}

Tender For Special Repair To Certain Roads At Sigar Under Ge 872 Ews, Lower Siang-Arunachal Pradesh

Military Engineer Services has published Tender For Special Repair To Certain Roads At Sigar Under Ge 872 Ews. Submission Date for this Tender is 15-01-2024. Road Work Tenders in Lower Siang Arunachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

41065245
Corrigendum : Tender For Special Repair To Certain Roads At Sigar Under Ge 872 Ews
Open Tender
Indian
Arunachal Pradesh
Lower Siang
15-01-2024

Tender Details

Tender For Special Repair To Certain Roads At Sigar Under Ge 872 Ews; 1 Repair To Potholes Any Depth, Exe 30 Mm And Not Exceeding 1 Sqm Each Including Sweeping Free From Dust And Mud, Or Water, Scoring Sunken Surfaces In Roads, Paths, Etc., Cutting Around Edges To At Least 25 Mm In Depth, Making Good By Applying Tack Coat At The Rate Of 05 Kg Per 10 Sqm, Putting In Bituminous Macadam Well Rammed And Sealed With Bitumen 9.8 Kg Per 10 Sqm Blinded With 0.09 Cum Stone Chippings, 6.3 Mm Size And Rolled And Compacted With Power Roller 8 To 10 Tonnes To Required Camber And Gradient Complete All As Specified And As Directed. 2 Preparing Existing Black Top Surfaces By Brushing With Wire Brushes For Removing Caked Mud Etc., Sweeping With Brooms And Finally Fanning The Cleaned Surface With Gunny Bags To Remove All Loose Dirt Etc. Complete All As Specified And As Directed. 3 M & L For Applying Evenly A Tack Coat With Bituminous Primer ( Paving Grade Bitumen Vg-10 Grade ) @ 5 Kg Per 10 Sq Metres Complete All As Specified & As Directed. 4 M & L For Bituminous Macadam Not Exceeding 75 Mm Thickness ( Compacted Thickness ) Using Hot Mix Plant And Mechanical Paver With 4% Binder ( Paving Grade Bitumen Vg-30 Grade ) Content By Weight Of Total Mix, Rolled And Compacted With Power Roller 8 To 10 Tonnes To Required Camber And Gradient Complete All As Specified And As Directed. Note :- ( I ) Bituminous Macadam Shall Be Laid Using Self Propelled Hydrostatic Paver Finisher And Preparation Of Mix Shall Be Using Hot Mix Plant And Transporting The Mix In Tipper. ( Ii ) The Exact Bitumen Content Required Shall Be Determined As Per Irc 27: 2009. The Adjustment In Rate On Minus Side Variation In Quantity Of Bitumen If Any Shall Be Priced At The Rate Of ?55 Per Kg. No Claim Whatsoever Shall Be Made For Adjustment In Plus Side. 5 M & L For Bituminous Concrete 40 Mm ( Compacted Thickness ) Using Graded Crushed Stone Aggregate Premixed With Binder ( Paving Grade Bitumen Vg-30 Grade ) @ 5.5% By Weight Of Total Mix & Hydraulic Lime / Cement ( Opc-43 Grade ) Filler, Rolled And Compacted To Required Camber And Gradient Complete All As Specified And As Directed. Note :- ( I ) Semi Dense Bituminous Concrete Shall Be Laid Using Self Propelled Hydrostatic Paver Finisher And Preparation Of Mix Shall Be Using Hot Mix Plant And Transporting The Mix In Tipper. ( Ii ) The Exact Bitumen Content Required Shall Be Determined Following The Marshall Mix Design Procedure Contained In The Asphalt Institute Manual Ms-2 ( Sixth Edition ) As Referred In Case 3.5.3 Of Irc 111: 2009. The Adjustment In Rate On Minus Side Variation In Quantity Of Bitumen If Any Shall Be Priced At The Rate Of ?55 Per Kg. No Claim Whatsoever Shall Be Made For Adjustment In Plus Side. 6 S & F Solar Road Studs Of Size Not Less Than 125X 125 X 25 Mm Made Of Weather Resistance Aluminium Alloy And Poly Carbonate Material Electronically Welded Micro- Prismatic Lens With Abrasion Resistant Coating As Approved By The Engineer In Charge. The Cats Eye Shall Support A Load Of 13635 Kg Tested In Accordance With Astm D4280. The Slope Of Retro- Reflective Surface Shall Be 35° ± 5° To Base. The Reflective Panels On Both Sides With At Least 12 Cm Of Reflective Area Up Each Side. The Luminance Intensity Should Be As Per The Specification And Shall Be Tested As Described In Astm E: 809 As Recommended In Bs: 873 Part 4 :1973. The Studs Shall Be Fixed To The Road Surface Using The Adhesive Conforming To Is, As Per Procedure Recommended By The Manufacturer Complete And As Per Direction Of Engineer-In-Charge. The Solar Panel Shall Be High Efficiency Mono Crystalline 2.5 V / 60 M A And The Battery Shall Be One Ni-Mh Type ( 1.2 V / 1200 M Ah ) High Temp For Backup Of 36 Hours Full Charging. The Flash Frequency Shall Be 60 ± 5 Times Per Minute. Make- Model No 111 Jugnu Of Dark Eye Or Equivalent Makes As Given In Appx B 7 Providing And Applying 2.5 Mm Thick Road Marking Strips ( Retro-Reflective ) Of Specified Shade / Colour Using Hot Thermoplastic Material By Fully / Semi-Automatic Thermoplastic Paint Applicator Machine Fitted With Profile Shoe, Glass Beads Dispenser, Propane Tank Heater And Profile Shoe Heater, Driven By Experienced Operator On Road Surface Including Cost Of Material, Labour, T & P, Cleaning The Road Surface Of All Dirt, Seals, Oil, Grease And Foreign Material Etc. Complete All As Specified And As Directed.

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 08-01-2024 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 15-01-2024
2 30-12-2023 BOQ CORRIGENDUM Other 08-01-2024

Key Value

Document Fees
INR 1000 /-
EMD
INR 182000.0 /-
Tender Value
INR 1.07 Crore /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail