Tender For Up Gradation Of Chc Tholur At Thrissur District; 1 Civil Works 2 2.31 : Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared 3 15.7.4 : Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar 4 15.23.1 : Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm 5 15.57 : Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Metres Lead As Directed By Engineer - In-Charge 6 15.52 : Dismantling Of Flushing Cistern Of All Types ( C.I. / Pvc / Vitrous China ) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 7 15.13.1 : Taking Out Doors, Windows And Clerestory Window Shutters ( Steel Or Wood ) Including Stacking Within 50 Metres Lead:Of Area 3 Sq. Metes And Below 8 Od236117 / 2022_2023 : Engaging Skilled Or Unskilled Labour For Specified Work As Per Site Requirements As Instructed By Engineer In Charge 9 50.6.1.4 : Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 30X20x20cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Foundation And Plinth With Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement : 6 Coarse Sand ) Etc Complete 10 50.6.1.5 : Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 30X20x20cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement : 6 Coarse Sand ) Etc Complete 11 5.2.2 : Reinforced Cement Concrete Work In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Up Tot Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 12 5.9.1 : Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Foundations, Footings, Bases Of Columns, Etc For Mass Concrete 13 5.9.5 : Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers 14 5.22A.6 : Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo - Mechanically Treated Bars Of Grade Fe-500D Or More 15 13.1.1 : 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand ) 16 14.1.1 : Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq Meters And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground Within 50 Meters Lead:With Cement Mortar 1:4 ( 1 Cement : Fine Sand ) 17 22.5 : Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : A ) First Layer Of Slurry Of Cement @ 0.488 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. B ) Second Layer Of Slurry Of Cement @ 0.242 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. 18 Od129077 / 2023_2024 : Providing And Full Body Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.<Br>Size Of Tile 600 X 600 Mm. 19 11.41.2 : Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 600 X 600 Mm. 20 Od236292 / 2022_2023 : Providing And Laying Vitrified Wall Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 12 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.<Br>Size Of Tile 500X500 Mm. 21 11.38 : Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) , Of Ist Quality Conforming To Is : 15622, Of Approved Make, In All Colours, Shades, Except White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Bed Of Cementmortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. 22 8.31 : Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineerin-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 23 8.2.2.2 : Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror, Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations, Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels.Area Of Slab Over 0.50 Sqm 24 13.88 : Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 25 22.24A : Providing & Applying High Quality Acrylic Modified Resin Based Texture Of Dholpur / Red Sand Stone Pattern With Anti Algae And Uv Resistance Properties To Be Applied As Intermediate Finish In Desired Pattern @ 43.04 Kgs / 10 Sqm To Form Film Of 1- 1.5 Mm Thickness After Scrapping And Properly Cleaning The Surface To Remove Loose Particles From The Plaster Surface, Followed By Top Coating With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade By Two Or More Coats @ 1.43 Litres / 10 Sqm, Complete As The Direction Of Engineer -In-Charge 26 13.26 : Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 27 13.48.1 : Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications:Two Or More Coats Applied On Walls @ 1.25 Ltr / 10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr / 10 Sqm 28 13.48.2 : Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications:Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade.Two Or More Coat Applied @ 0.90 Ltr / 10 Sqm Over An Under Coat Of Primer Applied @ 0.75 Ltr / 10 Sqm Of Approved Brand And Manufacture 29 13.48.3 : Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications:Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade.Two Or More Coat Applied @ 0.90 Ltr / 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr / 10 Sqm Of Approved Brand And Manufacture 30 21.1.1.2 : Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) :For Fixed Portionpowder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 31 21.1.2.2 : For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 32 21.2.2 : Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides 33 Od238197 / 2022_2023 : Providing And Fixing 3 Mm Thick Acp Sheet In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Base Frame Work For Acp Should Be Paid Seperately Under Relevant Gi Or Aluminium Item. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.<Br> 34 21.3.2 : Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) :With Float Glass Panes Of 5.50 Mm Thickness 35 9.83 : Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm ) , With Necessary Accessories And Screws Etc. Complete. 36 21.16.3 : Providing And Fixing Aluminium Round Shape Handle Of Outer Dia 100 Mm With Ss Screws Etc. Complete As Per Direction Of Engineer-In-Charge.Polyester Powder Coated Minimum Thickness 50 Micron Aluminium 37 9.82 : Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete. 38 9.79.2 : Providing And Fixing Special Quality Bright Finished Brass Cupboard Or Ward Robe Locks With Four Levers Of Approved Quality Including Necessary Screws Etc. Complete.50 Mm 39 9.115 : Providing And Fixing Powder Coated Telescopic Drawer Channels 300 Mm Long With Necessary Screws Etc. Complete As Per Directions Of Engineer -In-Charge. 40 9.123 : Providing And Fixing Factory Made Door Frame ( Single Rebate ) Made Out Of Single Piece Extruded Solid Pvc Foam Profile With Homogeneous Fine Cellular Structure Having Smooth Outer Integral Skin Having 62 Mm Width & 32 Mm Thickness, Frame Will Be Mitred & Jointed With Self Driven Self Tapping Screws Of Size 38 Mm X 4 Mm & Pvc Solvent Cement, Including Fixing The Frame To Wall With Suitable Dia & Length Anchor Fastener As Per ManufacturerS Specification And Direction Of Engineer-In-Charge. 41 Od224393 / 2022_2023 : Providing And Fixing Factory Made 20 Mm Thick Door Shutter Made Of Solid Pvc Foam Profile.The Styles & Rails Shall Be Of Size 75 Mm X 20 Mm Having Wall Thickness 5 Mm.The Styles, Top & Bottom Rails Shall Have One Side Wall Thickness Of 15 Mm Integrally Extruded On The Hinge Side Of The Profile For Better Screw Holding Power.The Styles And Rails Shall Be Reinforced With M.S. Tubes Of Size 33 Mm X 17 Mm X 1 Mm, Painted With Primer, All Four Corners Of Reinforcement To Be Welded Or Sealed. Solid Pvc Extruded Bidding ( Push Fit Type ) Will Be Set Inside The Styles And The Rails With A Cavity, To Receive Single Piece Extruded 5 Mm Pvc Sheet As Panel.The Styles And Rails Will Be Mitred Cut And Joint With The Help Of Pvc Solvent Cement & Self Driven Self Tapping Screws.Single Piece Extruded Solid Pvc Lock Rails Of Sixe 100Mm X 30 Mm With Wall Thickness 5 Mm & 15 Mm Integrally Extruded In The Middle Of The Lock Rail & Fixed With Styles With The Help Of Pvc Solvent Cement & Self Driven Self Tapping Screws Of Size 100 Mm X 8 Mm Complete As Per Manufacturer&Apos;S Specifications And Direction Of Engineer -In-Charge.<Br>Decorative Finish ( Both Side Wood Grained Finish ) 42 10.2 : Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 43 10.28 : Providing And Fixing Stainless Steel ( Grade 304 ) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I / C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc. ) 44 50.10.1 : Steel Work In Built Up G I Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 45 26.19.1 : Providing At All Heights, Levels And Locations Aluminium Profile Industrial Troughed Sheet Of Alloy 31500 / 31000 / 40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I / C Cutting To Size And Shape Where Required As Per Specifications, Detail Drawings And Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealent Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses.0.71 Mm Thick, The Profile Detail Width 1044 / 920 Mm, Cover Width 1000 / 875 Mm. 46 Od109427 / 2023_2024 : Providing And Fixing On Sheet Square Rain Water Gutter Pipes Including Joining And Necessary Fittings 47 12.52.3 : Providing And Fixing Tiled False Ceiling Of Approved Materials Of Size 595 X 595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams Per Sqm, Both Side Inclusive ) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick ( Minimum ) Sheet, Spaced At 1200Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting / Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X 1.6 Mm Fixed To Ceiling With 12.5Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85X 30X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer -In-Charge.12.5 Mm Thick Square Edge Pvc Laminated Gypsum Tile Size 595X595 Mm Made Of Gypsum Plasterboard , Manufactured From Natural Gypsum As Per Is 2095 Part I And Laminated With White 0.16 Mm Thick Fire Retardant Pvc Film On The Face Side And 12 Micron Metalized Polyster On The Back Side With All Edges Sealed With The Face Side Pvc Film Which Goes Around And Wraps The Edges And Is Bonded To The Edges And The Back Side Metalized Polyster Film So As To Make The Tile A Completely Sealed Unit. 48 10.3 : Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40 Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Applying A Priming Coat Of Approved Steel Primer . 49 16.68 : Providing And Laying 60 Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M - 30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Fine Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. 50 Od224394 / 2022_2023 : Supplying And Laying Polyester, Washable And Stain Free Cloth ( Bio-Active Fabric<Br>Washable Germ Free Suitable For Sterile Area ) Curtain System With Maximum Curtain Cloth Height 230 Cm ( Top<Br>30 Cm White Colour Net And 200Cm Light Blue Color As Per Approval ) Stitching With Stiffener Tape, Pleats, <Br>Ironing And Laying Around Each Bed Using Pvc Runner With Hooks & Stopper For Hanging / Sliding Etc. As Per<Br>The Direction Of Engineer In Charge Including Conveyance To Site, Laying In Line And Level, Sealing All Cutting In<Br>False Ceiling With Powder Coated Ms Cup, All Leads And Lifts Including All Labour Charges Etc. Complete.<Br> ( Unpleated Length Of The Cloth Measurement Will Be Considered For Payment Also The Bottom And Top Foldings Will Not Be Considered In Cloth Measurement ) / Supplying And Fixing Powder Coated 20Mm Dia. Gi Round Tube<Br>Hanging Support Of Required Length ( App. Length 1.10M ) One End Fixing From Slab By Using 6Mm Dia Expansion<Br>Bolt At A Distance Not More Than 2M, C / C Down End Fixed To Powder Coated Aluminium Channel Frame 45 X<Br>20Mm X 1Mm Thick Section By Using Ss Screw As Per The Direction Of Engineer In Charge Including<Br>Conveyance.<Br> 51 Od236833 / 2022_2023 : Supply And Fixing Of Signage In Vinyl Foam Sheet With Lettering. All Fixing Arrangements Using Fasteners Stainless Steel Screws Etc. As Per Design At The Required Locations As Directed By Engineer In Charge. Rate Inclusive Of All Materials And Labour Charges. Scaffolding Etc. Sign Board Size ( 15 X45 Cm ) 52 Od107436 / 2023_2024 : Supply And Installation Of Steel Rack Of Size 180X65x30 Cm With 4 Racks And Including Fittings As Required 53 Od105879 / 2023_2024 : Supply And Fixing Of Wooden Rack For Pharmacy Of Size 180X180x60 Mm 54 Od236895 / 2022_2023 : Refrigerant Piping ( Suction & Discharge ) <Br>Supply, Installation, Testing And Commissioning Ofrefrigerant Piping ( Suction & Discharge ) Hard Drawn From Hard Copper Tube Of Suitable Sizes With Copperelbows, Tees Etc. As Required. The Brazing To Be Carried Out With Bleeding Of Nitrogen. The Copper Pipe Tobe Insulated With 9 Mm Thick Nitrile Rubber Sleeves Etc., As Required. 55 Plumbing 56 50.18.8.2.1 : Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chased And Making Good The Wall Etc. 20 Mm Pipe 12 Kgf / Cm2 57 50.18.8.3.1 : Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 25 Mm Pipe 12 Kgf / Cm2 58 50.18.9.6.2 : Providing And Fixing Pvc Pipes Includings Jointing Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 50 Mm Dia 6 Kgf / Cm2 59 50.18.9.7.2 : Providing And Fixing Pvc Pipes Includings Jointing Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.63 Mm Dia 4 Kgf / Cm2 60 50.18.9.9.2 : Providing And Fixing Pvc Pipes Includes Joints Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 110 Mm Dia 4 Kg / Cm2 61 17.2.1 : Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 62 50.17.1.4 : Supplying And Fixing Cp Health Faucet Good Quality Including Cost Of Materials And Labour Charges Etc. Complete As Per The Direction Of Site Engineer-In-Charge. 63 17.7.3 : Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 64 17.28.1.1 : Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete.Semi Rigid Pipe32 Mm Dia 65 18.50.1 : Providing And Fixing C.P Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms.15 Mm Nominal Bore 66 18.58.2.1 : Providing And Fixing Ptmt Grating Of Approved Quality And Colour.Rectangular Type With Openable Circular Lid150 Mm Nominal Size Square 100 Mm Diameter Of The Inner Hinged Round Grating 67 Electrical 68 1.10.3 : Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Group C 69 1.14.1 : Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2x1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 70 1.14.2 : Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2x 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 71 1.14.3 : Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire 72 1.19 : Supplying And Drawing Co-Axial Tv Cable Rg-6 Grade, 0.7 Mm Solid Copper Conductor Pe Insulated, Shielded With Fine Tinned Copper Braid And Protected With Pvc Sheath In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 73 1.24.3 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15 / 16 Amp Switch 74 1.24.5 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15 / 16 Amp Socket Outlet 75 90.10.3.15 : Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required ( Rohs Compliant ) 76 90.10.1.5 : Supply & Fixing The Following Types / Sizes Of Boxes Suitable For Modular Accessories In Surface / Recess Including Making Good The Damages, Colour Washing Etc As Required ( Rohs Compliant ) 77 1.24.7 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.Tv Antenna Socket Outlet 78 1.27.2 : Supplying And Fixing Following Size / Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module ( 100Mmx75mm ) 79 1.27.4 : Supplying And Fixing Following Size / Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module ( 200Mmx75mm ) 80 1.24.1 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5 / 6 Amps Switch 81 1.24.4 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.3 Pin 5 / 6 Amp Socket Outlet 82 2.10.1 : Supplying And Fixing 5 Amps To 32 Amps Rating, 240 / 415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 83 90.10.1.3 : Supply & Fixing The Following Types / Sizes Of Boxes Suitable For Modular Accessories In Surface / Recess Including Making Good The Damages, Colour Washing Etc As Required ( Rohs Compliant ) 84 1.28.4 : Supplying And Fixing Following Modular Base & Cover Plate On Existing Modular Metal Boxes Etc. As Required.6 Module 85 1.25 : Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 86 1.28.2 : Supplying And Fixing Following Modular Base & Cover Plate On Existing Modular Metal Boxes Etc. As Required.3 Module 87 2.3.5 : Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcbirccb / Isolator2+4 Way, Double Door 88 2.4.2 : Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 Volts, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) 6 Way ( 4 + 18 ) , Double Door 89 2.10.2 : Supplying And Fixing 5 Amps To 32 Amps Rating, 240 / 415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole And Netural 90 2.13.2 : Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63 Amps 91 2.13.1 : Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 92 2.12.1 : Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 93 2.15.2 : Supplying And Fixing Following Rating, Four Pole, ( Three Phase And Neutral ) , 415 Volts, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 94 90.12.7.43 : Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armoured Aluminium Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages , Colour Washing Etc. As Required. 95 90.16.1.3 : Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required 96 1.50.1 : Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage Connection Testing, Commissioning Etc. As Required.Upto 450 Mm Sweep 97 Od224388 / 2022_2023 : 20Wled Tube Type Fixture<Br>Sitc Of Modular Type 20Wled Tube Type Fixture Directly On To Wall Including Drilling And Fixing, Making Necessary<Br>Connections And Make As Approved By Engineer In Charge Or Electrical Engineer. 98 Od130471 / 2023_2024 : Od233467 / 202 0_2021 :2X2squaretyperecessmountedledlight<Br>Sitcof600mmx600mm Square Type Cool White, Warm White, Pure White Led Light Fixture With Integrated Driver & Backlight Technology With A Minimum System Efficacy Of 95W / Lm, Standard Cct: 3000K*, 4000K & 6500K, High Color Rendering Cri >80, With High Efficiency Driver, Minimum Of 35000 Hours Working Life, And Surge Protection -4Kv ( Light Variant As Decided By Engineer In Charge ) , Including Connection With Existing Point Using Suitable Gauge Copper Conductor Directly To The Ceiling Rose. Each Module Should Be Tested And Qc Approved By Competent Authority And The Same To Be Furnished Before Electrical Engineer 99 Od224389 / 2022_2023 : 1200Mmsweep-Ceilingfan Completewith Servicevalue Minimum4.0 ( Cub Meter / Minute / Watt ) , Airdeliveryminimum 210 ( Cubicmeter / Minute ) , 300Mm Down Rod , 2 Number Canopies, Shackele Kit, Copper Winding, 3 Number Blades And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers Suitable For<Br>230V / 240V Single Phase Ac Supply Etc. Complete As Required 100 Od234103 / 2022_2023 : 2 Ton Inverted Split Ac Conditioners Suitable For Wall Mounting Work On 230 Volts, 50Hz , Spac Power Supply With Matching Capacity Stabilizer, Refrigerent -R- 134A / R-410A, Noise Level- Less Than 35Db Mounting / Fitting Indoor And Outdoor Units Units At Respective Locations As Per Standard Practice Including Leak Testing And Additional Refrigerent Charge If Required, Insulation Of Minimum 13Mm Thickness Nitride Rubber With Aluminum Foil Covering Along With Required Electrical And Control Cabling As Per Standard Practice. Supply And Laying Of 35Mm -40Mm Dia Pvc Drain Piping As Per Standard Practice Including U Trap Per Each 101 Od238219 / 2022_2023 : Supply And Fixing Of Exhaust Fan
