5% included |
| 37 | 6 A socket [Make: Anchor Roma] Riverine charges @ 5% included |
| 38 | 10 A One Way Switch [Make: Anchor Roma] Riverine charges @ 5% included |
| 39 | 16 A socket [Make: Anchor Roma/] Riverine charges @ 5% included |
| 40 | 2.5 sq. mm. PVC insulated fiexible multistrand copper wire as per IS : 694 As Amended Up To Date [Make:Havells] Riverine charges @ 5% included |
| 41 | 4 core16 SQ mm aluminium armoured cable [Make:Havells] Riverine charges @ 5% included |
| 42 | RCC Column for street light pole sized 450mm x 450 mm x 1700mm with PaintingRiverine charges @ 5% included |
| 43 | (6-32 )Amps SP MCB, 10 KA [Make: Havells/] Riverine charges @ 5% included |
| 44 | 32 Amps DP MCB, 10 KA [Make: Havells] Riverine charges @ 5% included |
| 45 | 2.25 MF/ 2.50 MF fan capacitor of any approved make Riverine charges @ 5% included |
| 46 | Battery for AC & TV 1.5 Volt [Make: Any approved] Riverine charges @ 5% included |
| 47 | Battery for Wall clock 1.5 Volt [Make: Any approved] Riverine charges @ 5% included |
| 48 | Surface mounted LED luminaries suitable for 1 x 1 grid ceiling in combination with profiled and flat defuser , colour: White/ Grey [Make: Philips] Riverine charges @ 5% included |
| 49 | Fitting fixing of the above supplied materials as in Sl. No. 12 and departmebntal supplied additional materials by engaging skilled personnel as per direction with connection complete and testing commissioning the same upto the entire satisfaction of the EIC. |
| 50 | Supply, delivery and fitting fixing of voltage correction device suitable for operation in input voltage from 130 volt to 290 volt with output voltage 230 volt ±1%for 1.5 TR AC machine at different bungalow at Ganga Sagar [Make V-Guard Industries Ltd.] |
| 51 | Add GST @ 18% |
