}

Tender For Provision Of Certain Sanction Works In The Area Of Age B/R-I, Age B/R-Ii And Age E/M Under Ge (Central) Delhi Cantt-10, delhi-Delhi

Statutory Bodies & Commissions/Committees has published Tender For Provision Of Certain Sanction Works In The Area Of Age B/R-I, Age B/R-Ii And Age E/M Under Ge (Central) Delhi Cantt-10. Submission Date for this Tender is 28-12-2023. Uniform Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

41097390
Corrigendum : Tender For Provision Of Certain Sanction Works In The Area Of Age B/R-I, Age B/R-Ii And Age E/M Under Ge (Central) Delhi Cantt-10
Open Tender
Indian
Delhi
Delhi
28-12-2023

Tender Details

Tender For Provision Of Certain Sanction Works In The Area Of Age B / R-I, Age B / R-Ii And Age E / M Under Ge ( Central ) Delhi Cantt-10; 1 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc Laid, Bedded And Pointed In Any Mortar, All As Specified. 2 Roughening Surfaces Of Old Concrete Floor By Picking Sweping Clean And Washing Down With Water To Remove Dust Etc. Complete All As Specified. 3 M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.11 Sqm But Notexceeding 0.18 Sqm, In Floors Etc. Set And Jointed Inneat Cement Slurry And Pointed In White Or Coloured Cement To Match Over 15Mm Thick Screed Bed In Cm 1:4 Complete All As Directed. 4 S&F 15 Mm Dia Gi Tubing Medium Grade With All Fitting And Fixed To Wall And Ceiling Or Laid In Floors Etc As In Horizontal Or Vertical Surfaces Upto G+5 Storey Bldg Complete, All As Specified. 5 M&L Glazed Ceramic Tiles In Vertical Surface 300 X 600 X 8Mm / 350X 250X 7 Mm / 450X 350X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match Over 10Mm Thick Rendering In Cm 1:4 Incl Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding All As Specified And Directed . 6 S & Fin Repairsvitreous China Coloured European Type Wc With P Or S Trap For 100 Mm Bore , Including And Connection To Drain And To Flushing Cistern With Pipe 32Mm Dia Pvc Pipe And Fixing Bolts Complete All As Specified . 7 S & F In Repairs Vitreous Chinaware Coloured Wash Hand Basinofsize 580Mm X 450Mm Complete Including, Cp Waste Coupling , Pvc Waste Pipe , Complete Fixing Arrangementand Cutting For And Pinningin Walls & Making Good Complete All As Specifed And Directed By Engr In Charge. 8 S&F In Repair Plastic Water Closet Seat Cover / White Closed Pattern With Flat Bottom And Cover And Mild Steel C Hinges As Per Isicomplete All As Specified. 9 S & F In Repairs 10 Ltrs Pvc ( White ) Valve Less Syphonic Action Type, Flushing Cistern Low Level With Inlet Ball Valve Float, Handle, Fixing With Gitties Embeded In Wall With Drilling Machine Etc Complete All As Specified. 10 S&F In Repairs Bib Tap With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe, 15Mm Dia, Fancy Type, Cast Copper Alloy, Chromium Platedlong Body With Flange Complete All As Specified. 11 S&F In Repair Fancy Type Chromium Plated Brass Angle Valve Type Suitable For 15Mm Bore Pipe Complete All As Specified. 12 Supply & Fix In Repair Pvc Connection Pipe Of 1 / 2X18 Size With 2 Nos Brass Check Nuts With Washers, Complete All As Specified. 13 S&F In Repair Health Faucet, Cp Brass With 1.50M Long Flexible Pipe All Asspecified And As Directed. 14 S & F In Repair Fancy Type 150Mm Size Square Brass Cp Shower Rose With Long Arm All As Specified. 15 S&F In Repair Cp Grating 125Mm Dia, Complete All As Specified. 16 S&F In Repairs Fancy Type Looking Mirrorof Size600x450x6mmwith 100 Mm Wide Fancy Type Borderfixed With 4 Nos Stainless Steel Clips Complete All As Specified. 17 S & F In Repair Glass Corner Shelf 8Mm Thick Including Cp Railing Radius 250Mm Complete All As Specified And Directed. 18 S&F In Repairs Glass Shelf Assembly 450Mm Long 150Mm Wide With Cp Railingcomplete All As Specified And As Directed. 19 S & F In Repairs 15 Mm Diabrass Cp Three-In-One Wall Mixer For Mixing Hot & Cold With L Bendwater Screwed Down For Iron Pipe And Fixedcomplete All As Spd. 20 S & F In Repairs 15 Mm Diabrass Cpwhbmixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe And Fixedcomplete All As Specified. 21 S&Fin Repair Polythylene Of Low Or High Density Or Pvc, 32Mm / 40Mm Dia Waste Flexible Pipe 750Mm Long. 22 S&F In Repair Brass Chromium Plated Toilet Paper Holder, Complete All As Specified. 23 S&F In Repair Chromium Plated Tubular Towel Rail, 20Mm Dia, D Type, 60Cm Long Between Flanges Complete All As Specified. 24 S&F In Repair Brass Chromium Plated Soap Dish, Complete All As Specified. 25 Excavating In Post Holes ( Or Similar Holes ) Each Not Exceeding 0.50 Cu M, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm In Soft / Loose Soil Complete All As Specified. 26 S&F Joist, Channel, Angle, Or Tee Sections, Fixed Independently, Without Connection Plate, Etc. ( Cut To Ordinary Lengths I.E. Within 20Mm Of The Length Indicated ) Fe 450 W ( Gde E-250 Quality A ) . 27 Supply Onlychain Link Ms Galvanised Fencing, Any Size Or Type. 28 Fixing Only Chain Link Fencing Including Line Wires, Any Mesh, Size And Type To Any Type Of Standards, Rails, Straining Bolts, Etc. Including Provision Of Binding Wire. 29 M&L Applying Two Coats Of Syntheic Enamel Paint Over A Coat Of Red Oxide On Steel Surfaces Of Any Description Over 10 Cm Width Or Girth Including Preparation Of New Surfaces Complete All As Specified. 30 S&F Mild Steel Rag Or Lewis Bolts, Screwed One End, With Hexagonal Or Square Nuts And Washers, The Other End Enlarged, And Jagged Or Lewised, N Exc 15Cm Long. 31 Supply Only Mild Steel In Flat, Round Or Square Bars, In Available Lengths Fe 450 W ( Gde E-250 Quality A ) . 32 M&L For Brick Work With Sub Class B Brick Straight Or Curved On Plan Exc6 Metre Mean Radius With Old Size Bricks, Built In Cement Mortar 1:6, Upto G+5 Storey Bldg Complete All As Specified. 33 Supply And Fixpre Painted Galvalume Aluminum Zinc Coating Gi Base Corrugated Steel 0.5Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall Fixed With Self Tapping Screw With Minimum 150Mm End Lap And One Corrugation Side Lap Including Dismantling The Existing Sheets Complete All As Specified And Directed. 34 Rough Execavation N. Exc 1.5 M Deep And Getting Out In Soft / Loose Soil. 35 M&Lcement Concrete Coloured Chequired Tiles With Grey Cement And Pigment 30 Cm X 30 Cm X 25 Mm Thick Machine Pressed Set Jointed And Pointed In Net Cement Slurry In Floors And Cut And Polished Over 15 Mm Thick Screed Bed In Cm 1 : 6 All As Specified And As Directed . 36 Dismantling Of Plain Or Corrugated Steel Sheeting, Any Guage, Thickness From Roof Covering Complete All As Specified. 37 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided. 38 Dismantling False Ceiling Boards Any Description And In Any Position Incl Frame Work. 39 S&F Anodised Aluminium Snap Grade Of Size 600 X 600Mm Frame Work For False Ceilingincluding Hangers 6Mm Dia G I ( Upto 1200Mm Length ) Asjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of G I Flat 40 X 3Mm Size 60Mm Long And Expansion Hold Fasteners 12.5Mm Dia 40Mm Long.And Exposed Metal Frame Ceiling With 8Mm Thick Calcium Silicate Board Of Silicious And Calcareous Material Reinforced With Cellulose Fibre For Fixing In 600Mmx600mm Grid ( Frame Work For Ceiling Shall Be Measured And Paid Seprately ) All As Specified . 40 Demolition Of Brick Work Of Stone / Boulder Masonry, Build In Cement Mortar Including All Quoins, Arches, Pillars Etc, But Excluding Ashlars Facings, Dressed Stonework And Precast Concrete Articles. 41 Taking Down Cement Or Cement Lime Plaster Any Description On Brick Or Stone Walls Etc Including Racking Out Joints, Hacking For Key, Scrubbing Down With Water Etc Complete All As Specified And Directed. 42 M&L 15Mm Thick Rendering On Brick Work Or Concrete Surfacesin Cement Mortar 1:4Finished Even And Fair. 43 Demolition Of Cement Concrete ( Unreinforced ) In Ground Floors And Pavings N.Exc 15Cm Thickness ( Below Or Above Ground Level ) . 44 M&L For Pcc 1:4:8 Type D-2 Using 40 Mm Graded Stone Aggregate As In Foundation / Sub Base Filling And Mass Concrete Complete All As Specified And As Directed. 45 M&L Vitrified Ceramic Light Shade Coloured Tiles 10Mm Thick Square / Rectungular Polished Area Of Each Tile Not Exceeding O.36 Sqm In Floor Etc Set And Jointed In Neat Cement Sluarg And Painted In White Or Coloured Cement To Match Laid Over 15Mm Thick Screed Bed Of Cm 1:6 . 46 All As Per Item No 45 Above But As In Skirting Over Rendering 10Mm Thick In Cement Mortar 1:4. 47 Sand Filling Under Floors Or In Foundations Incl. Watering And Consolidation. 48 M&L 60Mm Thick Interlocking Paver Block With Grey Cement And With Pigment Of Any Size And Shape Confirming To Is 15658-2006, M-35 Grade As Approved By E-I-C Laid In Flooring And Joints Filled / Broomed With Fine Sand. 49 Material And Labour For Preparation Of Old / New Plastered Surfaces As Of Walls And Applying Twocoats Of Weather Proofing Exterior Acrylic Emulsion Paint Of Duluxweather Shield Max Or Apex Ultima From Asian Paintover One Coat Of Primer From The Same Manufacturerwhite Lime Wash Complete All As Specified And Directed. 50 M&L Forold / New Plaster Surface Two Coat Of Oil Bound Destemper Over 3Mm Thick Of Birla White Putty Including Preparation Of Newly Plasteredsurface Etc All As Specified. 51 Demolition Of Cement Concretepavings Exc 15 Cm Thickness ( Below Or Above Ground Level ) For Ewc & Iwc Removing Out Cinder / Concrete From Sunken Portion And And ( A ) M & L For Sunken Portion Filled With Cinder Or 40Mm Graded Brick Bats Overfinished With 50Mm Thickpcc 1:2:4 Type B1 With Water Proofing Compound Including Applying 2 Layer Of 85 / 25 Bitumen @ 1.20 Kg / Sqm Each Coat All As Specified And Directed ( B ) M & L For Protection Plaster 15Mm Thick On Cement Mortar 1:3 Admixed With Appropriate Integral Water Proofing Compound With Sika ® Plastocrete Plus As Specified . ( C ) M & L For Providing 50 Mm Dia Gi Pipe Spout Projecting At Least 150Mm Beyond Outer Face Of Wall. ( D ) Filling Of Sunken With Brick Bats As Per Requitrement. ( E ) Cost Of The Above Aspect Shall Be Deemed To Be Included In The Quoted Rates Of The Respective Item And Nothing Extra Shall Be Paid On This Account.All As Specified And Directed.Note : Iwc / Ewc Shall Be Measured And Paid Under Relevant Items Seperately 52 Factory Made Signle Extruded Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter Of 30Mm Size Comprising Of Virgin Polymer Of K Value 58-60 ( Suspension Grade ) , Calcium Carbonate And Natural Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives ( Maximum Toxicity Index Of 12 For 100 Gms ) Having Minimum Density Of 650Kg / Cum And Screw Withdrawal Strngth Of 1800N ( Face ) And 900 N ( Edge ) , Minimum Compressive Strength 50N Mm2, Modulus Of Elasticity 850N / Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof, Water / Moisture Proof And Fire Retardant And Fixing With Stainless Stell Butt Hinges Of Requried Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screw, All As Per Direction Of Engr-In-Charge. Note: Stainless Steel Butt Hinges And Necessary Ss Screws Shall Be Paid Separtely. 53 Factory Made Signle Extruded Wpc ( Wood Polymer Composite ) Solid Door / Window / Ceosetory Windows And Other Frames / Chowkhat Of Size 45X70 Mm Comprising Of Virgin Pvc Polymer Of K Value 58-60 ( Suspension Grade ) , Calcium Carbonate And Natural Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives ( Maximum Toxicity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750Kg / Cum, Screw Withdrawl Strength Of 2200N ( Face ) And 1100 N ( Edge ) , Minimum Compressive Strengthy Of 58N / Mm2, Modules Of Elasticity 900 N / Mm2 And Resistance To Spread Of Flame Of Being Termite / Borer Proof, Water / Moisture Proof And Fire Retardant And Fixed With Ms Hold Fast / Lugs / Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engr-In-Charge. ( Ms Hold Fast / Lugs Or Ss Dash Fasteners Shall Be Paid For Separtely ) .Note: For Wpc Solid Door / Window Frames, Minus 5Mm Tolerance In Dimension I.E. Depth And Width Of Profile Shall Be Acceptable. Variation In Profile Dimensions On Plus Side Shall Be Acceptable But Not Extra Payment On This Account Shall Be Made. 54 M & L Forpowder Coated ( Minimum Thickness Of Powder Coating 50 Micron ) Aluminium Frame For Doors , Windows , Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And Directed. 55 M & L Forpowder Coated ( Minimum Thickness Of Powder Coating 50 Micron ) Aluminium Sliding Windowwith Aluminium Section Weighing 0.90 Kg / M Including Joining Cleats, Glazing Clips, Rubber Neoprene Packing, Necessary Powder Coated Hardware I.E.. Handles, Barrel Tower Bolts, Hinges Etc, Powder Coatedaluminium Snap Beading, Screws Etc. Complete All As Specified And Directed.Note : Panel Filling I.E.. Glass, Fibre Sheet, Board, Wire Mesh Etc. Shall Be Measured And Paid For Separately. 56 M&L For Powder Coated ( Minimum Thickness Of Powder Coating 50Micron ) Anodised Aluminium Door Shutters, Aluminium Section Weighing 0.90Kg / M Including Necessary Joining Cleats, Glazing Clips, Rubber Neoprene Packing, Handles 2 Nos In Each Door, Hinges, Anodised Aluminium Snap Beading, Screws Etc. Complete All As Specified.Note : Panel Filling I.E.. Glass, Fibre Sheet, Board, Wire Mesh Etc. Shall Be Measured And Paid For Separately. 57 S&F Stainless Steel Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Tinned Tacks Or Stainless Steel Wire Staple Complete All As Specified And Directed. 58 S&F 12Mm Thicksheet Glass Ordinary Quality In Square N.Exc 0.5 Sqm Each Including Grinding Of Edges For Crockery Cupboard Including Taking Out / Broken Glass With Roller, Complete All As Specified. 59 M&Lfor Rendering 10 Mm Thickin Cm ( 1:6 ) On Fair Faces Of Brick Work Or Conrete Surfaces / Stone Masonaryand Finishing The Surfaces Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. 60 M&L For Preparation Of The Newly Plastered Surfacesof Walls & Applying Two Coatsdistemper Oil- Emulsion , White Or Tintedover A Coat Of Primer Surfaces Of Wall Complete All As Specified And Directed. 61 S& Cautionary Sign Board Made Of High Intensity Grade Retero-Reflective Sheeting Triangular Shape 45Cm Each Side. It Is Made Of Alcobond Sheet / Aluminium Sheet 2Mm Thick Covered With High Intensity Grade Retero Reflective Sheet As Per Irc Standard And Logos In Black To Be Printed And Boarder Must Red Colour As Per Irc Standard And Fixed After Etching Treatment Fixed With Suitable Adhesive.It Is Painted With Epoxy To Standard Made Fixed To Structural Stainless Steel Frame Of 50Mm Internal Dia, 18Gauge Ss Pipe With Nuts Bolts Or Rivets Or Gas Welding Ensuring Safety. This Fixed To One Vertical Post Of 50Mm Internal Dia Pipe. As Required 2.10Mtr Long.Fixed On Roads Sidesby P.C.C ( 1:2:4 ) Including Taking Out Old One All As Specified And Directed By Engineer-In-Charge. 62 S&F Double Legged Informatory Sign Board 60Cmx 45Cm Fixed On Single Frame And Meeting Back To Back On The Stainless Steel Pipe 50Mm Internal Dia, 16Gauge Pipe.The Boards Are Of High Intensity Blue Or Green Or As Required Colour Grade Ratro-Reflective Sheet Of Avery Dennisox Made Out Of 2Mm Thick Alco Bond / Aluminium Sheet To Be Covered With High Intensity Grade Retero-Reflective Sheet ( Avery Dennision ) Of Green As Per Irc Standards.The Whole Is Fixed To Sheet And Fixed With Suitable Adhesive To Alco Bond Aluminium Sheet Painted With Epoxy Paint To Standard Make, Fixed To Structural Steel Frame Work Ss Pipe Of Size 50Mm Internal Dia Pipe With Nuts, Bolts / Rivets Ensuring Safety Against Removal Of Plates. The Lettering Is Computerized Cut Of High Intensity Grade White Sheeting ( Avery Dennison ) And Mechanically Fixed On This Board Of Green Blue Colour. Then These Two Board Is Fixed To Two Vertical Posts Of 50Mm Internal Dia Pipe 2Mtr Long In Which 45Cm To Be Inserted In Foundation And Fixing In Ground By P.C.C ( 1:2:4 ) Below Gl Including Taking Out Old One All As Specifeid & Directed By Engineer In Charge. 63 S&F Road Guide Map Sign Age Of Size 6 Feet X 4 Feet Made Of Ss Rectangular Pipe Of Size 50Mm Internal Pipe, 18Gauge. The Front Face Shall Be Reflectorised With Retro-Reflective Sheeting ( Prismatic And Mounted On A.C.P Sheet Of 3Mm Thickness. The Back Side Of Signa Shall Also Be Covered A.C.P Sheet Of 3Mm Thickness. The Entire Board Shall Be Covered By A Polycarbondate Sheet Of 2Mm Thickness In The Front Of Safe Gaurd From Scratches, Damages, Dust And Water Including The Survey And Preparation Of Road Guide Map And List Of Areas As Directed By Engineer-In-Charge.Board Is Fixed On Two Vertical Posts Of 50Mm Internal Dia Pipe 2Mtr Long In Which 45Cm To Be Inserted In Foundation And Fixing In Ground By P.C.C ( 1:2:4 ) Below Gl Including Taking Out Old One All As Specifeid & Directed By Engineer In Charge. 64 S&F 800Mm Dia Of Convex Mirror Made Of Pc Material Provided With Suitable Ms Pipe Post, Duly Powered Coated As Per Site Requirement. It Is Meant For Road Turning, Intersections, Curves, T Junctions, Hospital, Parking Lots Etc. It Is Also Ideal For Surveillance. It Sholud Have Clear & Definite Mirror Image Having 130 Degree Of Viewing Angle. It Is Unbreakable & Stronger Than Glass And Fixed On Ground Below 45Cmby P.C.C ( 1:2:4 ) Including Taking Out Old One Complete As Directed By Engineer-In-Charge. 65 Surface Excavation N.Exc ( Not Exceeding ) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Soft / Loose Soil Complete All As Specified And Directed. 66 M&L Chequered Endura Tiles 30Cmx 30Cmx 10Mm Thick, For External Flooring Set, Jointed & Pointed In Neat Cement Slurry In Floors With Grey Cement And Pigments Over & Including 15Mm Thick Screed In Cm 1:6 67 M&L 25Mm Thick Cement Concrete Type B-O, 1:2:4 ( 12.5Mm Graded Agg ) As In Sub Flooring. 68 M & L Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding, Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified & Directed. 69 S&F For 16 To 18 Mm Thick Dholpur Stone Cladding Gang Saw Cut With Machineedges, Uniform Colour ( Any Colour ) Of Each Stone Size Not Exceeding 0.36 Sqm Including Drilling Hole And Fixed With Ss Screw In Wall Including 20Mm Thick Backing In Cm 1:3 Complete All As Specified & Directed By Engr-In-Charge. 70 M&L For 20 Mm Thick Backing Coat In Cm 1:3 Complete All As Specified & Directed By Engr-In-Charg. 71 Taking Down Carefully Copper / Aluminium Point Wiring From Woodenbattan / Conduits Or From The Wall By Chasing / Cutting ( Light, Fan, Socket Or Power ) Completely Including ( Fittings Such As Switches, Ceiling Roses, Pendants, Regulator, Sockets Etc. To Be Measured Separately ) And Making Good Disturbed Surfaces Of Walls, Floor Etc. 72 Taking Down Old Mccb, Tpn Dbs , Spn Dbs, Sp Mcb & Main Switch / Enclosure Box Of Any Make And Type From The Site And Making Good Surface Complete All As Specified And Directed. 73 Taking Down Old Submain Wiring Of Any Size And Make From The Site And Making Good Surface Complete All As Specified And Directed. 74 Taking Down Old Unsv Light Fitting Of Any Size And Make From The Site And Making Good Surface Complete All As Specified And Directed. 75 M & L For Point Wiring Complete With 1.5 Sqmm Single Core Pvc Insulated Frls Cable 1100 Volts Grade With Multi Stranded Copper Conductor Drawn Through New Pvcconduit20 Mm Dia Medium Grade Isi Marked And All Conduit Accessories Concealed In Walls / Ceiling / Fixed To Roof / Truss / Columns Etc And Including Provision Of 1.5 Sqmm Pvc Insulated Copper Cable Frls As Earth Continuty, Fabricated Branded Modular Metal Flush Box Duly Make Embossed, Concealed In Walls With Suitable Modular Inner And Outer Plate For Housing Switches , Socket Out Let And Fan Regulators Etc, Complete All As Specified And As Directed For The Followings:- 76 One Light / Fan Point Controlled By One By One Way Switch ( Switch To Be Measured And Paid Separtely ) 77 One 5 Pin Socket Outlet 5 Hole 5 Amp Independent Including Pvc Unsheathed Copper Conductor 1.5 Sqmm Cable Asearth Wire Connected To Common Earth And To Earth Dully Socket & Switches To Be Measured And Paid Separately. 78 All As Per Item No 75 As Above But Same Board. 79 One Power Point With Insulated Stranded Copper Conductor Cable 4 Sqmm Single Core And Pvcinsulated Frls 1100 Volts Unsheathed Copper Conductor 4 Sqmm Stranded Conductor As Earth Wire Connected To Dolly Complete ( Socket And Switches To Be Measured And Paid Separately ) Note For Item 74 & 75 : ( I ) In Case The Wiring Is Encountered With Any Beam / Column, Then The Wiring Will Run On Pvc Casing / Caping To Avoid Any Damage To The Rcc Portion. ( Ii ) No Cutting Shall Be Done In The Roof For Laying Pvc Conduit For Ceiling Fan Point Wiring, In This Specified Portion Wires Shall Run Through The Surface New Conduit Shall Be Provided As Mentioned In Note ( I ) Above. ( Iii ) Proper Colour Code Will Be Used For Wiring As Per The Electrical Rule And As Directed By Eic. 80 M & L Submain Wiring With Two Run Single Core 6 Sqmm Frls Copper Conductor Cable Pvc Insulated, Unsheathed, 1100Volts Grade In And Including Pvc Conduit Isi Marked Alongwith One Run Of 6 Sqmm Single Core Pvc Frls Insulated Unsheathed Copper Conductor Cable As Continuous Earth Wire And Connecting To Existing Main Db And Testing On Completion Etc Complete All As Directed.Note: Three Runs Of 6 Sqmmcable And One Run Of Pvc Conduitshall Be Measured As One Rm. 81 M&L In Replacementswitch Modular Type 6 Amps 1 Way, 1 Module, 230V Ac Complete All As Specified And Directed By Engineer In Charge. 82 M&L In Replacement Switch Modular Type 16 Amps 1Way, 1 Module With Modular Plate Light Marking 230V Ac Complete All As Specified And Directed By Engineer In Charge. 83 M&L In Replacement Modular Socket Outlet 2 / 3 Pin 6 Amp Socket 2 Module Complete All As Specified And Directed By Engineer In Charge. 84 M&L In Replacement Modular Socket Outlet 2 / 3 Pin 6 / 16Amp Universal Socket 2 Module Complete All As Specified And Directed By Engineer In Charge. 85 M&L Ceiling Rose 3 Phase Pvcpolycorbonate, Isolated Body. 86 Supply And Fix Led Batten Luminaire Surface Mounted T-8, 4 Feet System Wattage Of Not Less Than 20 Watts With Lifetime Of 50000 Burning Hours With 70% Of Its Initial Lumen Maintained. Cri>80, Power Factor > 0.95, Thd< 10%, Colour Temperature - 6500K, Surge Protection 2.5Kv In Cm, Ip-20 Protected, Meets Led Is Specifications, Class - 1, Short Circuit And Over Circuit Protection, Voltage Range - 150 To 270 Volts Ac, Temperature Range 0 To 50 Degreec, System Efficacy At Luminarie Level > 100 Lumens / Watt Andincluding Connecting Up With Pvc Sheathed 1.5 Sqmm 3 Core Copper Conductor Flexible Wire From Ceiling Rose To Fitting Fixed Completeallas Specified And Directed. 87 Supply And Fix Led Batten Luminaire Surface Mounted 2 Feet System Wattage Of Not Less Than 10 Watts And Not Less Than 1000 Lm With Life Time Of 50000 Burning Hours With 70% Of Its Initial Lumen Maintained. Cri > 80, Power Factor > 0.95, Thd < 10%, Color Temperature > 6500 K , Surge Protection 2.5 Kv In Cm Ip- 20 Protected Meets Led Is Specifications, Class - 1, Sdcm <5 Short Circuit And Over Circuit Protection, Voltage Range - 150 To 270 Volts Ac, Temperature Range 0 To 50 Degree C, System Efficiancy At Luminarie Level =80 Lumens / Watt And Including Connecting Up With Pvc Sheathed 1.5 Sqmm 3 Core Copper Conductor Flexible Wire Fixed Complete All As Specified And Directed. 88 Supply And Fix Not Less Than 10 Watts Bulkhead Fitting With Powder Coated Die Cast Aluminium Housing With Glass / Non Yellowing Polycarbonate Cover, Ip65 Protection, System Level Efficacy Of The Luminary Is > 90 Lm / W With A Life Class Of 50, 000 Burning Hours At L70 Criteria, Power Factor >0.95, Driver With Voltage Range 150-270V, Temperature Range 0 To 50 Deg, Driver Efficiency >85%, Thd<10%, Cri>80, Color Temperature-6500K, Surge Protection Of 4.0 Kv, Including Connecting Up With Necessary Pvc Sheathed 3 Core 1.5Sqmmcopper Conductor Flexible Wire Fixed Completeallas Specified And Directed. 89 Supply And Fix Not Less Than 30 W High Efficient Led Street Light Fitting With Pressure Die Cast Lm6 Aluminum Housing And Has Lenses Specially Designed For Street Lighting With Polycarbonate Cover.System Level Efficacy Of The Luminarie Is 100Lm / W With A Life Class Of 50, 000 Burning Hours At L70. The Color Temperature Is Around 6500 K With A Color Rendering Index Of 70.The Luminaire Is Ip:66 Protected With Ik05 Impact Resistance.It Has An Electronic Driver Complaint To Iec Safety Standards With A Power Factor>.0.9, Voltage Variation Range 120-270V, Thd<20%, High And Low Protection Along With A Surge Protection Of 4 Kv Including 40Mm Dia Gi Light Grade Pipe1.5 Meter Length Bend To Shape And Necessary Clamps Etc For Fixing The Light Fittings On Pole Fixed Complete As Specified And Directed. 90 Supply And Fixing Ventilating Fan250 Mm Sweep, 1250 Rpm, Non Metallic Resin Body, Single Phase 240 Volts Ac 50 Hzand Connecting Up Complete Including Louvers And Provision Of Copper Cable 3 Core Of Size 0.5 Sqmm For Connection From Ceiling Rose To Fan Completeall As Specified And As Directed. 91 Supply & Fix In Repair Factory Made Epoxy Powder Coated Load Line Distribution Board Tpn-4 Ways With Metal Door ( Ip-43 Protection ) Fabricated From Minimum 1.6Mm Thick Crca Sheet And Fixed Flush To Wall And Suitable For Universal Mounting And Including Insulated 200 Amp Copper Bus Bar, Isolated Neutral Bar, Standard Din Rail, Earth Bar And Cable Ties For Cable Management, Top And Bottom Removeable Gland Plates With Knockouts And Suitable For One Tpn- Mccb 125 / 160 Amp As Incomer And 32 To 63 Amp Sp Mcbs Outgoing Complete All As Specified And Conforming To Is : 8623. 92 M&L Earthing Complete With Gielectrode 600X 600 X 6Mm, Thick Buried Directly In Ground Vertically In A Pit Of Depth Not Less Than 2.25 Mtr Below Normal Ground Level ( With Top Edge Of Earthplate Not Less Than 1.50 Mtr Below Normal Ground Level Connected To Gi Strip 32X6mm As Earthing Lead By Means Of Bolt Nuts, Check Nuts, And Washers Of Brass Connected Including Gun Metal Or Phosphorus Bronze Of Sixe 75X75x25mm Drilled And Screwed Including 3 Nos 8Mm Dia 25 Mm Long Hexagonal Head Screwed All As Specified Including Excavation And Earth Work And Disposal Of Surplus Soil Incl 40 Mm Gi Tubing Light Grade And Necessary Fitting For Protection Of Gi Strip Incl Laying Of Charcoal Dust And Common Salt Ppc ( 1:2:3 ) Type C-1 ( Using 20Mm Graded Stone Aggregate ) For Earth Pit With 40 X 40 X 6Mm Msangle Iron Frame For Cover 40 Mm Thick ( 1:2:4 ) Type B20 Using 12.5 Mm Graded Stone Aggregate Reinforced With 8 Mm Dia Round Bar @ 75Mm C / C Both Way With Ms Handle 20Mm Dia Plastering 15Mm Thick Cm ( 1:6 ) Internally And Upto 150Mm Below Ground Level Externally Pgl Funnel With Ground Wire Mesh 20Mm Dia Med Grade Gi Pipe For Watering Complete All As Shown On Electrical Plate No 3 Of Ssr Part-1 2009 And Connected In Earth Test Incl Testing Completed All As Specified And Directed. 93 M&L Distribution Board Spn8 Way With 100 Amp Rated Bus Bar Double Door. 94 M&L Decorative Wall Mounting Decorative Wall Light Fixture Made Up Of Polycarbonate, Suitable For 14W Retrofit Led Bulb ( B-22 Base ) . 95 S&F Wall Mounted Fan 400 Mm Sweep Aerodynamic Designed Airdelivery = 70 Cmm, Thermal Over Load Protected Motor 3 Blade White Colour, 230 Volts, 50 Hz Not More Than 1450 Rpm With 90 Degree Oscillation And Having Speed & Oscillation Control By Two Pullcords System All As Specified And Directed. 96 S&F Sheet Metal Enclosure Single Pole And Neutral With A Two Pin Earth Plug And Socket Complete With A Mcb Sp 20 Amp 220 Volts, 50 Hz, 10Ka Breaking Capacity Complete All As Specified And Directed. 97 Taking Down Carefully The Existing Ceiling Fan Of 1200Mm From Its Position After Disconnecting Electric Connectionand Checking It For Its Serviceability And Deposite To Mes Store As Specified And Directed. 98 Supply And Fixing Ceiling Fans Complete With Blade, Down Rods, Electronic Regulator And Accessories Rated Speed Not Less Than 330 Rpm, 230 V, 1200 Mm Sweep, Air Delivery Not Less Than 220 Cmm With Service Value Not Less Than 7.5 Cmm / W , Beefive Star Rated Voltage Range 140 - 280 Volts Power Factor > .9 And Thd < 20 %With Brushess Direct Current Motor ( Bldc ) All As Specified And Directed By Engr In Charge. Note : Down Rods Length Should Be As Per Site Requirement. 99 S&F In Repair Sub Main Wiring With Two Runs Of 4 Sqmm Single Core Pvc Insulated Frls Cable 1100 Volts Grade, Multistrandedcopper Conductor Cable With One Run Of 4 Sqmm Single Core Pvc Insulated Frls Cable 1100 Volts Grade, Multistrandedcopper Conductor Cable As Earth Continuity Conductor, Drawn Through And Including 25 Mm Dia Non Metallic Rigid Pvc Conduit Consiled And Conduit Accessories On Surface Of Walls Complete All As Specified And Directed. 100 M&L Mcb Spn 32 Amp B Curve . 101 Supply And Fix In Repair Mccb 125 Amps, Fp 415 Volts 16 Ka 50 Hz With Thermal Magnetic Setting Complete All As Specified And Directed By Engineer In Charge. 102 S&F Mcb Sp 6-32 Amps 240 Volts Curve B Series 10 Ka 50 Hz Complete All As Specified And Directed. 103 Schedule Of Credit

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 21-12-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 28-12-2023

Key Value

Document Fees
INR 500 /-
EMD
INR 85000.0 /-
Tender Value
INR 42.50 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail