Tender For Repair To Wooden Steel Furniture, Polishing Painting And Other Related Work At Various Units And Dgqa Complex Under Ge North Mumbai, mumbai-Maharashtra

Tender For Repair To Wooden Steel Furniture, Polishing Painting And Other Related Work At Various Units And Dgqa Complex Under Ge North Mumbai; 1 Chair Dining Offrs Fd / Map-Ii / 04 Removing The Existing Unserviceable Seat Foam And Replacing With 75Mm Thick Urethane Foam With 40 Density Pasted With Adhesive Duly Covered With Acrylic Fabric Of Approved Class, Not Less Than 350 / - Per Rm Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 2 Chair Dining Offrs Fd / Map-Ii / 04 Removing The Existing Unserviceable Seat And Replacing With 12Mm Thick Bwr Phenol Bonded Plywoodcomplete All As Specified In Drawing And Directed By Engineer-In-Charge. 3 Chair Dining Offrs Fd / Map-Ii / 04 Removing The Existing Unserviceable Side And Front Rail And Replacing With 70Mm X 40Mm Teakwood Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 4 Chair Dining Offrs Fd / Map-Ii / 04 Removing The Existing Unserviceable Rear Rail And Replacing With 90Mm X 40Mm Teakwood Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 5 Chair Dining Offrs Fd / Map-Ii / 04 Removing The Existing Unserviceable Front / Rear Leg And Replacing With 35Mm X 50Mm Teakwood Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 6 Chair Dining Offrs Fd / Map-Ii / 04 Removing The Existing Unserviceable Stiffener And Replacing Stiffener With 20Mm X 25Mm Teakwood Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 7 Chair Dining Offrs Fd / Map-Ii / 04 Removing The Existing Unserviceable Wooden Block Stopper And Replacing Block With 75Mm X 75Mm X 25Mm Teakwood Stopper Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 8 Chair Dining Offrs Fd / Map-Ii / 04 Removing Old Broken Pvc Ring / Rubber Shoe And Replacing With New One As Shown In Furniture Drawing Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 9 Chair Dining Offrs Fd / Map-Ii / 04 Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper, Removing All Spots, Filling With Putty And Applying Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 10 Sofa Set Wooden 5 Seater ( 3+1+1 ) Fd-258, Fd-373Removing The Existing Unserviceable Foam Replacing With New Foam 40 Density 100Mm Thick Covered With Long Cloth Complete All As Specified In Drawing And Directed By Engineer-In-Charge. Note : Tapestry Cloth Will Be Measured And Paid On Relevant Item 11 Sofa Set Wooden 5 Seater ( 3+1+1 ) Fd-258, Fd-373Removing The Existing Unserviceable Tapestry Cloth Of Seat Cushion Replacing With New Tapestry Cloth Of Approved Quality Not Less Than Rs.340 / - Per Metre Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 12 Sofa Set Wooden 5 Seater ( 3+1+1 ) Fd-258, Fd-373Removing The Existing Unserviceable Arm Rest And Replacing With New Teakwood Of Section 70 X 35Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 13 Sofa Set Wooden 5 Seater ( 3+1+1 ) Fd-258, Fd-373Removing The Existing Unserviceable Leg And Replacing With New Teakwood Of Section 70 X 35Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 14 Sofa Set Wooden 5 Seater ( 3+1+1 ) Fd-258 , Fd-373Removing The Existing Unserviceable Seat Ply For Single Seater And Replacing With 12Mm Thick Bwr Phenol Bonded Plywoodcomplete All As Specified In Drawing And Directed By Engineer-In-Charge. 15 Sofa Set Wooden 5 Seater ( 3+1+1 ) Fd-258, Fd-373Removing The Existing Unserviceable Seat Ply For Three Seater And Replacing With 12Mm Thick Bwr Phenol Bonded Plywoodcomplete All As Specified In Drawing And Directed By Engineer-In-Charge. 16 Sofa Set Wooden 5 Seater ( 3+1+1 ) Fd-258, Fd-373Supply And Fix In Repairs New Pvc Ring / Rubber Shoesto The Legs Duly Screwed Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 17 Sofa Set Wooden 3 Seater Fd-258, Fd-373Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty And Polishing With Two Coats Of French Polish Match To Match Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 18 Sofa Set Wooden Single Seater Fd-258, Fd-373Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty And Polishing With Two Coats Of French Polish Match To Match Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 19 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Front Leg And Replacing With New Teakwood Legs Of Section 30 X 55Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 20 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Rear Leg And Replacing With New Teakwood Legs Of Section 30 X 55Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 21 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Left / Right / Rear Rail And Replacing With New One Teakwood Section 30 X 65Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 22 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Front Rail And Replacing With New One Teakwood Section 30 X 65Mmduly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 23 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Side Stiffener For Bottom Legs And Replacing With New One Teakwood Section 25 X 20Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 24 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Centre Stiffener For Bottom Legs And Replacing With New One Teakwood Section 25 X 20Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 25 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Left / Right Armrestand Replacing With New One Teakwood Section 60 X 25Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 26 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Upper / Lower Stiffenerand Replacing With New One Teakwood Section50 X 15Mm Out Of 50 X 35Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 27 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Plastic Cane From Seatand Replacing With Best Quality Of White Plastic Cane 2Mm Wide And 0.4Mm Thick Half Round Gola Type, Without Any Joint, In Godrej Pattern Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 28 Chair Writing Fd-280 / Fd-250Removing The Existing Unserviceable Pvc Ring / Rubber Shoe And Replacing With New One Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 29 Chair Writing Fd-280 / Fd-250Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 30 Chair Dining Jcos / Ors ( Fd / Map-Ii / 05 ) Removing Old Unserviceable / Broken Pvc Seat And Provision Of New Pvc Seat 4Mm Thick And 4 X 10Mm Thick Ribs Moulded Along With Seat In Single Piece With Holes & Screwed With Frame Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 31 Chair Dining Jcos / Ors ( Fd / Map-Ii / 05 ) Removing The Existing Unserviceable Front Leg And Replacing With New Teakwood Legs Of Section 55 X 30Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 32 Chair Dining Jcos / Ors ( Fd / Map-Ii / 05 ) Chair Dining Fd-228Removing The Existing Unserviceable Rear Leg And Replacing With New Teakwood Legs Of Section 30 X 55Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 33 Chair Dining Jcos / Ors ( Fd / Map-Ii / 05 ) Removing Old Broken Centre Stiffener Of Legsbottom And Replacing With New French Polished Teakwood Stiffener Of Legs Bottom Of Size 20 X 25Mm Duly Furnished And Polished Complete All As Specified And Directed By Engineer-In-Charge. 34 Chair Dining Jcos / Ors ( Fd / Map-Ii / 05 ) Removing Old Broken Side Stiffener Of Legsbottom And Replacing With New French Polished Teakwood Stiffener Of Legs Bottom Of Size 20 X 25Mm Duly Furnished And Polished Complete All As Specified And Directed By Engineer-In-Charge. 35 Chair Dining Jcos / Ors ( Fd / Map-Ii / 05 ) Removing Old Broken Pvc Ring / Rubber Shoes And Replacing With New Onecomplete All As Specified In Drawing And Directed By Engineer-In-Charge. 36 Chair Dining Jcos / Ors ( Fd / Map-Ii / 05S&F Providing New Front / Side Rail Of Chair Dining For Supporting Between Side Rail Left And Rightsize 30 X 65Mm X 2 Nos Duly Furnished And Polished Complete All As Specified And Directed By Engineer-In-Charge 37 Chair Dining Jcos / Ors ( Fd / Map-Ii / 05 ) Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 38 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Plastic Cane From Seatand Replacing With Best Quality Of White Plastic Cane 2Mm Wide And 0.4Mm Thick Half Round Gola Type, Without Any Joint, In Godrej Pattern Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 39 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Plastic Cane From Backand Replacing With Best Quality Of White Plastic Cane 2Mm Wide And 0.4Mm Thick Half Round Gola Type, Without Any Joint, In Godrej Pattern Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 40 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Frontlegs And Replacing With New Teakwood Section Of Section 55 X 25Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge 41 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Rear Legs And Replacing With New Teakwood Section Of Section 55 X 25Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge 42 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Arm Rest And Replacing With New Teakwood Section Of Section 65 X 25Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge 43 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Front / Rear Rail And Replacing With New Teakwood Section Of Section 50 X 25Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge 44 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Side Frame And Replacing With New Teakwood Section Of Section 70 X 40Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge 45 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Back Side Frame And Replacing With New Teakwood Section Of Section 55 X 40Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge 46 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Wooden Member And Replacing With New Teakwood Section Of Section 20 X 15Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge 47 Chair Easy Fd-229 / Fd-358Removing The Existing Unserviceable Pvc Ring / Hard Rubber Shoe And Replacing With New One Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 48 Chair Easy Fd-229 / Fd-358Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 49 Chair Dining Fd-228, , Fd-279Removing The Existing Unserviceable Plastic Cane From Seatand Replacing With Best Quality Of White Plastic Cane 2Mm Wide And 0.4Mm Thick Half Round Gola Type, Without Any Joint, In Godrej Pattern Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 50 Chair Dining Fd-228, Fd-279Removing The Existing Unserviceable Front Leg And Replacing With New Teakwood Legs Of Section 55 X 30Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 51 Chair Dining Fd-228, Fd-279Removing The Existing Unserviceable Rear Leg And Replacing With New Teakwood Legs Of Section 55 X 30Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 52 Chair Dining Fd-228Removing The Existing Unserviceable Rear Rail And Replacing With New Teakwood Legs Of Section 65 X 30Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 53 Chair Dining Fd-228Removing The Existing Unserviceable Front / Side Rail And Replacing With New Teakwood Legs Of Section 65 X 30Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 54 Chair Dining Fd-228Removing The Existing Unserviceable Upper / Lower Stiffener For Back And Replacing With New One Teakwood Section45 X 15Mm Out Of 45 X 35Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 55 Chair Dining Fd-228Removing The Existing Unserviceable Centre Stiffener For Bottom Legs And Replacing With New One Teakwood Section 25 X 20Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 56 Chair Dining Fd-228Removing The Existing Unserviceable Side Stiffener For Bottom Legs And Replacing With New One Teakwood Section 25 X 20Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 57 Chair Dining Fd-228Removing The Existing Unserviceable Pvc Ring / Rubber Shoe And Replacing With New One Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 58 Chair Dining Fd-228Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 59 Table Dressing ( Gents ) Fd / E6 / Map-Ii / 16 Removing The Existing Unserviceable Mirror And Replacing With New Mirror, 5.5Mm Thick Electro Copper Plated Mirror Of Polished Sheet Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 60 Table Dressing ( Gents ) Fd / E6 / Map-Ii / 16 Removing The Existing Unserviceable Mirror Back And Replacing With New Back Out Of 12Mm Thick Bwr Phenol Bonded Plywoodcomplete All As Specified In Drawing And Directed By Engineer-In-Charge. 61 Table Dressing ( Gents ) Fd / E6 / Map-Ii / 16 Removing The Existing Unserviceable Shelves And Replacing With 03 Nos Each, 5.5Mm Thick Glass Shelves Supported On And Including Glass Holder Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 62 Table Dressing ( Gents ) Fd / E6 / Map-Ii / 16 Removing The Existing Unserviceable Sides And Replacing With New Side Out Of 18Mm Thick Pre Laminated Particle Board Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 63 Table Dressing ( Gents ) Fd / E6 / Map-Ii / 16 Removing The Existing Unserviceable Hinges And Replacing With 03 Nos Each, 75Mm Thick Ms Hinge Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 64 Table Dressing ( Gents ) Fd / E6 / Map-Ii / 16 Removing The Existing Unserviceable Magnetic Catch And Replacing With Magnetic Catch 02 Nos At Top And Bottom, Inside The Cabinet To Catch Mirror Frame Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 65 Table Dressing ( Gents ) Fd / E6 / Map-Ii / 16 Removing The Existing Unserviceable Teakwood Frame And Replacing With New Teakwood Frame Of Section 38 X 25Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 66 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Top And Replacing With 18Mm Thick Prelaminated Particle Board Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 67 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Drawer Shutter And Replacing With 18Mm Thick Pre-Laminated Particle Board, One Side Lamination, Exterior Grade, Isi Marked With 2 Nos Piano Hinges, 75Mm, Stainless Steel Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 68 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Sides And Replacing With 18Mm Thick Pre-Laminated Particle Board, One Side Lamination, Exterior Grade, Isi Marked Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 69 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Drawer Complete And Replacing New Drawer Complete With 18Mm Thick Pre-Laminated Particle Board And Bottom 6Mm Ply Wood Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 70 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Shutter & Drawer Back And Replacing With 18Mm Thick Pre-Laminated Particle Board, One Side Lamination, Exterior Grade, Isi Marked Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 71 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Centre Shelves And Replacing With 18Mm Prelaminated Particle Board Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 72 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Mirror And Replacing With New Mirror, 5.5Mm Thick Electro Copper Plated Mirror Of Polished Sheet With Tw Framing Of Size 25 X 20Mm Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 73 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Mirror Back And Replacing With New Back Out Of 6Mm Thick Bwr Phenol Bonded Plywoodcomplete All As Specified In Drawing And Directed By Engineer-In-Charge. 74 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Handle And Replacing With 50Mmlong Shaped Ss Handle Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 75 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Channel And Replacing With New Channel ( 02 Nos ) For Drawer Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 76 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Wheel And Replacing With 50Mm Dia New Twin Wheel Castors Of Injection Moulded In Black Nylon Complete All Asspecified And As Directed By Engineer-In-Charge. 77 Dressing Table ( Ladies ) Fd / Map-Ii / 07Removing The Existing Unserviceable Seat Foam And Replacing With 75Mm Thick Urethane Foam With 40 Density Pasted With Adhesive Duly Covered With Tapestry Cloth Of Approved Class, Not Less Than 350 / - Per Rm Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 78 Peg Table Fd-266Removing The Existing Unserviceabletop And Replacing With 18Mm Thick Prelaminated Particle Boardwith 4Mm Thick Teakwood Edging Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 79 Peg Table Fd-266Removing The Existing Unserviceable Leg And Replacing With New Teakwood Legs Of Section 35 X 60Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 80 Peg Table Fd-266Removing The Existing Unserviceable Top Rail And Replacing With New Teakwood Top Rail Of Section 25 X 50Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 81 Peg Table Fd-266Removing The Existing Unserviceable Side Rail And Replacing With New Teakwood Side Rail Of Section 25 X 50Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 82 Peg Table Fd-266Removing The Existing Unserviceable Pvc Ring / Hard Rubber Shoe And Replacing With New One Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 83 Peg Table Fd-266Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 84 Teapoy Fd -352Removing The Existing Unserviceabletop And Replacing With 18Mm Prelaminated Particle Boardwith 4Mm Thick Teakwood Edging Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 85 Teapoy Fd -352Removing The Existing Unserviceableleg And Replacing With New Teakwood Leg 30X60mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 86 Teapoy Fd -352Removing The Existing Unserviceabletop Rail And Replacing With New Teakwoodtop Rail 20X50mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 87 Teapoy Fd -352Removing The Existing Unserviceablelower Rail And Replacing With New Teakwoodlower Rail 20X50mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 88 Teapoy Fd - 352Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 89 Hat Stand With Mirrorfd-233 / Fd-23Removing The Existing Unserviceable Mirror And Replacing With New Mirror, 5.5Mm Thick Electro Copper Plated Mirror Of Polished Sheet With 6Mm X 35Mm Tw Edging Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 90 Hat Stand With Mirrorfd-233 / Fd-23Removing The Existing Unserviceable Peg And Replacing With Copper Oxidised Steel Peg Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 91 Hat Stand With Mirrorfd-233 / Fd-23Removing The Existing Unserviceable Key Plate And Replacing Made Out Of 3Mm Thick Ms Plate Of Size 40 X 25Mm Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 92 Hat Stand With Mirrorfd-233 / Fd-23Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty And Polishing With Two Coats Of French Polish Match To Match Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 93 Bed Charpoy Wooden Drg No : Fd-21 / Fd-246Removing The Existing Unserviceable Top And Replacing With 12Mm Thick Commercial Plywood Isi Marked Size Exact As Mentioned In Drawing, Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 94 Bed Charpoy Wooden Drg No : Fd-21 / Fd-246Removing The Existing Unserviceable Short Rail And Replacing With New Teakwood Side Rail Size And Length As Indicated In Drawing, Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 95 Bed Charpoy Wooden Drg No : Fd-246Removing The Existing Unserviceable Long Rail And Replacing With New Teakwood Long Rail Size And Length As Indicated In Drawing Complete All As Specified In Drawing. 96 Bed With Ply Wood Drg No : Fd-246Removing The Existing Unserviceable Head Rest With Legs And Replacing With New Head Board Including Legs With 3.5 / 4.0Mm Thick Teak Ply Face Both Sides, Including 12 Dia Half Cut Teak Wood Bead Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 97 Bed Charpoy Wooden Drg No : Fd-246Removing The Existing Unserviceable Footboard With Legs And Replacing With Foot Board Including Legs With 3.5 / 4.0Mm Thick Teak Ply Face Both Sides, Including 12 Dia Half Cut Teak Wood Bead Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 98 Bed Charpoy Wooden Drg No : Fd-246Removing The Existing Unserviceable Centre Stiffener And Replacing With New Oneto Support Bed Top Plywood Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 99 Bed Charpoy Wooden Drg No : Fd-246Removing The Existing Unserviceable Corner Block Rail And Replacing With New One Of Size 50 X 100 X 100 Mm Between Rail And Legs For Tightening Of Bed Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 100 Bed Charpoy Wooden Drg No : Fd-246Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 101 Table Centre Fd-274Removing The Existing Unserviceabletop And Replacing With 18Mm Prelaminated Particle Boardwith 4Mm Thick Teakwood Edging Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 102 Table Centre Fd-235Removing The Existing Unserviceable Top Long Rail And Replacing With New Teakwood Rail Of Section 20 X 50Mm Thick Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 103 Table Centre Fd-235Removing The Existing Unserviceable Top Short Rail And Replacing With New Teakwood Rail Of Section 20 X 50Mm Thick Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 104 Table Centre Fd-235Removing The Existing Unserviceable Bottom Rail And Replacing With New Teakwood Bottom Rail Of Section 20 X 50Mm Thick Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 105 Table Centre Fd-235 / Fd-274Removing The Existing Unserviceable Legs And Replacing With New Teakwood Legs Of Section 60 X 30Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 106 Table Centre Fd-274Removing The Unserviceable Stiffener And Replacing With New Teakwood Bottom Rail Of Section 20 X 50Mm Thick Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 107 Table Centre Fd-235 / Fd-274Removing The Existing Unserviceable Pvc Ring / Rubber Shoe And Replacing With New One Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 108 Table Centre Fd-235 / Fd-274Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 109 Table 3 X 2 W / O Drawerremoving The Existing Unserviceabletop And Replacing With 18Mm Thick Prelaminated Particle Boardwith 4Mm Thick Teakwood Edging Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 110 Table 3 X 2 W / O Drawerremoving The Existing Unserviceable Pvc Ring / Rubber Shoe And Replacing With New One Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 111 Table 3 X 2 W / O Drawerpreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 112 Table Bed Sidemap ( Fd / E6 / Map / 15 ) Supply And Fixof Side Panels Made Out Of Prelaminated Board 18 / 19Mm Thick After Taking Out Of Old / Broken / Crackedside Panels Carefully Shape And Size All As Per Drg And Directed By Engineer-In-Charge. 113 Table Bedsidemap ( Fd / E6 / Map / 15 ) Removing The Existing Unserviceable Top And Supply And Fix New Prelaminated Particle Board18 / 19Mm As Per Drawing And Directed By Engineer-In-Charge. 114 Table Bedside Map ( Fd / E6 / Map / 15 ) S & F Cp Brass Handle Of Size 75 Mm Shall Be Provided Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 115 Table Bedside Map ( Fd / E6 / Map / 15 ) S & F Set Of Two Telescopic Channel Shall Be Provided Of Drawer Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 116 Table Bedsidemap ( Fd / E6 / Map / 15 ) S & Fofbackmade Out Of Plywood Bwr 12Mm Thick After Tacking Out Of Broken Back Panels Carefully Shape And Size All As Per Drg And Directed By Engineer-In-Charge. 117 Table Bedsidemap ( Fd / E6 / Map / 15 ) S & Fofbottom Panels Made Out Of Plywood Bwr6mm Thick After Tacking Out Of Broken Bottom Panels Carefully Shape And Size All As Per Drg And Directed By Engineer-In-Charge. 118 Table Bedsidemap ( Fd / E6 / Map / 15 ) S & Fofupper Drawer Made Out Front 18Mm Per Laminated Particle Board , Sides 12Mm Plywood And Bottom6mm Thick After Plywoodtacking Out Of Broken Bottom Panels Carefully Shape And Size All As Per Drg And Directed By Engineer-In-Charge. 119 Table Bedsidemap ( Fd / E6 / Map / 15 ) S & Foflower Drawer Made Out Front 18Mm Per Laminated Particle Board , Sides 12Mm Plywood And Bottom6mm Thick After Plywoodtacking Out Of Broken Bottom Panels Carefully Shape And Size All As Per Drg And Directed By Engineer-In-Charge. 120 Table Bedsidemap ( Fd / E6 / Map / 15 ) S & F18mm U Type Frame Made Out Of Ms Square Pipe ( 18 Gauge ) For Back Oftable Bed Side After Taking Out Of Broken Frame Carefully Shape And Size All As Per Drg And Directed By Engineer-In-Charge. 121 Table Bedsidemap ( Fd / E6 / Map / 15 ) S & Ffront Leg18mmms Square Pipe ( 18 Gauge ) After Taking Out Of Broken Legs Carefully Shape And Size All As Per Drg And Directed By Engineer-In-Charge. 122 Table Dining 1200X900x760mm Fd / Map-Ii / 03Removing The Existing Unserviceable Prelaminated Particle Boardand Replacing With New Pre Laminated 18Mm Thick Prelaminated Particle Board1200 X 900Mm With Tw Lapping All-Round Duly Furnished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 123 Table Dining 1200X900x760mm Fd / Map-Ii / 03Removing The Existing Unserviceable Legs And Replacing With New Teakwood Legs Of Section 45 X 95Mm Thick Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 124 Table Dining 1200X900x760mm Fd / Map-Ii / 03Removing The Existing Unserviceable Long Rail And Replacing With New Teakwood Long Rail Of Section 45 X 100Mm Thick Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 125 Table Dining 1200X900x760mm Fd / Map-Ii / 03Removing The Existing Unserviceable Short Rail And Replacing With New Teakwood Short Rail Of Section 45 X 100Mm Thick Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 126 Table Dining 1200X900x760mm Fd / Map-Ii / 03Removing The Existing Unserviceable Corner Block Rail And Replacing With New One Of Size 50 X 100 X 100 Mm Between Rail And Legs For Tightening Of Bed Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 127 Table Dining 1200X900x760mm Fd / Map-Ii / 03Removing The Existing Unserviceable Pvc Rubber Shoe And Replacing With New One Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 128 Table Dining 1200X900x760mm Fd / Map-Ii / 03Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 129 Table Dining 8 Per Fd-273Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 130 Table Dining 6 Per Fd-273Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 131 Table Writing Fd-275Removing The Existing Unserviceabletop And Replacing With 19Mm Prelaminated Particle Boardwith 4Mm Thick Teakwood Edging Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 132 Table Writing Fd-275Removing The Existing Unserviceable Legs And Replacing With New Teakwood Legs Of Section 55 X 35Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 133 Table Writing Fd-275Removing The Existing Unserviceable Complete Drawer & Shutter Box Replace With New Drawer & Shutter Box With Lock And Key Compete Made Out Of 18Mm Prelaminated Particle Board Both Side Commercial Finish Provided With All Around Complete All As Specified And Directed By Engineer-In-Charge. 134 Table Writing Fd-275Removing The Existing Unserviceable Top Long Rail And Replace With New Rail Made Iind Class Hardteakwood Al 25 X 50Mm Complete All As Specified And Directed By Engineer-In-Charge. 135 Table Writing Fd-275Removing The Existing Unserviceable Top Short Rail And Replace With New Rail Made Iind Class Hardteakwood Al 25 X 50Mm Complete All As Specified And Directed By Engineer-In-Charge. 136 Table Writing Fd-275Removing The Existing Unserviceable Long Stiffener And Replace With New Long Stiffener Made Iind Class Hardteakwood Al 20 X 50Mm Asspecified And Directed By Engineer-In-Charge. 137 Table Writing Fd-275Removing The Existing Unserviceable Stiffener And Replace With New Stiffener Made Iind Class Hardteakwood Al 20 X50mm Asspecified And Directed By Engineer-In-Charge. 138 Table Writing Fd-275Removing The Existing Unserviceable Pvc Rubber Shoe And Replacing With New One Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 139 Table Writing Fd-275Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 140 Side Boardfd-1112Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Of French Polish Match With Existing Polish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 141 Side Board Fd-1112Removing The Existing Unserviceabletop And Replacing With 18Mm Prelaminated Particle Boardwith 4Mm Thick Teakwood Edging Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 142 Side Board Fd-1112Removing The Existing Unserviceableside And Replacing With 18Mm Prelaminated Particle Boardwith 4Mm Thick Teakwood Edging Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 143 Side Board Fd-1112Removing The Existing Unserviceableback And Replacing With 6Mm Plywood Bwr Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 144 Side Board Fd-1112Removing The Existing Unserviceablehandleand S & Fnew Handle Powder Coated 100Mm Ms Handle Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 145 Side Board Fd-1112Removing The Existing Unserviceable Drawerand Replacing With New Drawer Front &Sides 18Mm Particle Board And Bottom Made By 6Mm Plywood Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 146 Side Board Fd-1112Removing The Existing Unserviceableshelves And Replacing With New Shelves 18Mm Prelaminated Particle Board Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 147 Almirah Large Steel- Fd-1031Removing Of Unserviceable Handle Of Any Description And Supplying And Fixing Chromium Plated Handle Of Size 150Mm Long To Almirah Large Steel Complete All Asspecified And As Directed By Engineer-In-Charge.Make Godrej Or Equivalent To Godrej Pattern 148 Almirah Large Steel- Fd-1031Removal Of Unserviceable Locks Of Any Description And Supplying And Fixinglocks Of Grade- Ii Quality And Shall Conform To Is: 729-1979, 6 Lever Brass ( 50Mmx50mm ) Godrej Pattern To Almirah Large Steel With Duplicate Stainless Steel Keys Complete All Asspecified And As Directed By Engineer-In-Charge.Make - Godrej Or Equivalent To Godrej Pattern 149 Almirah Large Steel- Fd-1031Removing Of Unserviceable Cleats And Supplying And Fixing New Cleats Using With 1.6Mm Thick Ms Sheet To Shelves Of Almirah Large Steel Complete All Asspecified And As Directed By Engineer-In-Charge. 150 Almirah Large Steel- Fd-67 / Fd-1031M & L For Removing Old Unserviceable Hinges 75Mm From Almirah Large Steel And Supply & Fix New Hinges 75Mmsame As Per Existing Size And Material By Welding Complete All Asspecified And As Directed By Engineer-In-Charge. 151 Almirah Large Steel- Fd-67 / Fd-1031Removing Old Unserviceable Legs And Supplying And Fixing New Legsof Size 100Mm X 485Mm X 75Mm Made Out Of 1Mm Thick Crca Steel And Welding To Almirah Large Steel Complete All Asspecified And As Directed By Engineer-In-Charge. 152 Almirah Large Steel- Fd-67 / Fd-1031Removing Old Unserviceable Locking Vertical Rodand Supplying And Fixing New Locking Vertical Rod Of 10Mm Ms Rodto Almirah Large Steel Complete All Asspecified And As Directed By Engineer-In-Charge. 153 Almirah Large Steel- Fd-1031Removing Of Unserviceable Shelves From Almirah Large And Supplying And Fixing New Shelves To Almirahlarge Steelwith 1Mm Thick Crca Steel Shelves Complete All Asspecified And As Directed By Engineer-In-Charge. 154 Almirah Large Steel- Fd-1031M & L For Preparing The Surface Of Almirah Large Steel With Shelves By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Painting Both Internally And Externally With Two Coats Of Olive Green Synthetic Enamel Paint Complete All Asspecified And As Directed By Engineer-In-Charge. 155 Almirah Medium / Small Steel- Fd-1032Removing Of Unserviceable Handle Of Any Description And Supplying And Fixing Chromium Plated Handle Of Size 150Mm Long To Almirah Medium / Small Steel Complete All Asspecified And As Directed By Engineer-In-Charge.Make Godrej Or Equivalent To Godrej Pattern 156 Almirahmedium / Small Steel- Fd-1032Removal Of Unserviceable Locks Of Any Description And Supplying And Fixinglocks Of Grade- Ii Quality And Shall Conform To Is: 729-1979, 6 Lever Brass ( 50Mmx50mm ) Godrej Pattern To Almirah Large Steel With Duplicate Stainless Steel Keys Complete All Asspecified And As Directed By Engineer-In-Charge.Make - Godrej Or Equivalent To Godrej Pattern 157 Almirah Medium / Small Steel- Fd-1032Removing Of Unserviceable Cleats And Supplying And Fixing New Cleats Using With 1.6Mm Thick Ms Sheet To Shelves Of Almirah Medium / Small Steel Complete All Asspecified And As Directed By Engineer-In-Charge. 158 Almirah Medium / Small Steel- Fd-1032M & L For Removing Old Unserviceable Hinges 75Mm From Almirah Medium / Small Steel And Supply & Fix New Hinges 75Mmsame As Per Existing Size And Material By Welding Complete All Asspecified And As Directed By Engineer-In-Charge. 159 Almirah Medium / Small Steel- Fd-1032Removing Old Unserviceable Legs And Supplying And Fixing New Legsof Size 100Mmx 400Mm X 75Mm Made Out Of 20 Gauge Ms Sheet And Welding To Almirah Medium And Small Steel Complete All Asspecified And As Directed By Engineer-In-Charge. 160 Almirah Medium / Small Steel- Fd-1032Removing Old Unserviceable Locking Vertical Rodand Supplying And Fixing New Locking Vertical Rod Of 10Mm Ms Rodto Almirah Medium And Small Steel Complete All Asspecified And As Directed By Engineer-In-Charge. 161 Almirah Medium / Small Steel- Fd-1032Removing Of Unserviceable Shelves Fromalmirah Medium And Supplying And Fixing New Shelves To Almirah Medium And Small Steelwith 1Mm Thick Crca Steel Shelvescompleteall As Specified And As Directed By Engineer-In-Charge. 162 Almirah Medium / Small Steel- Fd-67 / Fd-1032M & L For Preparing The Surface Of Almirah Medium / Small With Shelves By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Painting Both Internally And Externally With Two Coats Of Synthetic Enamelpaint Of Approved Shade Complete All Asspecified And As Directed By Engineer-In-Charge. 163 Book Shelf Steel With Glass Shutter Fd-1028 Similar Patternreplacing Unserviceable Glass From Book Shelf Glass Shutter And S & F For Providing Newglass Of 3Mm Thick As Per Existing Patterncomplete All Asspecified And As Directed By Engineer-In-Charge. 164 Book Shelf Steel With Glass Shutter Fd-1028 Similar Patternreplacing Unserviceable Locks From Book Shelf Glass Shutter And S&F For Providing New Locks Of Grade- Ii Quality And Shall Conform To Is: 729-1979, 6 Lever Brass ( 50Mmx50mm ) Godrej Pattern With Duplicate Keys As Per Existing Size And Patterncomplete All Asspecified And As Directed By Engineer-In-Charge. 165 Book Shelf Steel With Glass Shutter Fd-1028 Similar Patternreplacing Unserviceable Handle From Book Shelf Glass Shutter And S&F For Providing Newchromium Plated Steel Handle Of Size 75Mm Complete All Asspecified And As Directed By Engineer-In-Charge. 166 Book Shelf Steel With Glass Shutter Fd-1028 Similar Patternm & L For Preparing The Surface Of Book Shelf Glass Shutter By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Paintingwith Two Coats Of Synthetic Enamel Paintof Olive Green Shade As Approved Complete All Asspecified And As Directed By Engineer-In-Charge. 167 Chair Verandah Fd-19 Similar Patternremoving Theunserviceable Plastic Cane From Seat Of Chair Verandah, Cleaning Tubular Surface Of Chair And M & L For Recaning With 4Mm New Plastic Cane Closely Knitting As Per Approved Mat Pattern Complete All Asspecified And As Directed By Engineer-In-Charge. 168 Chair Verandah Fd-19 Similar Patternremoving Theunserviceable Plastic Cane From Back Of Chair Verandah, Cleaning Tubular Surface Of Chair And M & L For Recaning With 4Mm New Plastic Cane Closely Knitting As Per Approved Mat Pattern Complete All Asspecified And As Directed By Engineer-In-Charge. 169 Chair Verandah Fd-19 Similar Patternremoving Old Unserviceable Pvc Ring / Rubber Of Chair Verandah And Supplying And Fixing New Pvc Ring / Rubbers Suitable For 20Mm Ms Tube Complete All Asspecified And As Directed By Engineer-In-Charge. 170 Chair Verandah Fd-19 Similar Patternm & L For Preparing The Tubular Surface Of Chair Verandah By Scrapping With Emery Paper And Painting With Two Coat Of Synthetic Enamel Paint Of Approved Shade Complete All Asspecified And As Directed By Engineer-In-Charge. 171 Chair Cba Steel Fd-75 ( M ) Similar Pattrnremoving Theunserviceable Seat And Supply And Fix New Seat Of Teak Wood Adjusting Size Duly 4Mmplastic Caned Closely Knitting And Polished With Nut And Bolt Complete All As Specified And Directed By Engineer-In -Charge. 172 Chair Cba Steel Fd-75 ( M ) Similar Pattrnremoving Theunserviceable Back And Supply And Fix New Back Of Teak Wood Adjusting Size Duly 2Mm And Around Lining 4Mm Plastic Caned Closely Knitting And Polished With Nut And Bolt Complete All As Specified And Directed By Engineer-In -Charge. 173 Chair Cba Steel Fd-75 ( M ) Similar Pattrnremoving The Existing Unserviceable Left / Right Armrestand Replacing With New One Teakwood Section 60 X 25Mm Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 174 Chair Cba Steel Fd-75 ( M ) Similar Pattrnremoving Old Unserviceable Pvc Ring / Rubber And Supplying And Fixing New Pvc Ring / Rubbers Complete All Asspecified And As Directed By Engineer-In-Charge. 175 Chair Cba Steel Fd-75 ( M ) Similar Pattrnm & L For Preparing The Surface Of Chair Cba Steel By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Paintingwith Two Coats Of Synthetic Enamel Paint Olive Green Complete All Asspecified And As Directed By Engineer-In-Charge. 176 Chair Cba Steel Fd-75 ( M ) Similar Pattrnremoving Old Unserviceable Pvc Cap And Supplying And Fixing New Pvc Cap For Back Complete All Asspecified And As Directed By Engineer-In-Charge. 177 Chair Cba Steel Fd-75 ( M ) Similar Pattrns& F New Ms Cleat Existing Size Properly Weldedin Ms Pipe Complete All Asspecified And As Directed By Engineer-In-Charge. 178 Chair Writingmapfd / E6 / Map / 12-Similar Patternremoving Old Unserviceable Seat From All Type Of Chair Writing And S & F New Seatof 12Mm Thick Hot Pressed Plywood Upholstered With Polypropylene Fabric And Moulded Polyurethane Foam With Pvc Lipping All Round Complete All Asspecified And As Directed By Engineer-In-Charge. 179 Chair Writingmap-Similar Patternremoving Old Unserviceable Seat Back Fromchair Writing And S & F New Seatof 12Mm Thick Hot Pressed Plywood Upholstered With Polypropylene Fabric And Moulded Polyurethane Foam With Pvc Lipping All Round Complete All Asspecified And As Directed By Engineer-In-Charge. 180 Chair Writing-Mapfd / E6 / Map / 12 Similar Patternremoving Old Unserviceable Polyurethane Pvc Arms Rest Of Chair Revolving And S & F Newpolyurethane Pvc Arms Rest Made Out Of Black Integral Skin Polyurethane Reinforced With Ms Insert Scratch And Weather Resistant 50-70 Shore A? Hardness, Fitted To The Seat With Powder Coated Armrest Brackets Made Of 5Mm Thick Hr Steel All Asspecified And As Directed By Engineer-In-Charge. 181 Chair Writing-Mapfd / E6 / Map / 12 Similar Patternbroken Of Ms Frame For Chair Writing Properly Welded Existing Place Complete All As Per Drg And As Directed By Engineer-In- Charge . 182 Chair Writing-Mapfd / E6 / Map / 12 Similar Patternremoving Old Broken Cleat And S & F New Ms Cleat For Chair Writing As Per Existing Size Welded With Frame Complete As Perdrg And Directed By Engineer-In -Charge . 183 Chair Writng Map Fd / E6 / Map / 12 Similar Pattrnm & L For Preparing The Surface Of Chair Cba Steel By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Paintingwith Two Coats Of Synthetic Enamel Paint Olive Green Complete All Asspecified And As Directed By Engineer-In-Charge. 184 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable Gas Lift From All Type Of Chair Revolving And S & F New Gas Lift Of Chrome Free Cylinder Tube Fixed In Ms Black Powder Coated Outer Central Column Tube 38Mm Dia And 2Mm Thick With 100Mm Stroke Length And Able To Sustain Gas Pressure Of 300 Force Complete All Asspecified And As Directed By Engineer-In-Charge. 185 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable Seat From All Type Of Chair Revolving And S & F New Seatof 12Mm Thick Hot Pressed Plywood Upholstered With Polypropylene Fabric And Moulded Polyurethane Foam With Pvc Lipping All Round Complete All Asspecified And As Directed By Engineer-In-Charge. 186 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable Back From All Type Of Chair Revolving And S & F New Backof 12Mm Thick Hot Pressed Plywood Upholstered With Polypropylene Fabric And Moulded Polyurethane Foam Designed With Contour Lumber Support For Extra Confortwith Pvc Lipping All Round Complete All Asspecified And As Directed By Engineer-In-Charge. 187 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable Castor Wheels Of Chair Revolving And S & F New Twin Wheel Castors Of Injection Moulded In Black Nylon Complete All Asspecified And As Directed By Engineer-In-Charge. 188 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable Polyurethane Pvc Arms Rest Of Chair Revolving And S & F Newpolyurethane Pvc Arms Rest Made Out Of Black Integral Skin Polyurethane Reinforced With Ms Insert Scratch And Weather Resistant 50-70 Shore A? Hardness, Fitted To The Seat With Powder Coated Armrest Brackets Made Of 5Mm Thick Hr Steel All Asspecified And As Directed By Engineer-In-Charge. 189 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable 5 Star Base Of Chair Revolving And S & F New Pedestal Assembly Injection Moulded In Black 30% Glass Filled Nylon 10.5Mm Dia Forged Bright Zinc Coated Ms Castor Pin, Press Fitted Each Prong For Holding Castor & 600Mm Pitch Centre Dia All Asspecified And As Directed By Engineer-In-Charge.Note- Castor Wheel Shall Be Measured And Paid Separately. 190 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable Mechanism With Leverand S & F New Mechnisiam With Lever Complete Assemblyall Asspecified And As Directed By Engineer-In-Charge 191 Chair Verandah- Fd / Map-Ii / 15 ( R ) Removing Of Old Damaged / Unserviceable Seat From Chair Verandah Steel And Supplying And Fixing New Seat Made Out Of Pvc Moulded, Weight Not Less Than 1.85Kg Complete All Asspecified And As Directed By Engineer-In-Charge.Make- Amko 192 Chair Verandah- Fd / Map-Ii / 15 ( R ) Removing Of Old Damaged / Unserviceable Back Forchair Verandah Steel And Supplying And Fixing New Back Made Out Of Pvc Moulded, Weight Not Less Than 1.85Kg Complete All Asspecified And As Directed By Engineer-In-Charge.Make- Amko 193 Chair Verandah- Fd / Map-Ii / 15 ( R ) Removing Old Unserviceable Pvc Ring / Rubber Of Chair Verandah Steel And Supplying And Fixing New Pvc Inner Ring / Rubbers Suitable For 19Mm Ms Tube Complete All Asspecified And As Directed By Engineer-In-Charge. 194 Chair Verandah- Fd / Map-Ii / 15 ( R ) M & L For Preparing The Surface Of Chair Verandah By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Paintingwith Two Coats Of Synthetic Enamel Paint Of Approved Shade Complete All Asspecified And As Directed By Engineer-In-Charge. 195 Table 3 X 2 Steel Fd-1008Removing Of Old Damaged / Unserviceable Table Top From Table 3 X 2 With Drawer Steel And Supplying And Fixing New Table Top Of 17Mm Thick Pre Laminated Particle Prelaminated Particle Board , Exterior Grade With Teakwood Edging All Around Including Polishing To Teakwoodbeading Complete All Asspecified And As Directed By Engineer-In-Charge Complete All Asspecified And As Directed By Engineer-In-Charge. 196 Table 3 X 2 Steel Fd-1008Taking Out Worn Outlegsof Table 3 X 2 With Drawer Without Damaging The Other Components And Supplying And Fixing The New Legs Made Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Legs All As Per Drawing, Complete All Asspecified And As Directed By Engineer-In-Charge. 197 Table 3 X 2 Steel Fd-1008Taking Out Worn Outlong Railof Table 3 X 2 With Drawer Without Damaging The Other Components And Supplying And Fixing The New Top Long Rail Made Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Legs All As Per Drawing, Complete All Asspecified And As Directed By Engineer-In-Charge. 198 Table 3 X 2 Steel Fd-1008Taking Out Worn Outshort Railof Table 3 X 2 With Drawer Without Damaging The Other Components And Supplying And Fixing The New Top Short Rail Made Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Legs All As Per Drawing, Complete All Asspecified And As Directed By Engineer-In-Charge. 199 Table 3 X 2 Steel Fd-1008Taking Out Worn Outstiffenerof Table 3 X 2 With Drawer Without Damaging The Other Components And Supplying And Fixing The New Stiffener Longmade Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Legs All As Per Drawing, Complete All Asspecified And As Directed By Engineer-In-Charge. 200 Table 3 X 2 Steel Fd-1008Taking Out Worn Outshort Stiffenerof Table 3 X 2 With Drawer Without Damaging The Other Components And Supplying And Fixing The New Stiffener Shortmade Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Legs All As Per Drawing, Complete All Asspecified And As Directed By Engineer-In-Charge. 201 Table 3 X 2 Steel Fd-1008Removing Of Unserviceable Drawer With Box Of Table 3 X 2 And Supplying And Fixing New Drawer With Box Of Existing Size, Made Out Of 1Mm Crca Steel Sheet With Side Channels , Back Springs Complete All Asspecified And As Directed By Engineer-In-Charge. 202 Table 3 X 2 Steel Fd-1008Removal Of Unserviceable Locks Of Any Description And Supplying And Fixing Locks Of Grade- Ii Quality And Shall Conform To Is: 729-1979, 6 Lever Brass ( 50Mmx50mm ) Godrej Pattern Totable 3 X 2With Drawer With Duplicate Stainless Steel Keys Complete All Asspecified And As Directed By Engineer-In-Charge.Make - Godrej Or Equivalent To Godrej Pattern 203 Table 3 X 2 Steel Fd-1008Removing Old Unserviceable Pvc Ring / Rubber Of Table 3 X 2 With Drawer And Supplying And Fixing New Pvc Ring / Rubbers Suitable For 25Mm Ms Tube Complete All Asspecified And As Directed By Engineer-In-Charge. 204 Table 3 X 2 Steel Fd-1008M & L For Preparing The Surface By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Paintingwith Two Coats Of Synthetic Enamel Paint Olive Green Complete All Asspecified And As Directed By Engineer-In-Charge. 205 Table 900 X 900 X760mm Steel Fd-1009Removing Of Old Damaged / Unserviceable Table Top From Table 900 X 900 X 760Mm Steel And Supplying And Fixing New Table Top Of 18Mm Thick Prelaminated Particle Boardwith 3M Thick Tw Edging Including Polishing To Teakwoodbeading Complete All Asspecified And As Directed By Engineer-In-Charge. 206 Table 900 X 900 X760mm Steel Fd-1009Removing Old Unserviceable Pvc Ring / Rubber Of Table 900 X 900 X 760Mm And Supplying And Fixing New Rubber Shoe Suitable For 25Mm Ms Tube Complete All Asspecified And As Directed By Engineer-In-Charge. 207 Table 900 X 900 X760mm Steel Fd-1009M & L For Preparing The Surface Of Table 900 X 900 X 760Mm By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Painting Both Internally And Externally With Two Coats Of Synthetic Enamel Paint Ofolive Green Shade Complete All Asspecified And As Directed By Engineer-In-Charge. 208 Table Office Officers Steel Fd-84, Fd-1003Removing Of Existing Broken Table Top Of Table Office Officer Steel And Supplying And Fixing New Table Top Of Size 1.68M X 0.87M Of 18Mm Thick Prelaminated Particle Boardwith 3M Thick Tw Edging Including Polishing To Teakwoodbeading Complete All Asspecified And As Directed By Engineer-In-Charge. 209 Table Office Officers Steel Fd-84, Fd-1003Taking Out Worn Outlegs Of Table Office Officer Without Damaging The Other Components And Supplying And Fixing The New Legs Made Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Legs Complete All Asspecified And As Directed By Engineer-In-Charge. 210 Table Office Officers Steel Fd-84, Fd-1003Taking Out Worn Out Stiffener Of Table Office Officer Without Damaging The Other Components And Supplying And Fixing The New Stiffener Made Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Stiffener Complete All Asspecified And As Directed By Engineer-In-Charge. 211 Table Office Officers Steel Fd-84, Fd-1003Removing Of Unserviceable Drawer Including Drawer Box ( Set Of Three Drawer ) Of Table Office Officer Steel And S & F New Drawer With Box ( Set Of Three ) Boxes Of Existing Size, Made Out Of 1Mm Thick Ms Sheet With Side Channels , Back Springs Complete All Asspecified And As Directed By Engineer-In-Charge. 212 Table Office Officers Steel Fd-84, Fd-1003Removing Of Unserviceable Shelf Of Table Office Officer Steel And Supplying And Fixing New Shelf Made Out Of 1Mm Thick Sheet Of Existing Size Complete All Asspecified And As Directed By Engineer-In-Charge. 213 Table Office Officers Steel Fd-84, Fd-1003Removing Of Unserviceable Shutter Of Table Office Officer Steel And Supplying And Fixing New Shutter Made Out Of 1Mm Thick Sheet Of Existing Size Including Standard Pvc Recessed Handle Complete All Asspecified And As Directed By Engineer-In-Charge. 214 Table Office Officers Steel Fd-84, Fd-1003Removing Of Unserviceable Back Of Shutter / Drawer Of Table Office Officer Steel And Supplying And Fixing New Back Made Out Of 1Mm Thick Sheet Of Existing Size Complete All Asspecified And As Directed By Engineer-In-Charge. 215 Table Office Officers Steel Fd-84, Fd-1003Removing Of Unserviceable Lock Of Any Description And Supplying And Fixing New Locks Of Grade- Ii Quality And Shall Conform To Is: 729-1979, Withbrass 4 Lever With Duplicate Keys As Godrej Patternto Table Office Officer Complete All Asspecified And As Directed By Engineer-In-Charge.Make : Godrej Or Equivalent To Godrej Make 216 Table Office Officers Steel Fd-84, Fd-1003Removing Old Unserviceable Rubber Shoe Of Table Office Officer And Supplying And Fixing New Pvc Ring / Rubbersouter Suitable For 25Mm Ms Tube Complete All Asspecified And As Directed By Engineer-In-Charge. 217 Table Office Officers Steel Fd-84, Fd-1003M & L For Preparing The Surface By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Painting Both Internally And Externally With Two Coats Of Synthetic Enamel Paint Ofolive Green Shade Complete All Asspecified And As Directed By Engineer-In-Charge. 218 Table Office Clerk Steel Fd-84, Fd-1004Removing Of Existing Broken Table Top Of Table Office Clerk Steel And Supplying And Fixing New Table Top Of Size 1.2M X 0.61M Made Out Of 18Mm Thick Prelaminated Particle Boardwith 3M Thick Tw Edging Including Polishing To Teakwoodbeading Complete All Asspecified And As Directed By Engineer-In-Charge. 219 Table Office Clerk Steel Fd-84, Fd-1004Taking Out Worn Out Legs Of Table Office Clerk Steel Without Damaging The Other Components And Supplying And Fixing The New Legs Made Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Legs Complete All Asspecified And As Directed By Engineer-In-Charge. 220 Table Office Clerk Steel Fd-84, Fd-1004Taking Out Worn Outshort Stiffener On Bottom Legs Oftable Office Clerk Steel Without Damaging The Other Components And Supplying And Fixing The New Stiffener Made Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Stiffener Complete All Asspecified And As Directed By Engineer-In-Charge. 221 Table Office Clerk Steel Fd-84, Fd-1004Taking Out Worn Outlong Stiffener On Bottom Legs Oftable Office Clerk Steel Without Damaging The Other Components And Supplying And Fixing The New Stiffener Made Out Of 25Mm Square Mild Steel Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Stiffener Complete All Asspecified And As Directed By Engineer-In-Charge. 222 Table Office Clerk Steel Fd-84, Fd-1004Removing Of Unserviceable Drawers ( Set Of 3 ) Including Drawer Box Oftable Office Clerk Steel And Supplying And Fixing New ( Set Of Three ) Drawer With Box Of Existing Size, Made Out Of 1Mm Thick Ms Sheet With Side Channels , Back Springs Complete All Asspecified And As Directed By Engineer-In-Charge. 223 Table Office Clerk Steel Fd-84, Fd-1004Removing Of Unserviceable Lock Of Any Description And Supplying And Fixing New Locks Of Grade- Ii Quality And Shall Conform To Is: 729-1979, Withbrass 4 Lever With Duplicate Keys As Godrej Patternto Table Office Clerk Complete All Asspecified And As Directed By Engineer-In-Charge.Make : Godrej Or Equivalent To Gore Make 224 Table Office Clerk Steel Fd-84, Fd-1004Removing Old Unserviceable Rubber Shoe Of Table Office Clerk And Supplying And Fixing New Pvc Shoeouter Suitable For 25Mm Ms Tube Complete All Asspecified And As Directed By Engineer-In-Charge. 225 Table Office Clerk Steel Fd-84, Fd-1004M & L For Preparing The Surface By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Painting Both Internally And Externally With Two Coats Of Synthetic Enamel Paint Of Olive Green Shade Complete All Asspecified And As Directed By Engineer-In-Charge. 226 Table Computer- Fd / E6 / Map-Ii / 03Removing Of Old Damaged / Unserviceable Table Top From Table Computer Steel And Supplying And Fixing New Table Top Of 18Mm Thick Pre-Laminated Particle Board, Laminated On Both Sides With 4Mm Thick Teakwood Edging All Around Including Polishing Toteakwoodbeading Complete All Asspecified And As Directed By Engineer-In-Charge Complete All Asspecified And As Directed By Engineer-In-Charge. 227 Table Computer- Fd / E6 / Map-Ii / 03Removing Of Old Damaged / Unserviceable Shelf From Table Computer Steel And Supplying And Fixing New Shelf Of 18Mm Thick Pre-Laminated Particle Board, Laminated On Both Sides Complete All Asspecified And As Directed By Engineer-In-Charge. 228 Table Computer- Fd / E6 / Map-Ii / 03Removing Of Old Damaged / Unserviceable Key Board Tray From Table Computer And Supplying And Fixing New Key Board Tray Of Size 450Mm X 480Mm Of 18Mm Thick Pre-Laminated Particle Board, Laminated On Both Sides Complete All Asspecified And As Directed By Engineer-In-Charge. 229 Table Computer- Fd / E6 / Map-Ii / 03Removing Of Old Damaged / Unserviceable Drawer Box From Table Computer And Supplying And Fixing New Drawer, 75Mm Deep Of 18Mm Thick Pre-Laminated Particle Board, Laminated On Both Sides Complete All Asspecified And As Directed By Engineer-In-Charge. 230 Table Computer- Fd / E6 / Map-Ii / 03Removing Of Old Damaged / Unserviceable Pull Out Tray From Table Computer And Supplying And Fixing New Pull Out Tray Of 18Mm Thick Pre-Laminated Particle Board, Laminated On Both Sides Complete All Asspecified And As Directed By Engineer-In-Charge. 231 Table Computer- Fd / E6 / Map-Ii / 03Removing Of Old Damaged / Unserviceable Knobs From Table Computer And Supplying And Fixing New Knob Made Out Of High Density Material Complete All Asspecified And As Directed By Engineer-In-Charge. 232 Table Computer- Fd / E6 / Map-Ii / 03Removing Of Old Damaged / Unserviceable Side Board From Table Computer And Supplying And Fixing New Side Board Of 18Mm Thick Pre-Laminated Particle Board, Laminated On Both Sides Complete All Asspecified And As Directed By Engineer-In-Charge. 233 Table Computer- Fd / E6 / Map-Ii / 03Removing Of Old Damaged / Unserviceable Nylon Buffers From Table Computer And Supplying And Fixing New Nylon Buffers Made Out Of High Density Material Complete All Asspecified And As Directed By Engineer-In-Charge. 234 Table Computer- Fd / E6 / Map-Ii / 03Removing Of Old Damagedtelescopic Channel Ands& F New Set Of Two Telescopic Channel Fortable Computercomplete All Asspecified And As Directed By Engineer-In-Charge. 235 Table Computer- Fd / E6 / Map-Ii / 03Preparing The Surface Of Table Computer By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Painting Both Internally And Externally With Two Coats Of Black Synthetic Enamel Paint Of Approved Shade Complete All Asspecified And As Directed By Engineer-In-Charge. 236 Double Bed Mattress / Charpoy6-6 X 5 Removing The Existing Unserviceable Head Rest And Replacing With New 19Mm Thick Plywood Head Rest Interior Grade With Teakwood Beading Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 237 Double Bed Mattress / Charpoy6-6 X 5 Removing The Existing Unserviceable Foot Rest And Replacing With New 19Mm Thick Plywood Foot Rest Interior Grade With Teakwood Beading Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 238 Double Bed Mattress / Charpoy6-6 X 5 Removing The Existing Unserviceable Top Ply And Replacing With New 19Mm Thick Plywood Bwr Grade Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 239 Double Bed Mattress / Charpoy6-6 X 5 Removing The Existing Unserviceable Centre Stiffener And Replacing With New Tw 40 X 25Mm Stiffener Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 240 Double Bed Mattress / Charpoy6-6 X 5 Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 241 Table Dressing Ladies ( 2100Mm X 0140Mm X 380Mm ) Removing The Existing Unserviceable Knob And Replacing With 25Mm Dia New Brass Chromium Plated Knob Fixed On Shutter Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 242 Table Dressing Ladies ( 2100Mm X 0140Mm X 380Mm ) Preparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 243 Table Bedside 590Mm X 375Mm X 445Mmremoving The Existing Unserviceable Board Tray And Replacing With New 19Mm Thick Bwr Phenol Bonded Plywood Board Tray Interior Grade With Teakwood Beading Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 244 Table Bedside 590Mm X 375Mm X 445Mmremoving The Existing Unserviceable Back And Replacing With New 19Mm Thick Bwr Phenol Bonded Plywood Back Interior Grade With Teakwood Beading Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 245 Table Bedside 590Mm X 375Mm X 445Mmpreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 246 Luggage Cum Rack 1380X620x610mm - Tpremoving The Existing Unserviceable Side And Replacing With New 19Mm Thick Bwr Phenol Bonded Plywood Back Interior Grade With Teakwood Beading Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 247 Luggage Cum Rack 1380X620x610mm - Tpremoving The Existing Unserviceable Back And Replacing With New 19Mm Thick Bwr Phenol Bonded Plywood Back Interior Grade With Teakwood Beading Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 248 Luggage Cum Rack 1380X620x610mm - Tpremoving The Existing Unserviceable Front And Replacing With New Iind Class Teakwood Duly Furnished And Polished Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 249 Luggage Cum Rack 1380X620x610mm - Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 250 Stool Dressing With Cushion 530X380x450mm - Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 251 Stool Dressing With Cushion 530X380x450mm - Tpremovethe Old Cushionand S & F New Cushion Complete All As Specification And Directed By Engineer -In- Charge. 252 Table Centre With Glass Top 1060X530x440mm- Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 253 Peg Table 460X460x350mm- Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 254 Table Dining 6 Per With / Chair Dining 1520X940x780mm - Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 255 Table Dining With Glass Top 4X4 With / Chair Dining 1520X940x780mm - Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 256 Sofa Single Seater 640X640x760mm - Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 257 Sofa Single Seater 640X640x760mm - Tpremoving The Existing Unserviceable Foam Replacing With New Foam 40 Density 100Mm Thick Covered With Long Cloth Complete All As Specified In Drawing And Directed By Engineer-In-Charge. Note : Tapestry Cloth Will Be Measured And Paid On Relevant Item 258 Sofa Single Seater 640X640x760mm - Tpremoving The Existing Unserviceable Tapestry Cloth Of Seat Cushion Replacing With New Tapestry Cloth Of Approved Quality Not Less Than Rs.340 / - Per Metre Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 259 Sofa 3 Seater W / Cushion Fd- Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 260 Table Writing 1020X610x770mm - Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 261 Table Writing900x600x760mm - Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 262 Chair Revolving High Back- Tp Removing Old Unserviceable Gas Lift From All Type Of Chair Revolving And S & F New Gas Lift Of Chrome Free Cylinder Tube Fixed In Ms Black Powder Coated Outer Central Column Tube 38Mm Dia And 2Mm Thick With 100Mm Stroke Length And Able To Sustain Gas Pressure Of 300 Force Complete All Asspecified And As Directed By Engineer-In-Charge. 263 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable Seat From All Type Of Chair Revolving And S & F New Seatof 12Mm Thick Hot Pressed Plywood Upholstered With Polypropylene Fabric And Moulded Polyurethene Foam With Pvc Lipping All Round Complete All Asspecified And As Directed By Engineer-In-Charge. 264 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable Back From All Type Of Chair Revolving And S & F New Backofpolypropylene Fabric And Moulded Polyurethane Foam Designed With Contour Lumber Support For Extra Confortwith Pvc Lipping All Round Complete All Asspecified And As Directed By Engineer-In-Charge. 265 Chair Computer / Revolving- Tp Similar Patternremoving Old Unserviceable Castor Wheels Of Chair Revolving And S & F New Twin Wheel Castors Of Injection Moulded In Black Nylon Complete All Asspecified And As Directed By Engineer-In-Charge. 266 Chair Revolving- Tp Similar Patternremoving Old Unserviceable Polyurethane Pvc Arms Rest Of Chair Revolving And S & F Newpolyurethane Pvc Arms Rest Made Out Of Black Integral Skin Polyurethane Reinforced With Ms Insert Scratch And Weather Resistant 50-70 Shore A? Hardness, Fitted To The Seat With Powder Coated Armrest Brackets Made Of 5Mm Thick Hr Steel All Asspecified And As Directed By Engineer-In-Charge. 267 Chair Revolving- Tp Similar Patternremoving Old Unserviceable 5 Star Base Of Chair Revolving And S & F New Pedestal Assembly Injection Moulded In Black 30% Glass Filled Nylon 10.5Mm Dia Forged Bright Zinc Coated Ms Castor Pin, Press Fitted Each Prong For Holding Castor & 600Mm Pitch Centre Dia All Asspecified And As Directed By Engineer-In-Charge.Note- Castor Wheel Shall Be Measured And Paid Separately. 268 Side Board 1070X610x760mm - Tppreparing / Cleaning Of Old Decorated Surface / Rubbing By Emery Paper Removing All Spots, Filling With Putty, Two Coats Ofpolish Glossy Finish With Mrf Corp Vapocure Paint ( Durothane Pu ) With Colour Of High Class Finish Complete All As Specified In Drawing And Directed By Engineer-In-Charge. 269 Table Dining Ors -Fd-165 ( M ) Similar Patterntaking Out Worn Out Legs Without Damaging The Other Components Of Table Dining Ors And Supplying And Fixing The New Legs Made Out Of 25Mm Square Ms Tubing Of 16 Gauge And Fixing The Same By Welding To The Table In Place Of Removed Legs Includingtwo Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Over Existing Steel Frame Complete All Asspecified And As Directed By Engineer-In-Charge. 270 All As Per Item No. 276 Described Here-In-Before But Top Rails Long 271 All As Per Item No. 276 Described Here-In-Before But Top Rails Short 272 All As Per Item No. 276 Described Here-In-Before But Stiffeners Long 273 All As Per Item No. 276 Described Here-In-Before But Stiffeners Short 274 Removing Of Existing Broken Table Top Of Table Dining Or Sand Supplying And Fixing New Table Top Made Out Of 18Mm Thick Pre-Laminated Particle Board, Laminated On One Side With 4Mm Thick Teakwood Edging All Around Including Polishing To Teakwoodbeading And Fixing With Suitable Size Of Screws To Table Frame Including One Coat Of Black Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Over Existing Steel Frame Complete All Asspecified And As Directed By Engineer-In-Charge. 275 Table Dining Ors Fd-165Removing Old Unserviceable Pvc Ring / Rubber Of Table Dining Ors And Supplying And Fixing New Pvc Ring / Rubbersouter Suitable For 25Mm Ms Tube Complete All Asspecified And As Directed By Engineer-In-Charge. 276 Table Dining Ors -Fd-165 ( M ) Similar Patternm & L For Preparing The Surface By Scrapping With Emery Paper, Filling Holes With Putty Wherever Required And Painting Both Internally And Externally With Two Coats Of Synthetic Enamel Paint Of Olive Green Shade Complete All Asspecified And As Directed By Engineer-In-Charge. 277 Rack Steel With Adj Shelves 1830X1830x600 - Tppreparation / Cleaning Of Existing Decorated Surface Of Rack Steel With 5 Adj Shelves 1830X1830x600mm Rubbing By Emery Paper, Removing All Spots, Filling With Putty, Spray Painting With Two Coat Of Synthetic Enamel Olive Greencomplete All Asspecified And As Directed By Engineer-In-Charge 278 All As Per Item No. 277 Described Here-In-Before But For Locker Bed Side Steel Fd-1032 279 All As Per Item No. 277 Described Here-In-Before But For Book Shelf Open Large Steel Fd69 ( M ) 280 All As Per Item No. 277 Described Here-In-Before But For Side Rack With Tray Steel Fd-97 281 All As Per Item No. 277 Described Here-In-Before But For Rack Shoe Steel Fd / E6 / Map / 02R 282 Charpoy Ip With Har Top Fd / E6 / Map / 01Removing Of Oldplywood 12 Mm And Supplying And Fixing New Plywood Bwr 12Mm Commercialtighting With Nut Bolt And Washer For Charpoyip With Hard Top All As Per Drg And Directed By Engineer - In - Charge 283 Table Centre With Glass Top - Fd-375 / Similar Patternremoving Old Unserviceable Glass Top And Supply & Fix New Glass Top With 10Mm Thick Tinted Glass Complete All Asspecified And As Directed By Engineer-In-Charge. 284 Table Centre With Glass Top - Fd-375 / Similar Patternremoving Old Vacuum Rubber Shoe And Supply & Fix New Vacuum Rubber Shoe Complete All Asspecified And As Directed By Engineer-In-Charge. 285 Charpoy Gi Pipe Nylon Niwar Fd -220Removing The Existing All Unserviceable Nylon Niwar From Gi Pipe Charpoy, And Replacing By S & F New Plywood 1980X900x12mm Thick Plywood Including Providingof 2Nos Of Square Ms Tubesof Size 32Mmx32mmx16 Gauge Thick, 900Mm Long ( Appx ) And Providing 3 Nos Of Nut And Bolt Of Size 50Mmx6mm To Fix The Plywood On Each Tubes Included Making Holes , Welding The Square Tubes Between Two Long Rails At Equal Space To The Centre , 2 Nos Ms Plate Of Size Of 60Mm Long X 50 Mm Wide X3mm Thick Included Making Holes And Providing2 Nos Nut And Bolt Of Size 50Mm X 6Mm Each ( Total 4 Nos Plates, Nut And Bolt ) Welding At Inner Postionof Both Short Rails Each At Equal Space Complete All As Specified And As Directed By Engineer -In-Charge. 286 Charpoy Gi Pipe Nylon Niwar Fd -220Removing The Existing Damaged Long Rail From Gi Pipe Charpoy And Replacing With New Long Rail Made Of Gi Pipe 32Mm Dia Medium Grade Isi And Making Necessary Threading On Both Side Of The Long Rail, To Fit Exactly Inside Gi Elbow Complete All As Specified And As Directed By Engineer In- Charge. Note :- The Remaining Length Of Gi Tube Obtain Fromthis Item After Converted To One Short Rail And One Leg Will Be Handed Over To Contractoras Iron Scrap And Recovered From Sch Of Creditmake :- Tata, Jindle / Swastik / Zenith 287 Charpoy Gi Pipe Nylon Niwar Fd -220Removing The Existing Damaged Short Rail From Gi Pipe Charpoy And Replacingthem With Short Railmade Out / Converted From Retrieved Long Rail From Item No - 91Mentioned Above And Makingnecessary Threadingarrangement On Both Side Of The Short Rail, To Fit Exactly Inside Gi Elbow Complete All As Specifiedand As Directed By Engineer -In-Charge Note :- The Remaining Length Of Gi Tube Obtain Fromthis Item After Converted To One Leg Will Be Handed Over To Contractoras Iron Scrap And Recovered From Sch Of Credit 288 Charpoy Gi Pipe Nylon Niwar Fd -220Removing The Existing Damaged Leg From Gi Pipe Charpoy And Replacingthem With Legmade Out / Converted From Retrieved Long Rail From Item No - 91 & 92 Mentioned Above And Makingnecessary Threadingarrangement, To Fit Exactly Inside Gi Elbow Complete All As Specifiedand As Directed By Engineer -In-Charge 289 Charpy Gi Pipe Nylon Niwar Fd -220Removing Damaged / Broken Gi Elbow And S & F New Gi Elbow32 Mmand Tightening Complete All As Specified And As Directed By Engineer - In - Charge 290 Charpy Gi Pipe Nylon Niwar Fd -220Removing Damaged / Broken Check Nutselbow And S & F New Gi Check Nuts 6Mm Thick And 32Mm Diaand Tightening Complete All As Specified And As Directed By Engineer - In - Charge 291 Chair Revolving High Back Pch 9602 ( Conference-Tp ) Removing Old Unserviceable Arms Rest Made Out Of Black Integral Skin Reinforced With Ms Insert Scratch And Weather Resistant 50-70 Shore A Hardness, Fitted To The Seat With Powder Coated Arm Rest Brackets Made Of 5Mm Thick Hr Steel Complete All Asspecified And As Directed By Engineer-In-Charge. 292 Adj Steel Shelving Rack Close Type 2175X900x500 - Tppreparation / Cleaning Of Existing Decorated Surface Of Rack Steel With 5 Adj Shelves, Rubbing By Emery Paper, Removing All Spots, Filling With Putty, Spray Painting With Two Coat Of Synthetic Enamel Olive Greencomplete All Asspecified And As Directed By Engineer-In-Charge 293 All As Per Item No. 292 Described Here-In-Before But For Book Shelf Open Large Steel Fd69 ( M ) 294 All As Per Item No. 292 Described Here-In-Before But For Side Rack With Tray Steel Fd-97 295 All As Per Item No. 292 Described Here-In-Before But For Rack Steel 6 Tier 296 Note:Deduct Credit For Demolished / Dismantled Material Of Rs. ( - ) 24408.00 ( Minus ) As Listed In Schedule Of Credit.Tenderers Will Not Quote Against This Item Being A Tentative Amount To Be Considered To Arrive At The Contract Sum

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	02-01-2024	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	09-01-2024

INR 500 /-

INR 64000.0 /-

INR 32 Lakhs /-