Tender For Annual Plan-2023-24 Pzr Bp Punnathadam Colony Samskarika Kendram Renovation Panjal Gp-Pr.No:153 / 2024-General Civil Work; Trusswork 2 50.10.2:Steel Work For Purlin / Single Section With G I Pipes Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 3 4.1.3:Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:2:4 ( Cement : 2 Coarse Sand ( Zone-Iii ) : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 4 5.9.6:Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts 5 12.4.2:Providing Ridges Or Hips Width 60 Cm Overall Width Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm / M2 6 Od185010 / 2023-2024:Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Ofcorrugation As Approved By Engineer-In-Charge ) 0.35 Mm ( +0.05% ) , Total Coatedthickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side. Of The Sheet And Polyester Top Coat 15-18 Microns.Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratchesduring Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desiredby Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Ofsize ( 5.5X55mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Orcurved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting Tosize And Shape Wherever Required. 7 10.25.2:Item Shifted To Sub Head 14 As Item 14.73Item Shifted To Head 14 As Item 14.74Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 8 Od243047 / 2023-2024:Supplying And Fixing Half Split Pvc Gutter 150 Mm Size. With Ms Flats 25Mm X 5Mm Size @ 60 Cm C / C Fixing On Roof Members ( Purling Or Rafter ) , Bolts, Nuts And Washers Etc., Including Making Necessary Connections With Rain Water Pipes Complete. 9 21.1.1.2:Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) :For Fixed Portionpowder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 10 21.3.1:Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) :With Float Glass Panes Of 4.0 Mm Thickness 11 21.1.2.2:For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 12 Toilet 13 60.5.3:Dowel Bars - Supplying And Providing Ms Dowel Bars Of Size 25 Mm Dia Of 2.0M Long ( 1M In Rock And 1M In Concrete ) Including Drilling Holes Of 30Mm Dia And Filling The Gap With Cement Grout ( 0.50Kg / Each ) Etc Complete 14 2.25:Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundation Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M. 15 5.1.2:Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level:1:1:5:3 ( 1 Cement 1.5 Coarse Sand :3 Graded Stone Aggregate 20 Mm Nominal Size 16 50.6.1.5:Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 30X20x20cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement : 6 Coarse Sand ) Etc Complete 17 Od259191 / 2023-2024: Pressed Steel Window And Ventilators Of Standard Pattern With Frames As Per Profile Of Sections 82X 62Mm Embossed Sheet Shutter 50X 20Mm Special Channel ( Reverse And Beading ) Shutter, 12Mm Dia Rod, 25 X 5Mm Flat With 75Mm Ss Hinges, 50Mm Ss Hook, 125Mm Ss Stay And Handlews For Wind With Section 105 X60mm Using 16 G ( 1.2Mm Thick Crca ) Sheet And Shutter Made Of Sections 75 *30Cm Outer Styles And Horizontal Members And Then Inserted With Stiffened Sheet 26 Cr With Zincromat Primer 18 10.5.2:Providing And Fixing 1 Mm Thick M.S. Sheet Door With Frame Of 40X40x6 Mm Angle Iron And 3 Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer.Using Flats 30X6 Mm For Diagonal Braces And Central Cross Piece 19 21.3.1:Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) :With Float Glass Panes Of 4.0 Mm Thickness 20 5.3:Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs, Having Slope Up To 15<Sup>0< / Sup> Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . 21 5.9.5:Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers 22 5.9.3:Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Suspended Floors, Roofs, Landings, Balconies And Access Platform 23 5.22.6:Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 24 4.1.8:Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Nominal Size ) 25 13.1.1:12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand ) 26 13.16.1:6 Mm Cement Plaster Of Mix:1:3 ( 1 Cement : 3 Fine Sand ) 27 13.43.1:Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 28 13.61.1:Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 29 11.38:Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) , Of Ist Quality Conforming To Is : 15622, Of Approved Make, In All Colours, Shades, Except White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. 30 11.36:Providing And Fixing I St Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer -In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 31 17.2.2:Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid 32 17.7.1:Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 33 50.17.1.3:Supplying And Fixing Cp Towel Rod 60Cm Or Nearest Available Length Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 34 50.18.7.2.2:Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer -In-Charge 20 Mm Dia 10 Kgf / Cm2- Internal Work - Exposed On Wall 35 50.18.9.9.2:Providing And Fixing Pvc Pipes Includes Joints Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 110 Mm Dia 4 Kg / Cm2 36 50.18.9.14.2:Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 6 Kgf / Cm2 - External Work - Exposed On Wall 37 50.18.9.22.8:Providing And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -110 Mm Dia Vent Cowl 38 18.48:Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank :Isi 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 39 51.19.St3:Supplying And Installing Ready Made Pvc Septic Tank Including The Cost Of Carriage, Trenching, Placing At The Level Below Ground Level As Specified As Per The Direction Of Engineer In Charge ( Provision For Cc / Rcc / Sand / 06Mm Aggregate For The Preparation Of Bed Shall Be Paid Separately ) <Br> 3. 25 To Below 35 Flush Capacity 40 Od184149 / 2023-2024:Supply And Fitting Steel Tap Of Approved Quality 41 Od259348 / 2023-2024:Supplying And Fixing Ready Made Soak Pit Of Size 90*90*90 Cm , Including Conveyance And Fixing Etc. Complete.
