Tender For Supply Of Refrigerator, Bangalore-Karnataka

Tender For Supply Of Refrigerator Specification of Refrigerator System should be vertical standing and should have working volume of 700 Ltrs +/-5% The system should have Microprocessor based PID controller it should have LED display with button control panel and user-friendly control system with chart recorder samples which requires a stable temperature thickness 65 mm The system should be high power efficient and have high grade thermal Insulation the freezer inspection from factory to be supplied with system. submitted with this offer The system should have suitable LED display for temperature. The system should be a research grade and suitable for continuous operation The system should be certified for research grade as per norms of IS & CE or equivalent and suitable for continuous operation The system should have minimum 4 adjustable shelves for storage of sample and easy access. The system should have electronically monitored cycle defrost which should minimize the temperature fluctuations during the defrost cycle. The system should have a temperature range of 2°C to 23°C, which should be ideally suited for magents and biological The required set temperature will be 4°C and the temperature variation should not be less than 0.5°C The system should be supplied with suitable safety lock The system should have double pene glass viewing door The system should have audio & visual alarms for low high temperature, door open and power failure. The system should be high power efficient, have high grade thermal puf insulation for freezer wall The system should have an option to mute the audible alarms It should be supplied with stabilizer and all other accessories required for proper functioning of refrigerator. The system should have fast recovery door openings for safe storage with frequent access and high ambient conditions The system should have double fans to create a double flow system to ensure even temperatures throughout the cabinet The system should have efficiency and low power consumption. The system should have HFC and HFO combined CFC-Free Refrigerant System should be compatible and have small foot print. The system should have one Access port for extemal sensor which should be located at the back of The system should have the option in select the configuration for shelves or drawers based on the user application The system should have Caster moving wheels with stopper for easy movement with levelling feet The system should have minimum 3-year warranty The system should be CE/ISO certified. The system should be as per the Quality management system: 1509001, Medical Device Management System: ISO13485 and Environmental Management System ISO14001 The system should have efficiency and low power consumption The Company must quote the freezer with all the suitable documents to justify the specification of product. System should be suitable for power rating 230v, 50Hz single phase. System should have battery backup for controller, display and alam System should be highly energy efficient Compliance to each of the above points should be separately indicated and evidence presence for each of them (Product brochures should be highlighted wherever required). Certificate of calibration and The system should be installed by the trained Engineer and users training should be given on Application, operation and maintenance The service team should be in Bangalore. Contact details and office address of Engineer should be The past performance/service support in NCBS/inStem/CCAMP should be satisfactory and the technical evaluation will be done accordingly

Refer document

Refer document

Refer document