Tender For Providing Operation Theatre Door Arrangements For Construction Of Eye Operation Theatre In First Floor Over The Existing Ground Floor Of Eye Ward In Government Head Quarters Hospital At Kancheepuram, Kancheepuram District. ; 1 Supplying And Fabricating And Fixing In Position Aluminium Anodised Partly Top 1 / 2 Galzed And Partly Bottom 1 / 2 Panelled Door And Frame Made Out Of Box Section 101.6X44.45X3.18Mm Thick At 2.319 Kg M Door Shutter Made Out Of Box Section 47.1X44.45X2.5Mm At 1.202 Kg M For Vertical Style And Top, Lock Rail Sections Of Size 50X44.50X2.5Mm @ 1.292 Kg / M And Bottom 100.4X44.45X2.50Mm At 1.974Kg M Using Clips Of Size 17.15X17.27X1.5Mm At 0.176 Kg M With Necessary Metal Screws, Rubber Beading, Strike Plate Type Handle Ofsize 100X30x1.60Mm At 0.988 Kg M On Both Sides, Tower Bolts, Lock Pivot Arrangements And Top 1 / 2 Portion With5.50 Mm Thick Plain Glass And Bottom 1 / 2 Portion With Both Side Prelaminated Board ( Mdf ) 12Mm Thick For Panel Portion With 2 Nos. Of Hydraulic Door Closers Of Approved Quality Using Aluminium Extruded Section Body Tubler Type Universal With Double Speed Adjustment With Isi Monogram Including Cost Of Furniture Fitting Such As Pivot, Hinges, Tower Bolt, Lock, Door Stopper And All Materials Labour Power Consumption Required For Fabrication Drilling Required For Fabrication Drilling Holes In Rcc Columns Floorslabs Masonry Wall Wherever Necessary With Power Drills To The Required Extent And Make The Same To Original Condition After Fixing And As Directed.All The Aluminium Sections Are To Be Anodised With Matt Finish Under Electrically Controlled Condition In Accordance With Is 1868-1962 For An Average Anodic Flim Thickness Of 15 Microns Etc., Complete. The Materials Should Be Got Approved By The Executive Engineer Before Use On Works. The Rate Shall Be Inclusive Of All Materials, Labour For Fixing Transportation Loading, Unloading, And All Other Incidential Charges. Double Leaves 2 Supplying And Fabricating And Fixing In Position Aluminium Anodised Partly Top 1 / 2 Galzed And Partly Bottom 1 / 2 Panelled Door And Frame Made Out Of Box Section 101.6X44.45X3.18Mm Thick At 2.319 Kg M Door Shutter Made Out Of Box Section 47.1X44.45X2.5Mm At 1.202 Kg M For Vertical Style And Top, Lock Rail Sections Of Size 50X44.50X2.5Mm @ 1.292 Kg / M And Bottom 100.4X44.45X2.50Mm At 1.974Kg M Using Clips Of Size 17.15X17.27X1.5Mm At 0.176 Kg M With Necessary Metal Screws, Rubber Beading, Strike Plate Type Handle Ofsize 100X30x1.60Mm At 0.988 Kg M On Both Sides, Tower Bolts, Lock Pivot Arrangements And Top 1 / 2 Portion With5.50 Mm Thick Plain Glass And Bottom 1 / 2 Portion With Both Side Prelaminated Board ( Mdf ) 12Mm Thick For Panel Portion With 2 Nos. Of Hydraulic Door Closers Of Approved Quality Using Aluminium Extruded Section Body Tubler Type Universal With Double Speed Adjustment With Isi Monogram Including Cost Of Furniture Fitting Such As Pivot, Hinges, Tower Bolt, Lock, Door Stopper And All Materials Labour Power Consumption Required For Fabrication Drilling Required For Fabrication Drilling Holes In Rcc Columns Floorslabs Masonry Wall Wherever Necessary With Power Drills To The Required Extent And Make The Same To Original Condition After Fixing And As Directed.All The Aluminium Sections Are To Be Anodised With Matt Finish Under Electrically Controlled Condition In Accordance With Is 1868-1962 For An Average Anodic Flim Thickness Of 15 Microns Etc., Complete. The Materials Should Be Got Approved By The Executive Engineer Before Use On Works. The Rate Shall Be Inclusive Of All Materials, Labour For Fixing Transportation Loading, Unloading, And All Other Incidential Charges. Single Leaf 3 Supplying Fabricating And Placing In Position Of Aluminium Natural Colour Matt Finish Fixed Partition Top Half Glazed With 5.50Mm Thick Plain Glass And Bottom Half With Medium Density Fibre Board Of 12Mm Thick Both Side Pre Laminated For Cubical And The Outer Frame Of The Aluminium Section Of Size 101.60X44.45X3.18Mm @ 2.319Kg / M. At Internal Vertical 2 Nos & Horizontal 1 No, Mullion Of Aluminium Section Of Size 62 X 38 X 2Mm @ 1.174 Kg / M With Necessary Aluminium Clips Of Size 79.15 X 17.27 X 1.50Mm At 0.176 Kg / M With Necessary Rubbor Beading L Angles Including Dismantling And Redoing Masonry As Concrete Where Necessary Etc., Complete.The Aluminium Section Are To Be Anodised With Matt Finish Under Electrically Controlled Condition In Allfdjsfdslk With Isi 1868 / 1962 Specification For An Average Anodie Film Thickness Of Not Less Than 15 Microns.All Aluminium Sections Are Should Be Got Approved By Engineer Incharge Before Use On Works. 4 Supplying And Fixing Of M.S. Grill Of Approved Design For Doors, Windows, Open Courtyard, Grill Gate Etc., Using Necessary Mild Steel Flats For Inner And Outer Members Which Should Be Fixed On Edges Including Priming Coat Of Best Approved Quality Red Oxide Primer Etc., Complete Complying With Standard Specifications. 5 Painting New Iron Works Such As Steel Doors, Windows, Ventilators, Window Bars, Balustrades Etc., With Two Coats Of Best Approved First Quality And Colour Of Synthetic Enamel Paint Over The Existing Red Oxide Priming Coat In All Floors Excluding Cost Of Priming Coat Etc., Complete Complying With Standard Specification. ( The Make, Quality And Colour Of Paint Should Be Got Approved By The Executive Engineer Before Use On Works. ) 6 Repainting Two Coats Of Old Plastered Wall Surface With Ready Mixed Plastic Emulsion Paint ( Excluding Primer ) Of First Class Quality Including Thorough Scrapping, Clean Removal Of Dirt, And Including Necessary Plaster Of Paris Putty, Wherever Required Etc., Complete Complying With Standard Specification.
