Tender For Supply, Erection, Testing, Trial Run And Commissioning Of Vertical Axial Flow Pump 15 Hp In Assistant Director Of Agriculture Ramankary, Ramankary P.O, Muttar,Alappuzhadistrict Under Janakeeyasoothranam Block Panchayath Scheme 2023, Alappuzha-Kerala

Supply, Erection, Testing, Trial Run And Commissioning Of Vertical Axial Flow Pump 15 Hp In Assistant Director Of Agriculture Ramankary, Ramankary P.O, Muttar,Alappuzhadistrict Under Janakeeyasoothranam Block Panchayath Scheme 2023 , Supply, Installation, Testing, Trial Run And Commissioning Of Submersible Vertical Axial Flow Pumpset With The Specifications Listed Below, Suitable For Handling Fresh And Silty Water With Rpm 960 (Syn) Or Less. The Material Of Construction Of The Casing, Suction Bell Shall Be Cifg 260 With 2% Nici, Impeller Cf8m (Ss) With Ss 316 Or Asi 410 Shaft And Vertical Submerged Column Pipe And Delivery Pipe (Varies From 5 To 10 M Length As Per Site Conditions) Of Ms (Is 226) With 6 Mm Minimum Thickness. A Metallic Non- Corrosive Strainer Of Mesh Size Not More Than 50 Mm X 50 Mm Should Be Fitted At Mouth Of Suction Column. Any Hanging Portion Of The Delivery Pipe Should Be Supported With Suitable Metallic Supporting Frames Or Rcc Pillars Of Suitable Size As Per Site Requirements. The Prime Mover For The Pump Should Be 3 Phase Tewc Squirrel Cage Submersible Induction Motor 415 V +/- 10%, 50 Hz +/- 5% Connection With Class “F” Insulation, Cubicle Type Panel Board With All Necessary Protection Units And Instrumentation. Auto Transformer Starter Of Reputed Make , Mccb Including Suitable Metering, Led Indications, Selector Switch, Single Phase And Dry Running Preventer, Suitable Capacitor Etc., Wiring And Earthing Should Be As Per Regulations And Specifications Of Kseb And Electrical Inspectorate. Suitable Water Proof, Copper Power Cable, About 20.00 M Length Or As Per Site Requirement. A Screen With 6 Mm Gi Welded Mesh With 50 Mm X 50 Mm Opening Size, (About 20 Sq M Area) Framed In Gi Angles And Gi Tubes Shall Be Fitted At The Openings On Top And Sides Of Sump To Prevent Entry Of Unwanted Materials To The Pump Through Inflow Water. The Rate Quoted Should Inclusive All The Charges For Supply, Installation Including Petty Civil Works, Trial Run And Commissioning, All Type Of Transportation And Conveyance, Loading And Unloading Charges, Factory Testing Etc. Excluding Gst , 1. Motor-15 Hp Verticle Mounter Motor , 960 Rpm , Squirrel Cage ( Direct Cupled With Pump), With Panel Board (As Per Kseb Norms) 2. Type Of Lubrication – Self - By Water / Grees 3. Meterial For Bend – Ss304 4. Meterial For Impeller – Ss304 5. Meterial For Pump Shaft – Ss304 6. Meterial For Delivery Pipe And Size – Ss304/250Mm Dia 7. Meterial For Suction Pipe And Size – Ss304/250 Mm Dia 8. Length Of Suction Column – 2 To 3 M (As Per The Site Condition) 9. Length Of Delivery Pipe 10. Meterial For Stainer – Ss304

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	29-12-2023	Revised Technical Specification	Technical Bid	06-01-2024

INR 2700 /-

INR 13500.0 /-

INR 13.50 Lakhs /-