Tender For Purchase Of Consumables For Nohp At Office Of The Civil Surgeon Jalgaon. Type IX GIC Glass Jonomer cement type IX 1) It should be supplied in the form of powder & liquid with components as per ADA/ISO/ISI specification 2) Material should have good handling characteristics and shelf life of at least two years from supply 3) It should have compressive strength more than 180 MPA 4) Finishing of material should be possible immediately after setting 5) It should have adequate mixing & working time. It should have less setting time 6) It should be radioopaque. 7) It should be in a box which should contain two components a) 120gms powder and b) 70 ml liquid 1) Maximum particle size should be 15um 2) Powder/liquid ratio in the range of 1.8/1.0 Mixing time 3) (approx..)-20 sec working time (approx..)- 2 min. (230 c) (from start of mixing) Final finishing commencing time 4-5 min (after seating the restoration 4) Film thickness of luting cement should be <20 um 5) Material should have good track record of its use Glass Ionomer cement (Luting/ Type 1) 6) ISO/ISI/CE/ADA specifications should be met 7) It should be in a box which should contain two components a) 80 to120gms powder and b) 70 ml liquid 1) Composition of material should be as per the ADA specifications • Composition of the resin: BISGMA, TEGDMA, UDMA, SIO2, and Organo sealants and other common ingredients. Suitable for user in esthetically sensitive areas. Composite shade Al 2) Material should have optical properties like tooth and have life like appearance after making restorations. 3) Should have good Polishibility 4) Material should be supplied in syringe form, should be easy to dispense and storage during use should be safe without andue polymerization. 5) A good variety of shades suitable for Indian population should be supplied as per the requirements of the user 6) Material should have optimum flow, good handling characteristics and shelf life of atleast three years from supply. 7) Material should achieve clinically and biological properties after curing supply should be in a syringe of 4 grms with despensing tips Composite shade A2 1) Composition of material should be as per the ADA specifications Composition of the resin: BISGMA, TEGDMA, UDMA, SIO2, and Organo sealants and other common ingredients. Suitable for user in esthetically sensitive areas.2) Material should have optical properties like tooth and have life like appearance after making restorations. 3) Should have good Polishibility 4) Material should be supplied in syringe form, should be easy to dispense and storage during use should be safe without andue polymerization. 5) A good variety of shades suitable for Indian population should be supplied as per the requirements of the user 6) Material should have optimum flow, good handling characteristics and shelf life of atleast three years from supply. 7) Material should achieve clinically and biological properties after curing supply should be in a syringe of 4 grms with despensing tips 1) Composition of material should be as per the ADA specifications Composition of the resin: BISGMA, TEGDMA, UDMA, SIO2, and Organo sealants and other common ingredients. Suitable for user in esthetically sensitive areas. Composite bonding agent 7th Generation 2) Material should have optical properties like tooth and have life like appearance after making restorations. 3) Should have good Polishibility 4) Material should be supplied in syringe form, should be easy to dispense and storage during use should be safe without andue polymerization. 5) A good variety of shades suitable for Indian population should be supplied as per the requirements of the user 6) Material should have optimum flow, good handling characteristics and shelf life of atleast three years from supply. 7) Material should achieve clinically and biological properties after curing. supply should be as follows 2 x 1.2ml PQ1 syringes 2 x 1.2ml Ultra-Etch syringes 20 x Blue Micro tips 40 x Inspiral Brush tips 1) Should be available in friction types design 2) Shank and neck should be made of steel of good quality. 3) Diamond particles embedded on the working end in the matrix which is durable. Diamond Burs Straight 4) Should not rust and corrode. 5) Should be autoclavable. 6) Should not disastrously break during use. 7) Should not dull after short duration of use. 8) it should containd 1 strip of 5 burs Diamond Burs Tapered 1) Should be available in friction types design 2) Shank and neck should be made of steel of good quality. 3) Diamond particles embedded on the working end in the matrix which is durable. 4) Should not rust and corrode. 5) Should be autoclavable. 6) Should not disastrously break during use. 7) Should not dull after short duration of use. 8) it should containd 1 strip of 5 burs Diamond Burs Round 1) Should be available in friction types design 2) Shank and neck should be made of steel of good quality. 3) Diamond particles embedded on the working end in the matrix which is durable. 4) Should not rust and corrode. 5) Should be autoclavable. 6) Should not disastrously break during use. 7) Should not dull after short duration of use. 8) it should containd 1 strip of 5 burs Diamond Burs Inverted cone 1) Should be available in friction types design 2) Shank and neck should be made of steel of good quality. 3) Diamond particles embedded on the working end in the matrix which is durable. 4) Should not rust and corrode. 5) Should be autoclavable. 6) Should not disastrously break during use. 7) Should not dull after short duration of use. 8) it should containd 1 strip of 5 burs Composite Polishing Kit 1) Should contain various sizes and shapes of rotary/hand tips. 2) Coarse, medium fine and extra fine grit should be available with colour coding. 1) Supplied in the form powder with components as per the ADA/ISO/ISI specifications. 2) Approximate Composition-a. Powder- potassium alginate 15%, CaSo4-16%, ZnO- 4%, Kltf-3%, Napo4-2 %and Diatomaceous earth-60% 3) Material should not irritate the oral tissues, shall have pleasant color & flavour. Powder should have fine texture & should be free from. foreign material. 4) On mixing - When mixed in accordance with manufacturer instructions material should give a smooth plastic mass of workable consistency & should be free from lumps & granules. There shall be no separation of constituents any the material shall be sufficiently plastic for under cuts & anatomical; details to be accurately reproduced but shall not run out of such impression material. 5) Mixing Time 45 sec. 1 min Alginate 6) Setting time-Not less than 2 minutes & 30 second 7) General strength not less than 50 Ibs/sq. Inch. Should not rupture during removal from mouth. a) Packing Material should be available in tightly sealed, moisture proof Pkt. Information to be supplied by the manufacturer - Date of Manufacture & date of expiry. Adequate instruction for proportioning & manipulation of the material suitable measures for powder & water for purpose of proportioning shall be supplied by the impression during the internal between its withdrawal & cast pouring. Weight of contents and setting times of material should be stated on the packing. b) There should be a colour indicator where in the colour changes when the alginate sets. 8) It should be 1 box should contain atleast 12 packets of alginate and each packet should have weight of 500 grams so the weight of the packet should be atleast 6 Kg. 9) Total demand is according to box IOPA X- Ray film Adult and Pediatric size (Pack of 150 films) 1) Name Intra-Oral-Periapical films (Adult) 2) Size of the film should be 32 x 41 mm (approx)3) It should be E-Speed film 4) It should have a protective plastic cover (water proof) with soft borders thus making it comfortable to the patients. 5) Individual X-Ray film packet should have a double emulsion E-Speed film with embossed dot for side identification 6) The film should be covered with light proof (black coloured) paper packet and should have a lead/tin foil for preventing the effect of back scatter and for radiation protection 7) The packet should be flexible and not very rigid 8) The film should provide good radiograph with adequate density, contrast and details and should not have any inherent artifacts 9) All the film packets should have sufficient shelf life 10) It each box should contain 100 films Lubricant spray for hand piece 1) It is used for maintenance of all dental hand pieces including high speed, slow speed and air motors. 2) it should have quantity of 800 ml Zinc Oxide 1) Should be specific for the dental use meeting ISO/ISI standard. 2) Should contain accelerator for rapid setting. 3) Should contain recommended percentages of other ingredients like magnesium oxide and others as per recommendations. 4) Should be usable as a temporary restorative material and also as root cancel sealer. 5) It should be pure free of any impurities. 6) it should be 150 gms powder Eugenol 1) Pure eugenol for dental use 2) The liquid Eugenol may contain a small percentage of olive oil or other natural oil. 3) Liquid should be supplied in amber colour or similar bottles. 4) Setting time should be 3 to 4 minutes. 5) It should be 100 ml Polishing Paste 1) Fine. Prophylaxis paste 2) Should contain fluoride 3) Should be available in various grit sizes and flavours 4) It should be 45 gms paste Endodontic files (8, 10, 15-40) Made up of stainless steel. Should follow international standardization for endodontic hand files ISO/ISI in all its features and colour coding. Should be supplied in various lengths like 21, 25, 31mm and others as per the need of the user. Should have good cutting efficiency. Handle design should have comfortable and firmgrip. Supplied in assorted sets from no 8 and 10 also from 15 to 40 Should be autoclavable. Should not rust and corrode in common disinfecting solutions and sodium hypochloride. Should show sigh of deformation before breakage. Endodontic files should be provided K files, reamer, Hfile. Endodontic files (45- 80) Made up of stainless steel. Should follow international standardization for endodontic hand files ISO/ISI in all its features and colour coding. Should be supplied in various length slike21, 25, 31mm and others as per the need of the user. Should have good cutting efficiency.Handle design should have comfortable and firm grip. Supplied in assorted sets from no 45 to 80as per the requirement of the users. Should be auto clavable. Should not rust and corrode in common disinfecting solutions and sodium hypochloride. Should show sigh of deformation before breakage. Endodontic files should be provided K files, reamer, H file. 1) Should follow ISO/ISI standard composition. 2) It should have supply in two pastes in equal amount 3) It should be 5 to 10 gms base and 8 to 12 gms catalyst calcium hydroxide- idoform paste 4) It should be premixed paste for immediate use with minimal material waste and clean up 5) It should be syringe tip delivary/for excellent accessand control during placement, 6) It should be formulated with idoform for increased radioopacity and anti bacterial effect, 7) It should be used with gutta percha and root canal cements should have inuf quantity for about 40 to 50 fillings per syringe. RC Pluggers and spreaders 1) Should be supplied in assorted packets from number #15 to #40,# 45 to # 80; in lengths of 21 mm and 25 mm. 2) Should be colour coded 3) Should have 2 degree taper 4) Should be made up of stainless steel. )ISO Standardized Gutta-percha points from number 15 onward sizes (#15-40) 2) (#45-80) 3) #15,#20,#25 4) Should be supplied in assorted packets as per required numbers and quantity Gutta- percha points 5) Should be colour coded 6) Have 2 degree taper 7) Should be accurate in tip diameter and taper as per ISO standards 8) Should not buckle down easily an shold have supply in box Absorbent points ISO standardized paper points from number 15 onwards sizes (# 15-40) (#45-80)# 15, # 20, # 25 Should be supplied in assorted packets as per required numbers and quantity Should be colour coded Arch bars (bundle) It should be a flat, sturdy stainless steel bar on which fleatsorhooks are attached. It should be a type of the prefabricated Erich archbars. 23 and 24 SS Surgical fixation wires The wire should have ability to bend without fracturing corrosion resistance 2) Circular in cross section and 3 feet in length in a single packet
