}

Tender For Scheme For Replacement Of Old Existing 0.4 Acsr Conductor By Equivalent Aaac Htls Conductor Along With Suitable Hardware, Accessories For 220Kv Talegaon Ambi-Pgcil Line And 220Kv Talegaon Ambi-Urse Line Ckt 1 & 2 Under Ehv O&M Division-Ii, , Pune-Maharashtra

Maharashtra State Electricity Transmission Company Ltd has published Tender For Scheme For Replacement Of Old Existing 0.4 Acsr Conductor By Equivalent Aaac Htls Conductor Along With Suitable Hardware, Accessories For 220Kv Talegaon Ambi-Pgcil Line And 220Kv Talegaon Ambi-Urse Line Ckt 1 & 2 Under Ehv O&M Division-Ii, . Submission Date for this Tender is 22-12-2023. Clamps Tenders in Pune Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

41017277
Tender For Scheme For Replacement Of Old Existing 0.4 Acsr Conductor By Equivalent Aaac Htls Conductor Along With Suitable Hardware, Accessories For 220Kv Talegaon Ambi-Pgcil Line And 220Kv Talegaon Ambi-Urse Line Ckt 1 & 2 Under Ehv O&M Division-Ii,
Open Tender
Indian
Maharashtra
Pune
22-12-2023

Tender Details

Tender For Scheme For Replacement Of Old Existing 0.4 Acsr Conductor By Equivalent Aaac Htls Conductor Along With Suitable Hardware, Accessories For 220Kv Talegaon Ambi-Pgcil Line And 220Kv Talegaon Ambi-Urse Line Ckt 1 & 2 Under Ehv O&M Division-Ii, Pune -A Supply Part 1 Supply of AAAC HTLS Conductor equivalent to 0.4 ACSR conductor can be strung on exiting tower (including 1% sag and wastage) and as per following specification A. Cross Section in sq.mm- >=484.5 B. Conductor diameter in mm- Not exceeding 28.62mm & not less than 25 mm C. Weight in kg/km- <=1337 D. Ultimate Tensile strength in kN- >=146.03 E. DC Resistance ohm/km at 20 degree celsius- <0.0706 F. Max. Operating Temp- For the Current carrying capacity required for the offered conductor, the temperature shall be in such limit, which shall not disturb the properties of the conductor, shall not increase sag. G. Min. Current carrying capacity at Max. Temp.(in Amp)- 1638 H. Sag in meters at Max. Temp.- <=9.24 I. Span in meters- 350 -Supply of Hardware suitable for, above mentioned ACCC HTLS conductor connecting to insulators including all accessories -2 SSN H/w 3 STN H/w 4 DSN H/w 5 DTN H/w 6 Vibration Damper 7 Mid Span Joint 8 Repair Sleeve 9 T clamp for both end 10 Terminal Pads with/WO holes B Erection Part 1 Stringing of 3ph HTLS Conductor

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail